The cyclodimerisation of 3-methyl-2-butenenitrile

3-Methyl-2-butenenitrile (1) cyclodimerised on treatment with lithium diisopropylamide in dimethoxyethane at temperatures between ?78°C and 0°C to 3-amino-4-cyano-1,5,5-trimethyl-1,3-cyclohexadiene (2) the structure of which was established by acid hydrolysis to the known 4-cyano-1,5,5-trimethyl-1-cyclohexene-3-one (3).     

Artifacts in T(1rho)-weighted imaging: correction with a self-compensating spin-locking pulse

Significant artifacts arise in T(1rho)-weighted imaging when nutation angles suffer small deviations from their expected values. These artifacts vary with spin-locking time and amplitude, severely limiting attempts to perform quantitative imaging or measurement of T(1rho) relaxation times. A theoretical model explaining the origin of these artifacts is presented in the context of a T(1rho)-prepared fast spin-echo imaging sequence. Experimentally obtained artifacts are compared to those predicted by theory and related to B(1) inhomogeneity. Finally, a "self-compensating" spin-locking preparatory pulse cluster is presented, in which the second half of the spin-locking pulse is phase-shifted by 180 degrees. Use of this pulse sequence maintains relatively uniform signal intensity despite large variations in flip angle, greatly reducing artifacts in T(1rho)-weighted imaging.     

Conical parametric scattering of a single extraordinary beam in BaTiO3 crystal

In this paper, the parametric scattering of a single extraordinary polarized beam of laser in BaTiO₃ photorefractive crystal has been investigated experimentally and theoretically. The resulting pattern consists of beam fanning, isotropic ring, and anisotropic one. Among all parts of scattering pattern, isotropic ring has not been studied as much as beam fanning and anisotropic ring, and there still are some differences in reports about it. Therefore, the study has mainly focused on this part. In this experimental configuration, isotropic ring is just visible in positive angles although the other parts of parametric scattering pattern can be visible from behind and in front of the crystal. In addition to steady state pattern in forward and backward directions, its transient behavior with the rotation of crystal has been studied. The results of experiments have been analyzed carefully, and their theoretical explanations have been presented based on the standard theory of parametric scattering in photorefractive crystals. It has been shown that this configuration corresponds to the so called parametric B-process scattering.     

T1rho-weighted MRI using a surface coil to transmit spin-lock pulses

T1rho-weighted MRI is a novel basis for generating tissue contrast. However, it suffers from sensitivity to B1 inhomogeneity. First, excitation with a spatially varying B1 causes flip-angle artifacts and second, spin locking with an inhomogeneous B1 results in non-uniform T1rho contrast. In this study, we overcome the former complication with a specially designed spin-locking pulse sequence and we successfully obtain T1rho-weighted images with a surface coil. In this pulse sequence, the spin-lock pulse was divided into segments of equal duration and alternating phase. This "self-compensating" T1rho-preparatory pulse sequence was analyzed and the effect of an inhomogeneous B1 field was simulated using the Bloch equations. T1rho-weighted MR images of a phantom and a human knee joint in vivo were obtained on a clinical scanner with a surface coil to demonstrate the utility of the pulse sequence. The self-compensating T1rho-prepared pulses sequence resulted in substantially reduced image artifacts compared to the conventional, single-phase spin-lock pulse.     

An MR imaging method for simultaneous measurement of gaseous diffusion constant and longitudinal relaxation time

A magnetic resonance imaging method for simultaneous and accurate determination of gaseous diffusion constant and longitudinal relaxation time is presented. The method is based on direct observation of diffusive motion. Initially, a slice-selective saturation of helium-3 (3He) spins was performed on a 3He/O2 phantom (9 atm/2 atm). A time-delay interval was introduced after saturation, allowing spins to diffuse in and out of the labeled slice. Following the delay interval a one-dimensional (1-D) projection image of the phantom was acquired. A series of 21 images was collected, each subsequent image having been acquired with an increased delay interval. Gradual spreading of the slice boundaries due to diffusion was thus observed. The projection profiles were fit to a solution of the Bloch equation corrected for diffusive motion. The fitting procedure yielded a value of D3He = 0.1562+/-0.0013 cm2/s, in good agreement with a measurement obtained with a modified version of the standard pulsed-field gradient technique. The method also enabled us to accurately measure the longitudinal relaxation of 3He spins by fitting the change of the total area under the projection profiles to an exponential. A value of T1 = 1.67 s (2 T field) was recorded, in excellent agreement with an inversion recovery measurement.     

Self-chemical ionization of diethylzinc

The self-chemical ionization of diethylzinc is examined by Fourier transform ion cyclotron resonance (FT-ICR) mass spectrometry and semiempirical molecular orbital calculations. Electron impact of diethylzinc neutral produces the radical cation, C(4)H(15)Zn(+) (m/z x 122), which reacts further with the neutral (C(2)H(5))(2)Zn to give the following product ions: Zn(+) (m/z x 64), C(2)H(5)Zn(+) (m/z x 93), C(4)H(9)Zn(+) (m/z x 121), C(4)H(11)Zn(2)(+) (m/z x 187), and C(6)H(15)Zn(2)(+) (m/z x 215). To determine the structure and pathways for production of these ions, monoisotopic (12)C(4)H(15)(64)Zn(+), (64)Zn(+) and (12)C(2)H(5)(64)Zn(+) were individually isolated and reacted with the neutral background. We also performed semiempirical molecular orbital calculations (ZINDO/1). The molecular orbital calculations and experimental data are consistent in predicting that the ethyl group on the diethylzinc cation carries the positive charge. Copyright 1999 John Wiley & Sons, Ltd.     

怀孕期头发中一些元素含量的变化趋势

用同步辐射激发X射线荧光分析,对11个产妇怀孕期间头发内一些元素含量的变化趋势进行了测量,在各自对比的基础上,得到了一些结果。     

T1ρ-weighted MRI using a surface coil to transmit spin-lock pulses

T1rho-weighted MRI is a novel basis for generating tissue contrast. However, it suffers from sensitivity to B1 inhomogeneity. First, excitation with a spatially varying B1 causes flip-angle artifacts and second, spin locking with an inhomogeneous B1 results in non-uniform T1rho contrast. In this study, we overcome the former complication with a specially designed spin-locking pulse sequence and we successfully obtain T1rho-weighted images with a surface coil. In this pulse sequence, the spin-lock pulse was divided into segments of equal duration and alternating phase. This "self-compensating" T1rho-preparatory pulse sequence was analyzed and the effect of an inhomogeneous B1 field was simulated using the Bloch equations. T1rho-weighted MR images of a phantom and a human knee joint in vivo were obtained on a clinical scanner with a surface coil to demonstrate the utility of the pulse sequence. The self-compensating T1rho-prepared pulses sequence resulted in substantially reduced image artifacts compared to the conventional, single-phase spin-lock pulse.     

17O-decoupled (1)H spectroscopy and imaging with a surface coil: STEAM decoupling

(17)O-decoupled (1)H spin-echo imaging has been reported as a means of indirect (17)O detection, with potential application to measurement of blood flow and metabolism. In its current form, (17)O decoupling requires large RF amplitudes and a 180 degrees refocusing pulse, complicating its application in volume and surface coils, respectively. To overcome this problem, we have developed an (17)O-decoupled proton stimulated echo sequence ("STEAM decoupling") to allow (17)O detection with a surface coil. A high B(1) amplitude is easily generated, allowing complete decoupling of (17)O and (1)H. Slice-selective, (17)O-decoupled (1)H imaging is readily performed and the sequence is easily adapted for localized spectroscopy. Intrinsic correction for variations in B(1) and further compensation for B(1) inhomogeneity are discussed.     

In silico targeting PAD4 for the treatment of rheumatoid arthritis

Structural Chemistry - Rheumatoid arthritis (RA) is an autoimmune disorder that causes chronic inflammation with periodic bursts of activity in multiple synovial joints which lead to irreversible...