Degradative chain transfer in vinyl acetate polymerizations using toluene as solvent

In this work, we propose that retardation in vinyl acetate polymerization rate in the presence of toluene is due to degradative chain transfer. The transfer constant to toluene (C_trs) determined using the Mayo method is equal to 3.8 × 10^?3, which is remarkably similar to the value calculated from the rate data, assuming degradative chain transfer (2.7 × 10^?3). Simulations, including chain‐length‐dependent termination, were carried out to compare our degradative chain transfer model with experimental results. The conversion–time profiles showed excellent agreement between experiment and simulation. Good agreement was found for the M_n data as a function of conversion. The experimental and simulation data strongly support the postulate that degradative chain transfer is the dominant kinetic mechanism. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3620–3625, 2007     

Statistical Analysis of the Effect of Mineral Admixtures on the Strength of the Interfacial Transition Zone

Microscopic evidence indicates that the thickness of the interfacial transition zone (ITZ) between the aggregate and the cement paste is modified when mineral admixtures partially replace portland cement. Unfortunately, there is limited information on the significance of these microscopic modifications to the mechanical properties of the ITZ. This research reports experimental results on the shear and tensile strength of the ITZ as affected by the addition of the following mineral admixtures: silica fume, fly ash, and natural pozzolan. Statistical analysis was used to identify the significant parameters affecting the tensile and shear strength of the ITZ. Experimental results indicate that not only does the incorporation of silica fume and fly ash increase the strength of the ITZ, these mineral admixtures have a greater influence on the strength increase of the ITZ than in the strength increase of the cement paste.     

Implementation of recycling routes for scanning probe microscopy tips.

In this work, effective, yet simple, recycling mechanisms for used scanning probe microscopy (SPM) tips were implemented. Comprising a tip profile characterization methodology and specific cleaning procedures, which decontaminate SPM tips whether the contamination nature is known or not, such routes were optimized during numerous tests with brand new, previously used, and already discarded categories of SPM tips. The results show that if the used tip suffered contamination only, but no physical damages, during its scanning lifetime, it becomes readily available for reutilization after the cleansing process, characterizing a recycling route. On the other hand, if the tip went through wear and breakages during its utilization, it still can be decontaminated, but may not be directly reutilized due to its inadequate physical profile. Nevertheless, the methodology developed in this work may yet be applied as part of a more complex recycling route.     

QSAR modeling with the electrotopological state indices: Corticosteroids

A structure-activity analysis of a series of steroids binding to corticosteroid-binding globulin was made using the electrotopological state index for each atom in the molecule. Two indices were found to correlate well with the binding affinity. The indices encode structural characteristics in the A and the D rings of the steroids in the study. One of the indices was formulated as the difference between two indices in the A ring. The two were not intercorrelated, suggesting that the composite index signals the influence of structure changes in or near the A ring that can be monitored by the composite index. This is a new observation using this structure-activity method. It is suggested that this model makes some contributions towards detection of the pharmacophore.     

Surface characterization of recycled tire rubber to be used in cement paste matrix

The surface modification of tire rubber after treatment with saturated NaOH aqueous solution was investigated by HATR infrared analysis, potentiometric titration, and contact angle measurements. Infrared analysis of the powdered treated rubber showed a decrease in absorption at 1540, 1450, and 1395 cm(-1). This decrease is attributed to the removal of zinc stearate, an additive present in tire formulations that often migrates and diffuses to the surface, resulting in poor adhesion between the rubber and other materials. The potentiometric titration of the suspension of powdered rubber in 0.1 M NaCl showed that more hydrochloric acid was consumed by the untreated rubber, most likely a result of the hyrdrolysis of the zinc stearate to the organic acid. Contact angles of flat tire pieces showed an homogeneity enhancement of the treated rubber surface. The decrease of the zinc stearate on the treated rubber surface explains the improvement in the adhesion of this material to the cement matrix, observed in a previous research. The promising results of this study are a starting point for future research on incorporating rubber particles into cementitious materials as a means of successfully utilizing the vast amounts of tire waste currently in landfills.     

Reaction of allylsilanes and allylstannanes with alkynes catalyzed by electrophilic late transition metal chlorides

The intramolecular reaction of allylsilanes and allylstannanes with alkynes proceeds catalytically in the presence of Pt(II), Pd(II), Ru(II), and Au(III) chlorides. Although more limited, AgOTf also catalyzes the cyclization. Usually, PtCl2 as the catalyst in methanol or acetone gives the best results. The reaction proceeds by exo attack of the allyl nucleophile on the alkyne to form five- or six-membered ring carbocycles. The reaction generally proceeds with anti stereoselectivity. However, a terminally substituted trimethylsilyl derivative reacts by a syn-type addition. The intermediate alkenylpalladium complex has been trapped with allyl chloride to form an allylated derivative with an additional carbon-carbon bond.     

Substituent effects on the photophysical properties of pterin derivatives in acidic and alkaline aqueous solutions

Pterins are heterocyclic compounds with important biological functions, and most of them may exist in two acid-base forms in the pH range between 3 and 13 in aqueous solution. In this work, the photophysical properties of acid and basic forms of six compounds of the pterin family (6-hydroxymethylpterin [HPT], 6-methylpterin [MPT], 6,7-dimethylpterin [DPT], rhamnopterin [RPT], N-methylfolic acid [MFA], and pteroic acid [PA]) have been studied. The effects of the chemical nature of the substituents at position 6 of the pterin moiety and the effects of the pH on the absorption and emission properties are analyzed. The fluorescence characteristics (spectra, quantum yields, lifetimes) of these compounds have been investigated using the single-photon-counting technique. Results obtained for pterin derivatives containing small substituents with 1 carbon atom (HPT, MPT, DPT) and short hydrocarbon chain (4 carbon atoms) (RPT) are different from those found for pterin derivatives containing a p-aminobenzoic acid (PABA) moiety in the substituent (MFA and PA). Fluorescence quantum yields (Phi(F)) of the first group of compounds are relatively high (>/=0.4), whereas MFA and PA exhibit very small Phi(F) values (相似文献   

Aza-analogues of extended tetrathiafulvalenes

The phosphoramidate-like reaction of 1,3-dithiole derived N-(diethoxyphosphinyl)hydrazones with formyl derivatives of 1,3-dithiole affords the longest aza-analogues of extended tetrathiafulvalenes with a polyenic spacer reported to date. Their structural and electrochemical properties are discussed.