Comparative studies of MCs+-SIMS and e–-beam SNMS for quantitative analysis of bulk materials and layered structures

For the quantification of heterostructure depth profiles the knowledge of relative sensitivity factors (RSF) and the influence of matrix effects on the measured profiles is necessary. Matrix dependencies of the measured ion intensities have been investigated for sputtered neutral mass spectrometry (SNMS) and MCs(+)-SIMS. The use of Cs as primary ions for SNMS is advantageous compared to Ar because the depth resolution is improved without changing RSFs determined under Ar bombardment. No significant amount of molecules has been found in the SNMS spectra under Cs bombardment. Using MCs(+)-SIMS the RSFs are matrix dependent. An improvement of depth resolution can be achieved by biasing the sample against the primary ion beam for SNMS due to a reduction of the net energy of the primary ions and a resulting more gracing impact angle.     

TEM and SNMS studies of protective alumina scales on NiCrAlY-alloys

The effect of Si addition on the oxidation behaviour of NiCrAlY alloys in the temperature range 950 bis 1100 degrees C has been investigated. During isothermal oxidation oxide growth rates were practically independent of the Si-content. However during cyclic oxidation Si additions were beneficial. Si additions of 1-2(m)/(0) appeared to shift the onset for spallation to longer times. It was found that Si stabilizes the beta-phase and probably it suppresses the formation of metastable Al(2)O(3) modifications.     

The synthesis of shihunine and related compounds from ortho-carboxyphenyl cyclopropyl ketone

Reaction of dicyclopropyl cadmium and phthalic acid monochloride monomethyl ester gives o-carboxyphenyl cyclopropyl ketone (2). Reaction of the methyl ester of 2 with methylamine gives 2 - methyl - 3 - hydroxy-3-cyclopropyl-1-isoindolinone (4b), which is converted by hydrogen halides in chloroform to the rearranged homoallylic halides 5a–c. Thionyl chloride in chloroform converts 2 to 3-(3-chloropropylidene) phthalide (7) which upon reaction with methylamine gives isoshihunine (8). Heating of keto acid 2 with aniline leads to N-phenyl-N-norshihunine (9), while upon heating of 2 with methylamine spiro [(1 - methylpyrrolidine) - 2 - 3′ - (2′ - methyl - 1′ - isoindolinone)] (10) is obtained. 10 is converted to shihunine (1) by 48% HBr solution. The mechanisms of the reactions are discussed.     

Correction to scaling for directed branched polymers (lattice animals)

Correction to scaling effects for the directed branched polymer (lattice animal) problem are calculated both from the field theoretic model due to Day and Lubensky (dynamics at the Yang-Lee edge singularity) and enumeration data. The universal correction to scaling exponent for the number of distinct animal configurations is estimated by numerical methods and field theoretic renormalization group results (=7–d expansion) extrapolated to exact results ford=2 andd=3; estimates of nonuniversal amplitudes are included.     

Trace and surface analysis of ceramic layers of solid oxide fuel cells by mass spectrometry

For the trace analysis of impurities in thick ceramic layers of a solid oxide fuel cell (SOFC) sensitive solid-state mass spectrometric methods, such as laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) and radiofrequency glow discharge mass spectrometry (rf-GDMS) have been developed and used. In order to quantify the analytical results of LA-ICP-MS, the relative sensitivity coefficients of elements in a La(0.6)Sr(0.35)MnO(3) matrix have been determined using synthetic standards. Secondary ion mass spectrometry (SIMS) - as a surface analytical method - has been used to characterize the element distribution and diffusion profiles of matrix elements on the interface of a perovskite/Y-stabilized ZrO(2) layer. The application of different mass spectrometric methods for process control in the preparation of ceramic layers for the SOFC is described.     

Zur gas-chromatographisch-massenspektrometrischen Bestimmung von Steroidhormonen in Körperflüssigkeiten unter Verwendung eines Multiple Ion Detectors (Fragmentographie)

The quantitative determination of small amounts of steroids in body fluids by physical-chemical methods (gas chromatography, double isotope derivative dilution) requires a considerable amount of time and effort. The use of the combination gas chromatography-mass spectrometry provides a simple method which is highly specific and sensitive. The mass spectrometer can be used as a specific detector for gas chromatography; this is achieved by adjusting to a suitablem/e value. By means of the multiple ion detector, it is possible to record several masses simultaneously. The applicability of this method is demonstrated by the determination of the following steroid hormones: testosterone in plasma, aldosterone in urine, oestradiol-17β and oestrone in plasma. For the determination of oestrogens, the use of the corresponding dideutero compounds as standards offers a special advantage. Preliminary experiments showed that the lower limits of detection are 1 ng for aldosterone and testosterone, and 0.05 ng for oestradiol-17β and oestrone.     

Quantitative determination of element distributions in silicon based thin film solar cells using SNMS

The determination of elemental distributions in thin film solar cells based on amorphous silicon using electron beam SNMS is possible by quantifying the measured ion intensities. The relative sensitivity factors (RSFs) for all elements measured have to be known. The RSFs have been determined experimentally using implantation and bulk standards with known concentrations of the interesting elements. The measured RSFs have been compared with calculated RSFs. The model used for the calculation of the RSFs takes into account the probability for electron impact ionization and the dwell time of the neutrals inside the postionization region. The comparison between measured and calculated RSF shows, that this model is capable to explain the RSFs for most elements. Differences between calculated and measured values can be explained by the formation of hydride and fluoride molecules (in case of H and F) and influences of the angular distribution of the sputtered neutrals in case of Al. The experimentally determined RSFs have been used for a quantification of depth profiles of the i-, buffer-, p- and front contact layers of a-Si solar cells.