Enhanced ethanol sensing properties of WO3 modified TiO2 nanorods

Pristine and WO₃ decorated TiO₂ nanorods (NRs) were synthesised to investigate n-n-type heterojunction gas sensing properties. TiO₂ NRs were fabricated via hydrothermal method on fluorine-doped tin oxide coated glass (FTO) substrates. Then, tungsten was sputtered on the TiO₂ NRs and thermally oxidised to obtain WO₃ nanoparticles. The heterostructure was characterised by X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive X-ray (EDX) spectroscopy. Fabricated sensor devices were exposed to VOCs such as toluene, xylene, acetone and ethanol, and humidity at different operation temperatures. Experimental results demonstrated that the heterostructure has better sensor response toward ethanol at 200 °C. Enhanced sensing properties are attributed to the heterojunction formation by decorating TiO₂ NRs with WO₃.     

Polyaromatic Profluorescent Nitroxide Probes with Enhanced Photostability

Novel profluorescent mono‐ and bis‐isoindoline nitroxides linked to napthalimide and perylene diimide structural cores are described. These nitroxide‐fluorophore probes display strongly suppressed fluorescence in comparison to their corresponding non‐radical diamagnetic methoxyamine derivatives. The perylene‐based probe possessing two isoindoline systems tethered through ethynyl linkages was shown to be the most photostable in solution, demonstrating significantly enhanced longevity over the 9,10‐bis(phenylethynyl)anthracene fluorophore used in previous profluorescent nitroxide probes.     

In search of a new class of stable nitroxide: synthesis and reactivity of a peri-substituted N,N-bissulfonylhydroxylamine

Acyclic bissulfonylnitroxides have never been isolated, and degrade through fragmentation. In an approach to stabilising a bissulfonylnitroxide radical, the cyclic, peri-substituted N,N-bissulfonylhydroxylamine, 2-hydroxynaphtho[1,8-de][1,3,2]dithiazine 1,1,3,3-tetraoxide (1), has been prepared by formal nitrogen insertion into the sulfur-sulfur bond of a sulfinylsulfone, naphtho[1,8-cd][1,2]dithiole 1,1,2-trioxide. The heterocyclic ring of 1 is shown to adopt a sofa conformation by X-ray crystallography, with a pseudo-axial hydroxyl group. N,N-Bissulfonylhydroxylamine 1 displays high thermal, photochemical and hydrolytic stability compared to acyclic systems. EPR analysis reveals formation of the corresponding bissulfonylnitroxide 2 upon oxidation of 1 with the Ce(IV) salts CAN and CTAN. Although 2 does not undergo fragmentation, it cannot be isolated, since hydrogen atom abstraction to reform 1 occurs in situ. The stability and reactivity of 1 and 2 are compared with the known cyclic benzo-fused N,N-bissulfonylhydroxylamine, N-hydroxy-O-benzenedisulfonimide (6), for which the X-ray data, and EPR of the corresponding nitroxide 10, are also reported for the first time.     

Phenolic compounds,essential oil composition,and antioxidant activity of Angelica purpurascens (Avé-Lall.) Gill

In this study, methanol extracts (MEs) and essential oil (EO) of Angelica purpurascens (Avé-Lall.) Gill obtained from different parts (root, stem, leaf, and seed) were evaluated in terms of antioxidant activity, total phenolics, compositions of phenolic compound, and essential oil with the methods of 2,2-azino-bis(3ethylbenzo-thiazoline-6-sulfonic acid (ABTS•⁺), 2,2-diphenyl-1-picrylhydrazil (DPPH•) radical scavenging activities, and ferric reducing/antioxidant power (FRAP), the Folin–Ciocalteu, liquid chromatography−tandem mass spectrometry (LC−MS/MS), and gas chromatography-mass spectrometry (GC−MS), respectively. The root extract of A. purpurascens exhibited the highest ABTS•⁺, DPPH•, and FRAP activities (IC₅₀: 0.05 ± 0.0001 mg/mL, IC₅₀: 0.06 ± 0.002 mg/mL, 821.04 ± 15.96 µM TEAC (Trolox equivalent antioxidant capacity), respectively). Moreover, EO of A. purpurascens root displayed DPPH• scavenging activity (IC₅₀: 2.95 ± 0.084 mg/mL). The root extract had the highest total phenolic content (438.75 ± 16.39 GAE (gallic acid equivalent), µg/mL)). Twenty compounds were identified by LC−MS/MS. The most abundant phenolics were ferulic acid (244.39 ± 15.64 μg/g extract), benzoic acid (138.18 ± 8.84 μg/g extract), oleuropein (78.04 ± 4.99 μg/g extract), and rutin (31.21 ± 2.00 μg/g extract) in seed, stem, root, and leaf extracts, respectively. According to the GC−MS analysis, the major components were determined as α-bisabolol (22.93%), cubebol (14.39%), α-pinene (11.63%), and α-limonene (9.41%) among 29 compounds. Consequently, the MEs and EO of A. purpurascens can be used as a natural antioxidant source.     

Two-photon fluorescence microscopy imaging of cellular oxidative stress using profluorescent nitroxides

A range of varying chromophore nitroxide free radicals and their nonradical methoxyamine analogues were synthesized and their linear photophysical properties examined. The presence of the proximate free radical masks the chromophore's usual fluorescence emission, and these species are described as profluorescent. Two nitroxides incorporating anthracene and fluorescein chromophores (compounds 7 and 19, respectively) exhibited two-photon absorption (2PA) cross sections of approximately 400 G.M. when excited at wavelengths greater than 800 nm. Both of these profluorescent nitroxides demonstrated low cytotoxicity toward Chinese hamster ovary (CHO) cells. Imaging colocalization experiments with the commercially available CellROX Deep Red oxidative stress monitor demonstrated good cellular uptake of the nitroxide probes. Sensitivity of the nitroxide probes to H(2)O(2)-induced damage was also demonstrated by both one- and two-photon fluorescence microscopy. These profluorescent nitroxide probes are potentially powerful tools for imaging oxidative stress in biological systems, and they essentially "light up" in the presence of certain species generated from oxidative stress. The high ratio of the fluorescence quantum yield between the profluorescent nitroxide species and their nonradical adducts provides the sensitivity required for measuring a range of cellular redox environments. Furthermore, their reasonable 2PA cross sections provide for the option of using two-photon fluorescence microscopy, which circumvents commonly encountered disadvantages associated with one-photon imaging such as photobleaching and poor tissue penetration.     

Profluorescent nitroxides: Thermo-oxidation sensors for stabilised polypropylene

The profluorescent nitroxide, 1,1,3,3-tetramethyldibenzo[e,g]isoindolin-2-yloxyl (TMDBIO) was investigated as a probe for the radical-mediated degradation of stabilised polypropylene. TMDBIO has been previously shown to be a sensitive probe for free-radical degradation during the thermo-oxidation of unstabilised polypropylene. Here we report on the effect that adding hindered phenol or phosphite stabilisers to polypropylene has on the free-radical sensing ability of TMDBIO during thermo-oxidation. In addition, novel dual-functional, hindered phenol containing profluorescent nitroxides, 5-[2-(4-hydroxy-3,5-di-tert-butylphenyl)ethenyl]-1,1,3,3-tetramethylisoindolin-2-yloxyl (HSTMIO) and its derivatives were investigated as probes for the radical-mediated degradation of polypropylene. These dual-functional probes were shown to be efficient stabilisers for polypropylene during thermo-oxidation at 150 °C in oxygen and sensors of thermo-oxidation during its early stages, in the so-called “induction period”.     

Sensitive luminescence techniques to study the early stages of polymer oxidation

This paper describes recent developments in the use of chemiluminescence (CL) and profluorescent nitroxides (PFNs) in probing the “induction period” of polymer oxidation. CL measures the instantaneous rate of reaction of hydroperoxides responsible for initiating degradation and the spreading of oxidation, while PFNs can be used to measure the concentration of alkyl radicals produced in oxidation events and thus provide an integrating sensor for the extent of cumulative damage. The PFN additive acts as an oxidation retarder by competing with oxygen to scavenge the alkyl radicals that generate chain carrying peroxy radicals and so mirrors the performance of hindered amine stabilisers (HAS) in one part of their stabilisation cycle. Using the example of polypropylene (PP) and cis-polyisoprene (PIP) as substrates which can rapidly spread oxidative damage, the factors controlling the reaction of PFNs can be determined from CL and fluorescence as well as infra-red (IR) spectroscopy through the detection of oxidation products as measured by the carbonyl index. Matrix effects on the reactivity are demonstrated using a polyethylene-norbornene copolymer (TOPAS) as carrier for both PIP and the PFN and it is seen that the PFN is a radical scavenger only above T_g of the carrier. When PIP alone is oxidized, the PFN is an integrating sensor for free radical production under ambient conditions for up to twelve months while also stabilizing the polymer. Critically, it is thus able to determine the underlying rate of radical production in the oxidation induction period.     

Predicting the false alarm rate in multi-institution mortality monitoring

Statistical process control is increasingly used by single hospitals or centres to monitor their performance, but national monitoring across multiple centres, measures and groups incurs higher false alarm rates unless the method is modified. We consider setting the threshold for cumulative sum charts to produce the desired false alarm rate, taking into account the centre volume and expected outcome rate. We used simulation to estimate the false alarm and successful detection rates for a variety of chart thresholds. We thereby calculated the ‘cost’ of a higher threshold compared with one set to give a false alarm rate of 5% for three clinical groups of common interest. The false alarm rate often showed non-linear relations with the threshold, volume and expected mortality rate but an equation was found with good approximation to the simulated values. The relation between these factors and the ‘cost’ of a higher threshold was not straightforward. The ‘cost’ (difference in number of deaths) incurred by raising the chart threshold provides an intuitive measure and is applicable to other settings.