Preparation and properties of isobutylene–isoprene rubber–clay nanocomposites

Isobutylene isoprene rubber (IIR)‐clay nanocomposites have been prepared successfully by melt intercalation with maleic anhydride‐grafted IIR (Ma‐g‐IIR) and organophilic clay. In IIR‐clay nanocomposites, the silicate layers of the clay were exfoliated and dispersed into the monolayer. The nanocomposites exhibited greater gas barrier properties compared with those of Ma‐g‐IIR. When 15 phr clay was added, gas barrier properties were 2.5 times greater than those of Ma‐g‐IIR. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1182–1188, 2006     

Encapsulation of ZnS:Mn2+ nanocrystals with diblock copolymers

The encapsulation of the nanocrystalline manganese‐doped zinc sulfide (ZnS:Mn) in poly(styrene‐b‐2vinylpyridine) (PS‐PVP) diblock copolymers is reported. Below the critical micelle concentration in the absence of nanocrystals (NCs), inverse micelles of PS‐PVP were induced by adding ZnS:Mn NCs, the presence of which was confirmed by scanning force microscope and dynamic light scattering. In toluene, a PS‐selective solvent, the less‐soluble PVP blocks preferentially surround the ligand‐coated ZnS:Mn NCs. For PS‐PVP encapsulated ZnS:Mn NCs, the ratio of blue emission to orange emission of ZnS:Mn NCs is dependent on both the concentration of PS‐PVP and the solvent quality. The pyridine of PVP blocks form complexes with the Zn atoms via the nitrogen lone pair and thus the sulfur vacancies are passivated. As a result, the defect‐related blue emission is selectively quenched even when the micelles are not formed. As the concentration of PS‐PVP encapsulating the ZnS:Mn NCs increases, the intensity of blue emission decreases. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3227–3233, 2006     

Calorimetric studies of glycolysis of E. coli under nongrowing condition

Initial reactions of the metabolic processes in bacterial cells have been investigated by measuring heat generation of $\text{E. coli}$ under nongrowing conditions with a titrimetric calorimeter. Three exothermic reactions with different rates of heat generation have been observed calorimetrically under aerobic condition when glucose solution was added to the cell suspension of nongrowing medium. It was estimated that the first exothermic peak obtained after adding glucose was due to uptaking of substrate molecules and following two peaks reflected to the reaction of phosphofructokinase and that of glyceraldehyde-3-phosphate dehydrogenase respectively. To clarify the process of glycolysis, measurements of heat evolution due to metabolisms of various sugars except glucose have also examined and compared with that of glucose.     

Conformation of drawn poly(trimethylene terephthalate) studied by solid-state 13C NMR

The change in the conformation of the flexible O-CH2-CH2-CH2-O segment of poly(trimethylene terephthalate) (PTT) monofilament caused by drawing was investigated by means of the gamma-gauche effect on the 13C solid-state NMR chemical shift of the internal methylene carbon, combined with the NMR relaxations. The conformation around the O-CH2 and CH2-O bonds for as-spun fiber was trans/trans. On drawing, followed by heat treatment, the conformation changed to gauche/gauche. The ratio of gauche/gauche to trans/trans for the drawn PTT fiber was determined quantitatively.     

Highly photoluminescent multilayer QD-glass films prepared by LbL self-assembly

A novel and facile preparation method for layer-by-layer (LbL) self-assembled films incorporating quantum dots (QDs) and having intense photoluminescence (PL) from blue to red is presented. Functional sol-gel-derived glass layers prepared by the hydrolysis of 3-aminopropyltrimethoxysilane (APS) or 3-mercaptopropyltrimethoxysilane (MPS) have been used as a linkage between QD layers. Absorption, PL spectroscopy, transmission electron microscopy, and atomic force microscopy were employed for characterization, which revealed that the QDs in the prepared films had a nearly close-packed coverage and were not aggregated. The PL efficiencies of the QDs (CdTe or ZnSe, both are thioglycolic acid-stabilized) dispersed in the films were roughly half that of the initial colloidal solutions but reached 24% before a refractive index correction. The thickness of the red-emitting film with 10 CdTe QD layers was approximately 50 nm. The concentration of QDs in the film derived from the first absorption peak was approximately 0.01 M. Because the PL starts to show a red shift, the obtained concentration is practically the ultimate one in the glass matrix. The mercapto, amino, and carboxyl groups play important roles in LbL self-assembling processes.     

Asymmetric synthesis of alpha-amino acids: indium-mediated reactions of glyoxylic oxime ether in aqueous media

The indium-mediated allylation and alkylation reactions of the Oppolzer camphorsultam derivative of glyoxylic oxime ether proceeded with excellent diastereoselectivity in aqueous media, providing a variety of enantiomerically pure alpha-amino acids.     

Stereoselective synthesis of (Z)-fluoroalkenes directed to peptide isosteres: copper mediated reaction of trialkylaluminum with 4,4-difluoro-5-hydroxyallylic alcohol derivatives

Copper mediated alkyl-transfer reaction of trialkylaluminum (R₃Al) with (E)-4,4-difluoro-5-hydroxyallylic alcohol derivative smoothly proceeded to give the corresponding 2-alkylated 4-fluoro-5-hydroxyhomoallylic alcohol derivative with completely Z and 2,5-syn selective manner. Regio- and stereoselective conversion of the C5-hydroxyl group of the fluoroolefin thus obtained to amino group could be achieved through one-pot mesylation and azidation reaction.     

Influences of fatty acid moiety and esterification of polyglycerol fatty acid esters on the crystallization of palm mid fraction in oil-in-water emulsion

We examined the crystallization of palm mid fraction (PMF) in oil-in-water (O/W) emulsion, after adding polyglycerol fatty acid esters (PGFEs). We employed ultrasonic velocity measurements and DSC techniques, with special emphases on the influences of fatty acid moiety and esterification of PGFE. Twelve types of PGFEs were examined as additives. PGFEs have a large hydrophilic moiety composed of 10 glycerol molecules to which palmitic, stearic and behenic acids were esterified as the fatty acid moiety with different degrees of esterification. Crystallization temperature (T(c)) of PMF remarkably increased with increasing concentrations of the PGFEs as the chain length of the fatty acid moiety increased, and the PGFE became more hydrophobic in accordance with increasing degree of esterification. We observed that the heterogeneous nucleation of PMF in the O/W emulsion was activated at the oil-water interface, where the template effect of very hydrophobic long saturated fatty acid chains of the PGFE might play the main role of heterogeneous nucleation.     

Copper-catalyzed addition reaction of γ,γ-dialkoxyallylic zirconium species with imines

In the presence of CuCN, reaction of γ,γ-dialkoxyallylic zirconium species 1 with imines proceeded at the γ-position of 1 to give gem-dialkoxyhomoallylic amines 3 in high yield. In this reaction, γ,γ-dialkoxyallylic zirconium species 1 acts as an α,β-unsaturated acyl anion equivalent.