New functionalized polyesters to achieve controlled architectures

Following our continued interest in the production of bioerodible and biodegradable functional polymers for biomedical applications, we synthesized and characterized new unsaturated polyesters. The presence of functional groups in the polymer backbone provided sites for chemical modification, and through a variation in the structure, the physical properties, such as the hydrophilicity and solubility, could be affected. With 1,1-di-n-butyl-stanna-2,7-dioxacyclo-4-heptene as the initiator in the ring-opening polymerization of polyesters, a new set of functionalized polyesters was created. The polymerization of ϵ-caprolactone resulted in poly(ϵ-caprolactone) with a double bond incorporated into the structure. The polymers were obtained in a controlled manner with low molecular dispersities. The double bond was previously incorporated into L -lactide polymers, and the two reactions were compared in this study. The conversion of ϵ-caprolactone, with a degree of polymerization of 50, was completed within 140 min, whereas for L -lactide, only a 45% conversion took place in the same period of time. The dispersities were somewhat higher with ϵ-caprolactone because of the higher reaction rate and, therefore, lower selectivity. The incorporated CC double bond in the polyesters provided a variety of opportunities for further modifications. In this case, the double bond of the L -lactide macromonomers was oxidized into epoxides. Epoxidation was carried out with m-chloroperoxybenzoic acid as a chemical reagent. The conversion of the double bonds into epoxides was completed, and the obtained yields were good (>95%). As a result of the mild reaction conditions, the epoxidation of the double bond was carried out quantitatively without any side reactions. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 444–452, 2004     

Solid-phase microextraction for qualitative and quantitative determination of migrated degradation products of antioxidants in an organic aqueous solution

Low molecular weight aromatic substances may migrate out from plastic packaging to their contents, especially if they consist of organic aqueous solutions or oils. It is, therefore, extremely important to be able to identify and quantify any migrated substances in such solutions, even at very low concentrations. We have in this work investigated and evaluated the use of solid-phase microextraction for the specific task of extraction from an organic aqueous solution such as a simulated pharmaceutical solution consisting of 10 vol.% ethanol in water. The goal was furthermore to investigate the possibility of simultaneously identifying and quantifying the substances in spite of differences in their chemical structures. Methods were developed and evaluated for extraction both with direct sampling and with headspace sampling. Difficulties appeared due to the ethanol in the solution and the minute amounts of substances present. We have shown that a simultaneous quantification of migrated low molecular weight degradation products of antioxidants using only one fibre is possible if the extraction method and temperature are adjusted in relation to the concentration levels of the analytes. Comparions were made with solid-phase extraction.     

HPTLC analysis of organotin compounds in preservative solutions and preservative-treated wood

A high-performance thin-layer chromatographic (HPTLC) method is described for the determination of tributyltin compounds (bis(tri-n-butyltin) oxide, TBTO, and tri-n-butyltin naphthenate, TBTN) and their degradation products (dibutyltin and monobutyltin compounds). The organotin compounds are extracted from wood with ethanol containing 0.5% (v/v) of hydrochloric acid and the separation of the defferent kinds of organotin compounds is achieved by thin-layer chromatography. The sample spots are measured using a scanning densitometer after decomposing the organotin compounds to inorganic tin by ultraviolet irradiation and visualization of the spots with pyrocatechol violet. Applications of the method to detection and quantification of organotin compounds in preservative solutions, in recently impregnated wood, and in wood samples from five-year-old window frames are described.     

Solid-phase extraction and gas chromatographic-mass spectrometric identification of degradation products from enhanced environmentally degradable polyethylene

A solid-phase extraction (SPE) method using unbonded silica (Si) and silica bonded with octadecyl (C₁₈) or aminopropyl (NH₂) groups was developed to separate into five fractions the highly complex mixture of low-molecular-mass degradation products formed from degradable polymers. Application of the method to polyethylene modified with starch and/or a pro-oxidant system, degraded for 30 weeks in water at 95°C, enabled the identification by GC-MS of over three times as many products as when the sample was prepared by liquid-liquid extraction. Over 60 degradation products were identified in each sample; mainly dicarboxylic acids, monocarboxylic acids and n-alkanes. In addition, several lactones, aldehydes and alcohols were detected.     

Degradable Polymers. IV. Degradation of Aliphatic Thermoplastic Block Copolyesters

Three block copolymers of poly(ethylene succinate) and poly(tetramethylene glycol) with about 20, 54, and 59 mol% polyether have been prepared and subjected to hydrolytic degradation at 37°C. The sample containing 59 mol% showed drastic changes in the properties after 3 months of degradation, whereas the other samples exhibited only minor changes. The tensile strength was completely lost, the molecular weight had decreased to 7% of the original value, and the crystallinity (measured as heat of fusion) had more than doubled. IR and ¹H-NMR analyses showed that the rates of release of the different polymeric blocks varied throughout the period of hydrolytic degradation. Fibers of the block copolymer poly(ethylene succinate)/poly(tetramethylene glycol) with poly(tetramethylene glycol) fractions ranging from 20 to 50 mol% have been analyzed by ¹³ C NMR to determine the molecular weights of the PES blocks and by reflection IR, ESCA, and SEM to investigate the surface composition. The molecular weights of the polyester blocks were inversely proportional to the mol% of polyether, and the values were in agreement with theoretical calculated values. The surface concentration of the polyether was found to be higher than that in the bulk and also independent of the mol% polyether in the range of study. A degradation mechanism is proposed which involves a combined effect of surface erosion and hydrolytic attack on the ester linkages connecting the amorphous polyether and the crystalline polyester blocks.     

Long-time-storage mechanism for Tm:YAG in a magnetic field

We obtained a long-time-storage mechanism for spectral features in thulium ions doped into YAG by applying a magnetic field that splits the electronic ground state. We show experimentally that the storage time can be more than 30 s, which is 3 orders of magnitude longer than that of the metastable state that normally is used for information storage in this material. Level splitting and storage lifetimes for various magnetic field strengths of as much as 5 T were investigated. This storage mechanism will be relevant in the many coherent transient-based signal-processing schemes in which Tm:YAG is being used, and we demonstrate long-time storage in a basic data storage application.     

Nitrogen isotope analysis of ammonium in aqueous solutions using a perfluorosulfonated ionomer membrane for solid-phase microextraction

The use of custom-made solid-phase microextraction (SPME) fibers coated with a perfluorosulfonated ionomer, Nafion, was investigated for nitrogen isotopic analysis of ammonium in aqueous solutions. Aqueous ammonium was converted to ammonia by addition of a base, followed by absorption from the headspace, desorption in the injection port of a gas chromatograph, and analysis by gas chromatography/combustion/isotope ratio mass spectrometry (GC/C/IRMS). Fibers coated with a Nafion tubing were chosen due to a higher fiber-gas distribution constant and a higher Nafion thickness than fibers coated with Nafion solution, both leading to a higher amount of ammonia absorbed at equilibrium. The Nafion membrane-coated fiber absorbed approximately 20 times more than a commercial polydimethylsiloxane (PDMS) fiber. The isotopic fractionation between fiber and gas was 1.0117 +/- 0.0009 (standard deviation, SD, of all measurements) at an initial ammonia gas concentration of 21-210 microM. At 390 microM initial gas concentration it was slightly lower. When sampling from liquid samples, an ammonium concentration of 10 mM was needed to obtain a sufficient amount of ammonia absorbed. Modeling of the absorption at different temperatures showed that the absorption was approximately constant in the temperature range suitable for SPME experiments. Absorption at room temperature was therefore used for simplicity. A pilot study was conducted in which absorption was achieved from a single 9 microL droplet of sample. The preliminary results showed that delta(15)N analysis was possible for only 0.4-0.5 micromol of ammonium with a SD of 0.8 per thousand (n = 5).     

Non-standard Hamiltonian effects on neutrino oscillations

We investigate non-standard Hamiltonian effects on neutrino oscillations, which are effective additional contributions to the vacuum or matter Hamiltonian. Since these effects can enter in either the flavor or mass basis, we develop an understanding of the difference between these bases representing the underlying theoretical model. In particular, the simplest of these effects are classified as “pure” flavor or mass effects, where the appearance of such a “pure” effect can be quite plausible as a leading non-standard contribution from theoretical models. Compared to earlier studies investigating particular effects, we aim for a top–down classification of a possible “new physics” signature at future long-baseline neutrino oscillation precision experiments. We develop a general framework for such effects with two neutrino flavors and discuss the extension to three neutrino flavors, and we demonstrate the challenges for a neutrino factory to distinguish the theoretical origin of these effects with a numerical example as well. We find how the precision measurements of neutrino oscillation parameters can be altered by non-standard effects alone (not including non-standard interactions in the creation and detection processes) and that the non-standard effects on Hamiltonian level can be distinguished from other non-standard effects (such as neutrino decoherence and decay) if we consider the specific imprint of the effects on the energy spectra of several different oscillation channels at a neutrino factory.     

Threshold effects on renormalization group running of neutrino parameters in the low-scale seesaw model

We show that, in the low-scale type-I seesaw model, renormalization group running of neutrino parameters may lead to significant modifications of the leptonic mixing angles in view of so-called seesaw threshold effects. Especially, we derive analytical formulas for radiative corrections to neutrino parameters in crossing the different seesaw thresholds, and show that there may exist enhancement factors efficiently boosting the renormalization group running of the leptonic mixing angles. We find that, as a result of the seesaw threshold corrections to the leptonic mixing angles, various flavor symmetric mixing patterns (e.g., bi-maximal and tri-bimaximal mixing patterns) can be easily accommodated at relatively low energy scales, which is well within the reach of running and forthcoming experiments (e.g., the LHC).