Mono-Aryl/Alkylthio-Substituted (Hetero)acenes of Exceptional Thermal and Photochemical Stability by the Thio-Friedel–Crafts/Bradsher Cyclization Reaction

The highly substituted mono-aryl/alkylthio-(hetero)acenes prepared in this study have been found to be thermally more stable (T_decomp.=331–354 °C) than the known di-aryl/alkylthio-substituted acenes by an average of 25 °C. They are also much more photostable at 254 and 365 nm (in both argon and air) than the parent anthracene and other reported anthracenes. The most photostable aryl/alkylthio-anthracenes at 254 nm were found to be 60–70 (in air) and 130 (in argon) times more stable in solution than the unsubstituted anthracene, and much more stable than known EDG/EWG-substituted anthracenes (EDG=electron-donating group, EWG=electron-withdrawing group) with an extended aromatic core. Furthermore, the acenes showed significantly higher photostability at 365 nm in both air and argon. The anthracenes were obtained by the novel thio-Friedel–Crafts/Bradsher cyclization reaction of hitherto unknown [o-(1,3-dithian-2-yl)aryl](aryl)methyl thioethers. The developed approach provides a general access to mono-aryl/alkylthio-substituted (hetero)acene frameworks containing at least three fused (hetero)aromatic rings. The characteristic feature of this approach, which leads to highly substituted acenes, is that the substituents, unlike in other methods, may be introduced at an early stage of the synthesis. DFT and TD-DFT calculations confirmed the stabilizing role of the aryl/alkylthio substituent in the mono-aryl/alkylthio-substituted anthracenes, which are the most stable anthracenes prepared to date. Their high photostability is mainly due to the quenching of singlet oxygen by the acene and the quenching of the acene S₁ state by molecular oxygen.     

Tracing Possible Structural Asymmetry of Silica Gel Used for Precoating Thin-Layer Chromatography Plates

JPC – Journal of Planar Chromatography – Modern TLC - We have previously described unexpected two-dimensionality in the thin-layer chromatographic separation of pairs of enantiomers of...     

The mass spectra of 2- and 4-monohydroxy- and 2, 4-dihydroxy-1, X-naphthyridines

The mass spectra of 2-and 4-monohydroxy-and 2, 4-dihydroxy-1, 5-, -1, 6-, -1, 7-and 1, 8-naphthyridines are reported. Fragmentation mechanisms are proposed and discussed.     

Structure and photochemistry of 18-diazo-1,4,7,10,13,16-hexaoxacyclononadeca-17,19-dione and its sodium and potassium complexes. Control of the ground-state conformation of 2-diazo-1,3-dicarbonyl fragment via host-guest complexation

[reaction: see text] The macrocyclic 18-diazo-1,4,7,10,13,16-hexaoxacyclononadeca-17,19-dione (3-diazo-2,4-dioxo-19-crown-6, 1) readily forms complexes with potassium (2, stability constant in methanol is K(K+) = 229 +/- 25 M(-1)) and sodium ions (3, K(Na+) = 84.2 +/- 7.9 M(-1) in methanol). According to B3LYP/6-31G+(d,p) calculations and temperature-dependent 1H NMR spectroscopy, the predominant conformation of 1 has a Z,Z arrangement of the diazo and carbonyl groups. The X-ray crystal structure analysis showed that the potassium complex (2) has the same Z,Z arrangement, while the sodium analogue (2) exists in conformation with Z,E geometry of the diazodicarbonyl moiety. Direct 254 nm photolysis of diazo compounds 1-3 in methanol results in the formation of 3-methoxy-2,4-dioxo-19-crown-6 (5), the product of the insertion of corresponding alpha,alpha'-dicarbonylcarbene into the O-H bond of the solvent. The triplet-sensitized photolysis of diazomalonates 1-3 produces 2,4-dioxo-19-crown-6 (6), which is apparently formed via the triplet state of the intervening carbene.     

Mathematical models of solute retention in gas chromatography as sources of thermodynamic data. Part III. Alkylbenzenes as the test analytes

Direct determination of thermodynamic data has always been a complicated and troublesome experimental task. Gas chromatography is among long-established working tools well suited to performing this particular task indirectly. Our own results were first presented in the papers by Ciazynska-Halarewicz and Kowalska (1,2), and this article is Part III in the series. Present experiments are carried out on low- and medium-polarity stationary phases at five different temperatures ranging from 323K to 423K. They enable determination of two thermodynamic properties of the alkylbenzenes, molar enthalpy of vaporization (DeltaH(vap)), and the chemical potential of partitioning of the methylene group between the two phases of the chromatographic system (Delta micro (p(-CH2-))). These properties are obtained from eight nonempirical models and, as is apparent from their derivation (3-7), the terms of the models have clearly defined physical meaning, which enables calculation of thermodynamic properties.     

Determination of “solvent” concentration in “chromatographic solutions” on the cellulose sorbents

An attempt was undertaken to furnish an entirely quantitative characteristics to the thermodynamic model of the chromatographic system presented in (2). The attempt proved to be successful and one managed to establish simultaneously a new method enabling direct determination of the hydrogen-bond enthalpy from the PC experimental results.     

Synthesis of gold nanorod/single-wall carbon nanotube heterojunctions directly on surfaces

This contribution describes the synthesis of gold nanorod (Au NR)/single-wall carbon nanotube (SWCNT) heterojunctions assembled directly on Si/SiOx substrates. SWCNTs are attached to amine-functionalized Si/SiOx substrates, and Au monolayer-protected clusters (MPCs) are adsorbed to the surface of SWCNTs through hydrophobic interactions. Seed-mediated reduction of HAuCl4 with ascorbic acid in the presence of cetyltrimethylammonium bromide (CTAB) onto the Au MPCs leads to the growth of larger Au nanostructures directly on the SWCNTs. Au NRs account for 19% of the nanostructures, some of which are attached directly to the sidewall and some at the ends of the SWCNTs. Raman spectroscopic measurements of SWCNTs before and after growth of the Au nanostructures reveal that the presence of Au leads to an approximately 50-fold enhancement of the Raman scattering signal. Combining 1D nanostructures of different materials (Au and carbon in this example) is of fundamental interest and may find use in nanoelectronics, chemical sensing, electrochemical, and spectroscopy applications.     

Bestimmung der Aktivitätskoeffizienten im chromatographischen Modell „binärer Lösungen“

An explanation is given for the two possible ways of determination of the activity coefficients of solutes, when applying a new thermodynamic model of adsorption and partition chromatography, i. e. the binary solutions model.

     

A refined physico-chemical model of solute retention in reversed-phase high-performance liquid chromatography with ternary mobile phases

Summary In our previous publication we have introduced a new model of solute retention in RP-HPLC systems with ternary mobile phases of the B+AB₁+AB₂ type (B: acetonitrile or tetrahydrofuran; AB₁: methanol; AB₂: water). That model proposed no stoichiometric differentiation between acetonitrile and tetrahydrofuran, alternatively present in the solvent system; moreover, it made some very rough assumptions only as to the intermolecular interactions among the mobile phase constituents.This paper introduces a significant refinement to the already established retention model, which is based on the simple quantitative relationships between acetonitrile and tetrahydrofuran, and the remaining components of the ternary liquid system. The refined model is tested with same experimental data.     

Spectrophotometric determination of Fe(II) in milligram solid samples

The analytical procedure of determination of Fe(II) in the presence of Fe(III) in milligram samples is proposed. A solid sample is dissolved in hydrochloric acid in argon atmosphere. Subsequently, the pH-value of the solution is fixed and Fe(III) complexed by phosphoric buffer. At the next step Fe(II) is oxidized by -molybdosilicic acid. Finally, the intensity of colouring caused by the reduced form of the acid is measured at the wavelength 770 nm. The proper treatment of the sample during oxidation, and immediately before, is decisive for the accuracy of the analysis. The method was verified by means of the analysis of synthetic magnetite. The theoretical content of Fe(II) was 24.12%, the determined one was 24.02 ± 0.10%. The method was applied to the determination of the homogeneity of an iron catalyst for ammonia synthesis.