Adsorption Behaviour of 134Cs and 22Na Ions on Tin and Titanium Ferrocyanides

Tin and titanium ferrocyanides were studied as adsorbents for alkali metal ions, viz., ¹³⁴Cs and ²²Na, which represent radioactive wastes. The ferrocyanides were prepared in granular form. The tin version contained 11.2% water, while the titanium version contained 17.7% water. The exchange capacities for Cs⁺ and Na⁺ in the hydrated tin version were about 1.5 and 0.7 meq/g, respectively, while those in the titanium version were 2.2 and 1.2 meq/g, respectively. Drying at 250°C decimated those capacities. The diffusional time constant of Cs⁺ at 25°C, determined via Fick's second law, was of order of magnitude 1 × 10^–3 s^–1, though there were minor differences due to particle size and the form of ferrocyanide. Similarly, the effective diffusivity was of order of magnitude 1 × 10^–8 cm²/s. The titanium version responded slightly faster than the tin version. Likewise, equilibrium measurements in mixtures with sodium nitrate, potassium nitrate, or uranium oxide, showed that the titanium version exhibited significantly greater selectivity for Cs⁺ than did the tin version. Unfortunately, tests of complete elution of the Cs⁺ from the ferrocyanides were mostly disappointing. Work continues on that subject.     

The deoxygenation kinetics of new oxovanadium(IV) complexes

Summary The deoxygenation reaction kinetics of some monomeric, dimeric and polymeric oxovanadium(IV) complexes with SOCl₂ have been studied by the stopped-flow technique in DMF. The reaction is bimolecular and obeys second-order kinetics; first-order in both SOCl₂ and complex. The polymeric halogeno product decays with time, but at a rate much slower compared to the rate of its formation. The correlation observed between the structure of these complexes and their reactivities is discussed.     

Synthesis and studies of antibacterial activity of pongaglabol

Pongaglabol [8-hydroxy-5-phenyl-furo[2,3-h]benzo(b)pyran-7-one] was synthesized and tested for antibacterial effects againstShigella dysenteriae, Salmonella typhi, Streptococcus β-haemolyticus andStaphylococcus aureus. The synthesized compounds were characterized using UV, IR and¹H NMR spectral data     

Substituted γ-lactones. Some observations on the synthesis and reactivity of 4-aroyl-3-hydroxy-2(5H)-furanones

The reaction pathway towards formation of 4-aroyl-3-hydroxy-2(5H)-furanones 1 from the base catalyzed reaction between an acetophenone, diethyl oxalate and formaldehyde was investigated. If methoxide was used as base, a transesterification was found to occur in the first step, while a side reaction, namely the retro Claisen reaction, was in competition with the desired lactone formation in the second step. The nature of the solvent and the acidic character of 1 as well as the basicity of the aminoarylene were found to have a profound influence on the course of the reaction of 1 with aminoarylenes.     

Substituted γ-lactones: On the structural elucidation of the reaction products from 4-aroyl-3-hydroxy-2(5H)-furanones and 1,2-diamines

The reaction pathway of 4-aroyl-3-hydroxy-2(5H)-furanones 1 with diamines depends on the nature of the amine as well as on the applied reaction conditions. Thus, the reaction of 1a-d with 5,6-diamino-1,3-dimethyluracil 5 led to the formation of two isomeric Schiff bases 7a-d and 8a-d . Conversely type 1 compounds reacted with 4,5-diaminopyrimidine 9 or 2,3-diaminopyridine 10 to form the mono acid-base adducts 11a and 11b respectively. When type 1 compounds were reacted with aliphatic diamines 13a-d or p-phenylenediamine and p-xylenediamine, respectively also an immediate formation of acid-base adducts 15a-f was observed. The reaction of a number of O-methylated type 1 compounds with 1,2-ethylenediamine afforded the novel seven-membered ring compounds 18a-d in good yields. The analogous reaction of O-alkylated 1a with o-phenylenediamine 2 or 2,3-diaminonaphthalene gave the expected tricyclic ring systems 19 or 20 .     

Synthesis of Important New Pyrrolo[3,4‐c]Pyrazoles and Pyrazolyl‐Pyrrolines from Heterocyclic β‐Ketonitriles

Treatment of heterocyclic β‐ketonitriles 1a,b with hydrazine hydrate and phenylhydrazine afforded the hydrazine derivatives 2a‐d which cyclized in PPA into pyrrolo[3,4‐c]pyrazoles 3a‐d. Reaction of 1a,b with cyanoacetohydrazide furnished the cyanoacetyl pyrrolo[3,4‐c]pyrazoles 4a,b. The hydrazine 2c reacted with β‐diketone and β‐ketoesters to afford pyrazolyl‐pyrrolines 5‐7. Also the later hydrazine reacted with some D‐aldoses and aceteophenone to give the corresponding hydrazones 10‐12 and hydrazine carboxamide derivatives 15a,b respectively.     

A facile synthesis of novel triazoloquinoxahnones and triazinoquinoxalinones

A series of 1-aryl-s-triazolo[4,3-a]quinoxalin-4-ones, 3 , were synthesized via the pyrolysis of the corresponding hydrazones, 6 . Thus, the cyclodehydrogenation occurred by refluxing them in an inert solvent (e.g. ethylene glycol) to give the triazoloquinoxalin-4-ones in a satisfactory yield. Using DMSO as a solvent for the above transformation afforded as a minor by-product an S-ylid. In contrast to earlier findings, annelation of a six-membered ring was successful and achieved through the pyrolysis of the pyruvate hydrazones derived of the quinoxalin-4-ones at ?230° to give the as-triazino[4,3-a]quinoxalin-5-ones, 4 . The reaction of 5 with acetylacetone afforded 3-(3′,5′-dimethylpyrazol-1-yl)-2(1H)-quinoxalinone, 10 . The structural assignments for the new compounds were based on their elemental analysis and spectroscopic data as well as an independent synthesis.     

Thermal analysis of pharmaceutical compounds

Some sulphonamides are evaluated by means of thermal analysis. Use is made of their characteristic endothermic DTA peaks (melting peaks), where the area changes linearly with variations in the amount of sulphonamides. The method is suitable for the determination of 30–100 mg of sulphathiazole, sulphisomidine, sulphaguanidine, sulphacetamide sodium and sulphamethoxypyridazine with reasonable accuracy. As for sulphisoxazole, two peaks are used for its determination: an endothermic one to determine 30–100 mg, and an exothermic one to determine 6–30 mg.

---

Zusammenfassung Einige Sulphonamide wurden durch thermische Analyse bestimmt, wobei von der linearen Abhängigkeit der Fläche der charakteristischen endothermen DTA-Peaks (Schmelzpeaks) von der Menge der Sulphonamide Gebrauch gemacht wurde. Mit der Methode können 30–100 mg Sulphathiazol, Sulphisoimidin, Sulphaguanidin, Natrium-Sulphacetamid und Sulphamethoxypyridazin mit ausreichender Genauigkeit bestimmt werden. Bei der Bestimmung von Sulphisooxazol wurde ein endothermer Peak für Mengen von 30–100 mg und ein exothermer für geringere Mengen von 6–30 mg herangezogen.

---

. - ( ), . 30–100 , , , . , — 30 100 , — 6 30 .