Spectroscopic characterization of core and shell regions in monolayer protected gold nanoparticles

We report studies on the structure of the metallic core and the alkyl cap layer in monolayer protected gold nanoparticles having sizes down to 1.6 nm. These particles are obtained by laser ablating gold targets in alkane-thiol solutions at different concentrations. The electronic structure of gold core and the vibrational properties of the capping hydrocarbon chains reveal effects connected with the nanosized nature of the particles.     

Optimal Control in Heterogeneous Domain Decomposition Methods for Advection-Diffusion Equations

New domain decomposition methods (DDM) based on optimal control approach are introduced for the coupling of first and second order equations on overlapping subdomains. Several cost functionals and control functions are proposed. Uniqueness and existence results are proved for the coupled problem, and the convergence of iterative processes is analyzed. The work was supported by the Russian Foundation for Basic Research (04-01-00615) and it was partly carried out while the first author was visiting the IACS at EPFL.     

Ion implantation induced by Cu ablation at high laser fluence

High energy laser plasma-produced Cu ions have been implanted in silicon substrates placed at different distances and angles with respect to the normal to the surface of the ablated target. The implanted samples have been produced using the iodine high power Prague Asterix Laser System (PALS) using 438 nm wavelength irradiating in vacuum a Cu target. The high laser pulse energy (up to 230 J) and the short pulse duration (400 ps) produced a non-equilibrium plasma expanding mainly along the normal to the Cu target surface. Time-of-flight (TOF) technique was employed, through an electrostatic ion energy analyzer (IEA) placed along the target normal, in order to measure the ion energy, the ion charge state, the energy distribution and the charge state distribution. Ions had a Boltzmann energy distributions with an energy increasing with the charge state. At a laser fluence of the order of 6 × 10⁶ J/cm², the maximum ion energy was about 600 keV and the maximum charge state was about 27+.In order to investigate the implantation processes, Cu depth profiles have been performed with Rutherford backscattering spectrometry (RBS) of 1.5 MeV helium ions, Auger electron spectroscopy (AES) with 3 keV electron beam and 1 keV Ar sputtering ions in combination with scanning electron microscopy (SEM). Surface analysis results indicate that Cu ions are implanted within the first surface layers and that the ion penetration ranges are in agreement with the ion energy measured with IEA analysis.     

Multilayered Cu–Ti deposition on silicon substrates for chemiresistor applications

Abstract

On the perspective to develop CuO–TiO₂ MOS, multilayered Cu and Ti thin layers were alternatively deposited on silicon wafers using 25?keV Ar?+?ion beam sputtering and, subsequently, oxidized by thermal annealing in air at 400?°C for 24?h. The deposited films have variable ratios of the Cu and Ti % at. One of the main goal is to obtain such multilayers avoiding the presence of Cu–Ti–O compounds. The samples were characterized in terms of composition (by RBS and SIMS analyses) and morphology (by AFM and SEM investigations). In particular, SIMS maps allows to observe the spatial distribution and thickness of each phase of the Cu/Ti multilayers, and further to observe Cu diffusion and mixing with Ti, as well as phase separation of CuO and TiO₂ in the samples. The reasons of this effect represent an open issue that has to investigated, in order to improve the MOS fabrication.     

Characterization of a Smartphone Camera's Response to Ultraviolet A Radiation

As part of a wider study into the use of smartphones as solar ultraviolet radiation monitors, this article characterizes the ultraviolet A (UVA; 320–400 nm) response of a consumer complementary metal oxide semiconductor (CMOS)‐based smartphone image sensor in a controlled laboratory environment. The CMOS image sensor in the camera possesses inherent sensitivity to UVA, and despite the attenuation due to the lens and neutral density and wavelength‐specific bandpass filters, the measured relative UVA irradiances relative to the incident irradiances range from 0.0065% at 380 nm to 0.0051% at 340 nm. In addition, the sensor demonstrates a predictable response to low‐intensity discrete UVA stimuli that can be modelled using the ratio of recorded digital values to the incident UVA irradiance for a given automatic exposure time, and resulting in measurement errors that are typically less than 5%. Our results support the idea that smartphones can be used for scientific monitoring of UVA radiation.     

Ultraviolet Reflection Irradiances and Exposures in The Constructed Environment For Horizontal,Vertical and Inclined Surfaces

Ultraviolet (UV) reflection in the urban constructed environment is not well understood for topical issues such as measuring and modeling the received UV exposure due to that UV reflection for outdoor workers. Both predominantly specular and diffuse reflecting surface types have been identified and investigated for the erythemal UV reflection ratio variation due to solar zenith angle and orientation. This paper presents relationships between erythemal UV reflection ratios measured for non‐horizontal and horizontal surfaces, with predominantly specular surface types indicating stronger relationships with solar zenith angles than diffuse reflecting surfaces types. Erythemal UV exposures caused by the same reflecting surface types at three inclinations are also investigated. Non‐horizontal surfaces can increase erythemal UV exposures compared to erythemal UV exposures received from the same horizontal surface by factors of 1.07–1.46 for specific body sites and by 1.01–1.70 for averages of group body sites for zinc aluminium coated steel sheeting.     

Seasonal Variations in the Subsurface Ultraviolet‐B on an Inshore Pacific Coral Reef Ecosystem

Fringing coral reefs provide a unique opportunity to study shallow aquatic ecosystems. A fringing coral reef system located in close proximity to a developed region was considered in this study. In such an environment, the rate of decay of dissolved organic matter is high and the penetration of higher energy ultraviolet‐B (UVB) extends a greater influence on species diversity, particularly upon shallow benthic communities. Results from a 9 month subsurface UVB exposure measurement campaign performed at a site located on the southern Queensland coast (Hervey Bay, 25°S) are presented in this research. For this, a novel dosimetric technique was utilized to measure long‐term subsurface UVB exposures. The resultant data set includes exposure measurements made during the significant La Niña event of late 2010 which resulted in unprecedented high sea surface temperatures and severe flooding across eastern Australia, impacting upon the lagoon regions of the Great Barrier Reef and Queensland's southern estuaries, including the study site. The influence of season, diurnal tidal variation, cloud cover and solar zenith angle were analyzed over the campaign period. Mean minimum daylight water depth was found to be the most significant factor influencing subsurface UVB.     

From Fish Waste to Value: An Overview of the Sustainable Recovery of Omega-3 for Food Supplements

The disposal of food waste is a current and pressing issue, urging novel solutions to implement sustainable waste management practices. Fish leftovers and their processing byproducts represent a significant portion of the original fish, and their disposal has a high environmental and economic impact. The utilization of waste as raw materials for the production of different classes of biofuels and high-value chemicals, a concept known as “biorefinery”, is gaining interest in a vision of circular economy and zero waste policies. In this context, an interesting route of valorization is the extraction of omega-3 fatty acids (ω-3 FAs) for nutraceutical application. These fatty acids, such as eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA) have received attention over the last decades due to their beneficial effects on human health. Their sustainable production is a key process for matching the increased market demand while reducing the pressure on marine ecosystems and lowering the impact of waste production. The high resale value of the products makes this waste a powerful tool that simultaneously protects the environment and benefits the global economy. This review aims to provide a complete overview of the sustainable exploitation of fish waste to recover ω-3 FAs for food supplement applications, covering composition, storage, and processing of the raw material.     

Evaluation of the Long‐term Cumulative UVA Facial Exposure of Queensland School Teachers derived for an Extended Period from the OMI Satellite Irradiance

This research presents a novel methodology for deriving the total daily broadband solar UVA (320–400 nm) received by school teachers during their working day from Ozone Monitoring Instrument (OMI) satellite solar noon UVA irradiance measurements for a Queensland subtropical site (27.5°S, 152°E). Daily UVA exposures are weighted to the anatomical human cheek (anterior infra‐orbital region) for teachers wearing and not wearing broad‐brimmed hats. The method utilizes the OMI UVA irradiance data collected daily at high temporal resolution over 2005 to 2016 to derive the total daily UVA exposure to a horizontal plane. These horizontal plane exposures are scaled by factors to take into account the timing of outdoor activity. The relationship between exposures to a horizontal plane and those to a vertical plane and the protection provided by a broad‐brimmed hat was assessed to evaluate the total daily UVA exposures to the cheek for classroom and physical education teaching staff expected to be outside at different periods of the day. The developed method enables the total daily UVA exposure to specific anatomical sites to be evaluated from the satellite solar noon irradiance at locations that do not have access to surface‐based instrumentation capable of recording in the solar UVA waveband.