A short and efficient synthesis of (+)-disparlure and its enantiomer

A short and highly efficient approach was applied for the total synthesis of the gypsy moth sex pheromone (+)-disparlure and its enantiomer from isopropylidene D- and L-erythrose, using a common strategy.     

Determination of the degree of cure under dynamic and isothermal curing conditions with electrical impedance spectroscopy

This article presents a new methodology for the quantitative determination of the progress of the curing reaction of a thermosetting resin, using the results of electrical impedance spectroscopy. The method is an extension of the use of the imaginary impedance maximum as a reaction progress indicator and is based on the demonstration of a close correlation between the reaction rate, as measured by conventional differential scanning calorimetry, and the rate of change of the value of the imaginary impedance spectrum maximum. Tests on a commercial aerospace epoxy resin under both isothermal and dynamic heating conditions with calorimetry and impedance spectroscopy have demonstrated the validity of the method and set the accuracy limits involved. This technique can be used as a real-time online control tool for thermoset composite manufacturing. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 146–154, 2004     

A highly efficient synthesis of [1-C, O]- and [1-C, H2]-glycerol for the elucidation of biosynthetic pathways

Labeled glycerol is a widely used biochemical probe to investigate biosynthetic pathways. A highly efficient synthesis of [1-¹³C, ¹⁸O]- and [1-¹³C, ²H₂]-glycerol is described in which the ¹³C label is introduced using cyanide. The ¹⁸O label was introduced by a Pinner synthesis and reduction of the ester 5 allowed incorporation of the ²H labels.     

A convenient synthesis of 2-C-methyl-d-erythritol 4-phosphate and isotopomers of its precursor

A new synthetic approach toward 2-C-methyl-d-erythritol 4-phosphate (MEP), a key intermediate in the mevalonate-independent biosynthetic pathway for isoprenoids, and deuterated analogues of its precursor, 2-C-methyl-d-erythritol acetonide, is described. This procedure uses 2-C-methyl-d-erythrose acetonide as starting material and delivers, through a mono-protection strategy, the target compounds in a short way and in high yield.     

Development of a Wine Metabolomics Approach for the Authenticity Assessment of Selected Greek Red Wines

Wine metabolomics constitutes a powerful discipline towards wine authenticity assessment through the simultaneous exploration of multiple classes of compounds in the wine matrix. Over the last decades, wines from autochthonous Greek grape varieties have become increasingly popular among wine connoisseurs, attracting great interest for their authentication and chemical characterization. In this work, 46 red wine samples from Agiorgitiko and Xinomavro grape varieties were collected from wineries in two important winemaking regions of Greece during two consecutive vintages and analyzed using ultra-high performance liquid chromatography-quadrupole time-of-flight mass spectrometry (UHPLC-QToF-MS). A targeted metabolomics methodology was developed, including the determination and quantification of 28 phenolic compounds from different classes (hydroxycinnamic acids, hydroxybenzoic acids, stilbenes and flavonoids). Moreover, 86 compounds were detected and tentatively identified via a robust suspect screening workflow using an in-house database of 420 wine related compounds. Supervised chemometric techniques were employed to build an accurate and robust model to discriminate between two varieties.     

An adaptive way for improving noise reduction using local geometric projection

We propose an adaptive way to improve noise reduction by local geometric projection. From the neighborhood of each candidate point in phase space, we identify the best subspace that the point will be orthogonally projected to. The signal subspace is formed by the most significant eigendirections of the neighborhood, while the less significant ones define the noise subspace. We provide a simple criterion to separate the most significant eigendirections from the less significant ones. This criterion is based on the maximum logarithmic difference between the neighborhood eigendirection lengths, and the assumption that there is at least one eigendirection that corresponds to the noise subspace. In this way, we take into account the special characteristics of each neighborhood and introduce a more successful noise reduction technique. Results are presented for a chaotic time series of the Henon map and Ikeda map, as well as on the Nasdaq Composite index.     

Preparation of hydroxyapatite via microemulsion route

Hydroxyapatite (HAp) was prepared using a microemulsion route in combination with the pH-shock wave method. The samples as received consisted of amorphous aggregated particles, which had remarkable mesoporosity with a narrow pore size distribution. After being heated at 650 degrees C, the A-type carbonate hydroxyapatite was crystallized at 635 degrees C in particles of similar size (40--120 nm) with no internal porosity. At a higher temperature (900 degrees C) a sintering process took place, resulting in network of a larger particles, consisting of HAp and beta-tricalcium phosphate (beta-TCP). The crystallization of HAp occurs at 635 degrees C with an activation energy of 62.7--72.2 kcalmol(-1).     

PMMA/organomodified montmorillonite nanocomposites prepared by in situ bulk polymerization

Kinetics of the in situ bulk polymerization of methyl methacrylate in the presence of organomodified montmorillonite (MMT) was investigated using differential scanning calorimetry (DSC) and gravimetrically. Different amount and types of MMT under the trade names Cloisite were employed. Using DSC, the amount of heat released versus time, under isothermal conditions, was recorded, and eventually, the time evolution of polymerization rate and monomer conversion was calculated. Results on the variation of monomer conversion with reaction time were in good agreement to corresponding from the gravimetric measurements. The nanocomposites prepared were characterized with WAXD, TEM and FTIR, and their glass transition temperature, T _g, was measured with DSC. Depending on the added amount of nano-MMT, either exfoliated or intercalated structures were obtained. An enhancement of the polymerization rate with the presence of the nanoparticles was observed especially in the gel effect region. This was accompanied by a higher T _g and average molecular weight, as measured by GPC, of all nanocomposites compared to neat PMMA.     

Adsorption of block copolymers in nanoporous alumina

We have studied the adsorption of end-attaching block copolymer chains inside the cylindrical pores of nanoporous alumina. Highly asymmetric PS-PEO block copolymers, with a small PEO anchoring block and a long PS dangling block, were allowed to adsorb onto porous alumina substrates with an average pore diameter of ∼200 nm from toluene solution. The adsorption process was monitored using FTIR spectroscopy, whereas depth profile analysis was performed by means of XPS and Ar⁺ ion sputtering. It is found that the PS-PEO adsorption kinetics in porous alumina are ∼4 orders of magnitude slower than the corresponding case of a flat alumina substrate. It appears that chains adsorbed near the pore entrance early on tend to form a barrier for chains entering the pore at later times, thereby slowing down the adsorption process significantly. This effect is much more pronounced for large chains whose dimensions are comparable with the pore diameter. The equilibrium adsorbance value is also affected by chain size due to the additional entropic penalty associated with chain confinement, the adsorbance falling substantially when the chain dimensions become comparable with the pore diameter. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1676–1682, 2010