Analysis of a Young–Michelson tandem interferometer

In a Young–Michelson tandem interferometer a Michelson interferometer is illuminated through a pair of Young slits. The pattern produced by this set-up is analyzed theoretically. The consequences of small misalignments and uncompensated arms in the Michelson interferometer are studied. The effects of the spatial and temporal partial coherence of the source are also explored. Experimental results using a laser source are shown to be in good agreement with the predicted theoretical calculations.     

Thermal analysis study on vaporization of some analgesics. Acetanilide and derivatives

The thermal behaviour of acetanilide (Ac) and two of its analogues, namely the para-ethoxyacetanilide (p-Eto Ac) and the para-bromoacetanilide (p-Br Ac), which are used as analgesics in the pharmaceutical industry was studied with a simultaneous TG/DSC unit. The examined analgesics showed two endothermic DSC peaks due to melting and vaporization. By combining the experimental TG data with the corresponding reference vapour pressure data obtained with the Antoine equation the plot of P versus v was derived. From the slope of this equation the constant k-value was determined for Ac. Then, using the same k-value the vapour pressures of p-Eto Ac and p-Br Ac were determined in the same temperature range. The vaporization enthalpies for all the studied compounds were obtained from different methods and a very good agreement was found. Vaporization follows a zero-order kinetics. The activation energy of vaporization (E_vap) was calculated from the dynamic TG experiments, using the Arrhenius equation.     

Ion chromatography characterization of polysaccharides in ancient wall paintings

Specific programming of automated HPLC systems allows total on-line qualification, validation and stability monitoring using the concept of deferred standards. Setting up such a process for routine analyses in an automated HPLC system requires specific autosampler programming as well as specific monitoring software. With an autosampler, a double injection procedure is programmed, the first introducing the sample, and the second, a few minutes deferred, the deferred control standard. Two additional compounds are therefore added to the sample before and during the chromatographic process: the intemal standard for sample quantification and the deferred standard for system control. Specific methodologies are described of how to obtain classical quantitative analysis information as well as system qualification validation stability information. Experiments were performed to develop specified methodologies to monitor the quality of quantitative analysis during the life of the column by using the deferred standard concept to probe the effects of column ageing on separation characteristics.     

1,2-Oxopalladation versus pi-allyl palladium route. A regioconvergent approach to a key intermediate for cyclopentanoids synthesis. New insights into the Pd(II)-catalyzed lactonization reaction

Regioconvergent synthesis of the key lactone 1 from an equimolar mixture of the two olefins 4 and 5 was achieved by unique Pd(II) chemistry. The synthetic versatility of lactone 1 has been demonstrated in the synthesis of iridoids and of the endo-Corey lactone 2, which is a key intermediate for the F(2)-isoprostane synthesis. Upon exposure of the sodium salts of 4 and 5 to a catalytic amount of Pd(OAc)(2) under oxygen, in the presence of AcOH, an isomeric lactone 12 was obtained in addition to the title compound 1. The Pd(II) lactonization was optimized by fine-tuning all the factors participating in the catalytic cycle: solvent, oxidant, co-oxidant, and Pd(II) source. The Hosokawa's heterobimetallic couple emerged as the catalyst of choice. With a Cu(II)-Pd(II) couple, the redox process was transferred to copper, and the formal oxidation state of palladium remained constant during the reaction. By virtue of this new methodology, lactone 1 was obtained in a rewarding 60% yield, along with isomeric lactone 12 in 30% yield. A detailed mechanistic study was carried out in order to elucidate the formation of lactones 1 and 12. Lactone 1 was formed from either olefin 8 or olefin 10; on the other hand, lactone 12 was formed exclusively from olefin 10. An intramolecular 1,2-acyloxypalladiation was invoked for the transformation of 8 into 1, whereas the pi-allyl complexes 13 and 11 were involved in the transformation of olefin 10 into 12 and 1, respectively.     

Evaluation of hydrogen line emission and argon plasma electron concentrations resulting from the gaseous sample injection involved in hydride generation-ICP-atomic emission spectrometric analysis

The simultaneous injection of volatile hydride species and hydrogen gas, originating in reagent decomposition, was monitored during the operation of a continuous hydride generation manifold employed for the determination of trace arsenic by HG-ICP-AES. Line and background intensities as well as the FWHM of the hydrogen Hgamma and Hdelta lines were measured, and electron number densities (ne) estimated from Stark broadening of the line profiles. Results were compared with those obtained by conventional pneumatic injection of aqueous solutions. Overlapping with atomic nitrogen lines at 410 nm and 411 nm tends to distort the Hdelta line profile for the hydrogen-seeded plasma, rendering unreliable results. The N I lines seem to be quenched by the presence of water aerosol. More consistent results were obtained with the Hgamma line. When no solutions are pumped through the hydride generation manifold ("dry" plasma), the measured ne value was (1.57 +/- 0.22) x 10(15)cm(-3). Conversely, when the reducing reagent flow was replaced by pure water (corresponding to the injection of water vapor in equilibrium that is swept by the argon carrier gas passing through the phase separator), the electron concentration is 25% higher. In that case the ne value agrees between the experimental error with that obtained for a plasma in which a water aerosol is introduced at a flow rate of 1 mL/min. An enhancement of 52% relative is observed in ne when the system is operated under optimized conditions for arsine generation, employing sodium tetrahydroborate in acidic medium as reducing agent (i.e. hydrogen seeded plasma). It was also observed that the continuum emission near 410 nm for the hydrogen containing plasma correlates with the measured electron number density, suggesting that the background enhancement under hydride generation conditions may respond to the ion-electron recombination mechanism.     

Hydrido-Carbonyl Rhenium Clusters with a Square Geometry of the Metal Core. Synthesis and X-Ray Characterization of the Novel [Re4(μ-H)3(CO)16]− Anion

Three and tetranuclear ring clusters have been obtained by treatment of [Re₂(CO)₈(THF)₂] with carbonyl-rhenates containing two terminal hydrides. The reaction with [ReH₂(CO)₄]^- provided a selective route to the previously known [Re₃(-H)₂(CO)₁₂]^- triangular cluster anion 1. The reaction with [Re₂H₂(-H)(CO)₈]^- gave the novel [Re₄(-H)₃(CO)₁₆]^- anion 2, containing a rare example of a puckered-square metal cluster. Protonation of 1 is known to afford the neutral [Re₃(-H)₃(CO)₁₂] species 3. Analogously the reaction of 2 with a strong acid afforded the previously known square metal clusters [Re₄(-H)₄(CO)₁₆] 4. The reaction could not be reversed by treatment with bases. Photolysis of 4 gave the unsaturated complex [Re₂(-H)₂(CO)₈] 5: this is the reverse of the dimerization reaction, that in THF at room temperature produces 4 from 5. Thermal treatment (reflux in cyclohexane for 24 h) left 4 almost unchanged. A single crystal X-ray analysis of [NEt₄]2 showed a s/e/s/s (e=eclipsed, s=staggered) conformation of the Re(CO)₄ units, leading to a puckered geometry of the ring, at variance with the square-planar geometry of 4 (all eclipsed). Two of the three hydrides of 2 have been located as bridging the Re–Re edges from inside the metal ring, as previously observed in 4. Density functional computations indicated a puckered conformation as the most stable for both 2 and 4, with very low activation energies for ring inversion (6.6 and 2.2 kcal·mol^-1, respectively), but ruled out solid state fluxionality for 4, whose observed planar geometry must be attributed to packing stabilization.     

Coordinating properties of C2-symmetric chiral bis(oxazolinylpyridinyl)dioxolane ligands

Metal complexes of general formula M(L)X₂ and M(L)X₃ [L = (4S,5S)-2,2-dimethyl-4,5-bis{6-[(4,5-dihydro-4-(S)-(1-methylethyl)oxazol-2-yl)pyridin-2-yl]}-1,3-dioxolane] were obtained by reacting, respectively, Co^II, Cu^II, Ni^II, and Zn^II nitrate salts and the Rh^III chloride salt, with a chiral C₂-symmetric bis(oxazolinylpyridinyl)dioxolane (L) ligand, in MeOH/CHCl₃ solution. A single crystal X-ray analysis was carried out on [Ni(L)(OH₂)₂](NO₃)₂ · 2H₂O and the molecular structure of L was also determined. In the free ligand the two symmetric arms are essentially planar and oriented nearly perpendicular to the dioxolane average plane. In the Ni complex one seven-membered and two five-membered chelation rings are formed. The metal atom also lies on the C₂ axis, and two symmetry-related water molecules complete the octahedral coordination environment. Both compounds crystallize in chiral space groups; the ligand crystallizes in orthorhombic system, space group C 2 2 2₁, Z = 4; the nickel complex crystallizes in tetragonal system, space group P 4₃ 2₁ 2, Z = 4.     

A comparison between different techniques for the isolation of rosemary essential oil

Traditional hydrodistillation (HD), supercritical fluid extraction (SFE), organic solvent extraction (SE), and water microwave assisted hydrodistillation (MAHD) techniques were compared and evaluated for their effectiveness in the isolation of rosemary essential oil. The microwave assisted hydrodistillation technique was optimized in terms of both delivered power and time duration. The extracts/distillates were analyzed by GC and GC-MS. Microwave distillation, which exploits the physical action of microwaves on plants, showed a series of advantages over the other approaches: low cost, use of water in sample pre-treatment step, greatly reduced isolation time, and attainment of high quality essential oil distillate. Moreover, the absence of environmental impact of this innovative technique was also emphasized.     

Synthesis, Structure, and Antimicrobial Activity of Complexes of Pt(II), Pd(II), and Ni(II) with the Condensation Product of 2-(Diphenylphosphino)benzaldehyde and Semioxamazide

Complexes of Pt(II), Pd(II), and Ni(II) with the condensation derivative of 2-(diphenylphosphino)benzaldehyde and semioxamazide were synthesized, characterized, and their antimicrobial activity was evaluated. The ligand and the complexes were characterized by spectroscopic methods with the particular accent on NMR spectral analysis. For the palladium(II) complex, the crystal structure was determined by X-ray analysis. In all the complexes the ligand is coordinated as a tridentate via a P, N, O donor set. The Pd(II) and Pt(II) complexes have a square planar geometry, whereas the geometry of the Ni(II) complex is tetrahedral. The ligand showed antibacterial and antifungal activity, which was enhanced upon complexation.