The cyclodimerisation of 3-methyl-2-butenenitrile

3-Methyl-2-butenenitrile (1) cyclodimerised on treatment with lithium diisopropylamide in dimethoxyethane at temperatures between ?78°C and 0°C to 3-amino-4-cyano-1,5,5-trimethyl-1,3-cyclohexadiene (2) the structure of which was established by acid hydrolysis to the known 4-cyano-1,5,5-trimethyl-1-cyclohexene-3-one (3).     

Conical parametric scattering of a single extraordinary beam in BaTiO3 crystal

In this paper, the parametric scattering of a single extraordinary polarized beam of laser in BaTiO₃ photorefractive crystal has been investigated experimentally and theoretically. The resulting pattern consists of beam fanning, isotropic ring, and anisotropic one. Among all parts of scattering pattern, isotropic ring has not been studied as much as beam fanning and anisotropic ring, and there still are some differences in reports about it. Therefore, the study has mainly focused on this part. In this experimental configuration, isotropic ring is just visible in positive angles although the other parts of parametric scattering pattern can be visible from behind and in front of the crystal. In addition to steady state pattern in forward and backward directions, its transient behavior with the rotation of crystal has been studied. The results of experiments have been analyzed carefully, and their theoretical explanations have been presented based on the standard theory of parametric scattering in photorefractive crystals. It has been shown that this configuration corresponds to the so called parametric B-process scattering.     

Ultrasound measurements of cavitation bubble radius for femtosecond laser-induced breakdown in water

A recently developed ultrasound technique is evaluated by measuring the behavior of a cavitation bubble that is induced in water by a femtosecond laser pulse. The passive acoustic emission during optical breakdown is used to estimate the location of the cavitation bubble's origin. In turn, the position of the bubble wall is defined based on the active ultrasonic pulse-echo signal. The results suggest that the developed ultrasound technique can be used for quantitative measurements of femtosecond laser-induced microbubbles.     

Estimation of shear wave velocity in gelatin phantoms utilizing PhS-SSOCT

We report a method for measuring shear wave velocity in soft materials using phase stabilized swept source optical coherence tomography (PhS-SSOCT). Wave velocity was measured in phantoms with various concentrations of gelatin and therefore different stiffness. Mechanical waves of small amplitudes (??10 ??m) were induced by applying local mechanical excitation at the surface of the phantom. Using the phase-resolved method for displacement measurement described here, the wave velocity was measured at various spatially distributed points on the surface of the tissue-mimicking gelatin-based phantom. The measurements confirmed an anticipated increase in the shear wave velocity with an increase in the gelatin concentrations. Therefore, by combining the velocity measurements with previously reported measurements of the wave amplitude, viscoelastic mechanical properties of the tissue such as cornea and lens could potentially be measured.     

Estimation of mechanical properties of a viscoelastic medium using a laser-induced microbubble interrogated by an acoustic radiation force

An approach to assess the mechanical properties of a viscoelastic medium using laser-induced microbubbles is presented. To measure mechanical properties of the medium, dynamics of a laser-induced cavitation microbubble in viscoelastic medium under acoustic radiation force was investigated. An objective lens with a 1.13 numerical aperture and an 8.0 mm working distance was designed to focus a 532 nm wavelength nanosecond pulsed laser beam and to create a microbubble at the desired location. A 3.5 MHz ultrasound transducer was used to generate acoustic radiation force to excite a laser-induced microbubble. Motion of the microbubble was tracked using a 25 MHz imaging transducer. Agreement between a theoretical model of bubble motion in a viscoelastic medium and experimental measurements was demonstrated. Young's modulii reconstructed using the laser-induced microbubble approach were compared with those measured using a direct uniaxial method over the range from 0.8 to 13 kPa. The results indicate good agreement between methods. Thus, the proposed approach can be used to assess the mechanical properties of a viscoelastic medium.     

Self-chemical ionization of diethylzinc

The self-chemical ionization of diethylzinc is examined by Fourier transform ion cyclotron resonance (FT-ICR) mass spectrometry and semiempirical molecular orbital calculations. Electron impact of diethylzinc neutral produces the radical cation, C(4)H(15)Zn(+) (m/z x 122), which reacts further with the neutral (C(2)H(5))(2)Zn to give the following product ions: Zn(+) (m/z x 64), C(2)H(5)Zn(+) (m/z x 93), C(4)H(9)Zn(+) (m/z x 121), C(4)H(11)Zn(2)(+) (m/z x 187), and C(6)H(15)Zn(2)(+) (m/z x 215). To determine the structure and pathways for production of these ions, monoisotopic (12)C(4)H(15)(64)Zn(+), (64)Zn(+) and (12)C(2)H(5)(64)Zn(+) were individually isolated and reacted with the neutral background. We also performed semiempirical molecular orbital calculations (ZINDO/1). The molecular orbital calculations and experimental data are consistent in predicting that the ethyl group on the diethylzinc cation carries the positive charge. Copyright 1999 John Wiley & Sons, Ltd.     

怀孕期头发中一些元素含量的变化趋势

用同步辐射激发X射线荧光分析,对11个产妇怀孕期间头发内一些元素含量的变化趋势进行了测量,在各自对比的基础上,得到了一些结果。     

On the Possibility of Applying Fluoride Neodymium-Activated Crystals as Light-Controlled Gates for ArF Laser Radiation (193 nm)

Optics and Spectroscopy - Optical properties of KY3F10:Nd3+, Na3Y6F22:Nd3+, SrF2:Nd3+, and CaF2:Nd3+ fluoride crystals in the UV and VUV spectral regions are presented. Absorption spectra from the...     

Adaptive beamforming for photoacoustic imaging

An adaptive photoacoustic image reconstruction technique that combines coherence factor (CF) weighting and the minimum variance (MV) method is introduced. The backprojection method is widely used to reconstruct photoacoustic tomography images. Owing to the scattering of light, the quality of the photoacoustic imaging can be degraded. CF, an adaptive weighting technique, is known to improve the lateral resolution of photoacoustic images. In addition, an MV adaptive beamforming method can further improve the image quality by suppressing signals from off-axis directions. Experimental studies are performed to quantify the spatial resolution and contrast of the adaptive photoacoustic beamforming methods.     

Motion of a solid sphere in a viscoelastic medium in response to applied acoustic radiation force: Theoretical analysis and experimental verification

The motion of a rigid sphere in a viscoelastic medium in response to an acoustic radiation force of short duration was investigated. Theoretical and numerical studies were carried out first. To verify the developed model, experiments were performed using rigid spheres of various diameters and densities embedded into tissue-like, gel-based phantoms of varying mechanical properties. A 1.5 MHz, single-element, focused transducer was used to apply the desired radiation force. Another single-element, focused transducer operating at 25 MHz was used to track the displacements of the sphere. The results of this study demonstrate good agreement between theoretical predictions and experimental measurements. The developed theoretical model accurately describes the displacement of the solid spheres in a viscoelastic medium in response to the acoustic radiation force.