Effect of absorbed pump power on the quality of output beam from monolithic microchip lasers

The dependence of the beam propagation factor (M ² parameter) with the absorbed pump power in the case of monolithic microchip laser under face-cooled configuration is extensively studied. Our investigations show that the M ₂ parameter is related to the absorbed pump power through two parameters (α and β) whose values depend on the laser material properties and laser configuration. We have shown that one parameter arises due to the oscillation of higher order modes in the microchip cavity and the other parameter accounts for the spherical aberration associated with the thermal lens induced by the pump beam. Such dependency of M ² parameter with the absorbed pump power is experimentally verified for a face-cooled monolithic microchip laser based on Nd³⁺ -doped GdVO₄ crystal and the values of α and β parameters were estimated from the experimentally measured data points.     

A new three-flavor oscillation solution of the solar neutrino deficit in <Emphasis Type="Italic">R</Emphasis>-parity violating supersymmetry

We present a solution of the solar neutrino deficit using three flavors of neutrinos and R-parity non-conserving supersymmetry. In this model, in vacuum, the is massless and unmixed, mass and mixing being restricted to the - sector only, which we choose in consistency with the requirements of the atmospheric neutrino anomaly. The flavor changing and flavor diagonal neutral currents present in the model and the three-flavor picture together produce an energy dependent resonance-induced - mixing in the sun. This mixing plays a key role in the new solution to the solar neutrino problem. The best fit to the solar neutrino rates and spectrum (1258-day SK and 241-day SNO data) requires a mass square difference of eV² in vacuum between the two lightest neutrinos. This solution cannot accommodate a significant day-night effect for solar neutrinos nor CP violation in terrestrial neutrino experiments. Received: 26 December 2001 / Revised version: 16 February 2002 / Published online: 26 July 2002     

Modification of magnetic anisotropy in metallic glasses using high-energy ion beam irradiation

Heavy ion irradiation in the electronic stopping power region induces macroscopic dimensional change in metallic glasses and introduces magnetic anisotropy in some magnetic materials. The present work is on the irradiation study of ferromagnetic metallic glasses, where both dimensional change and modification of magnetic anisotropy are expected. Magnetic anisotropy was measured using Mössbauer spectroscopy of virgin and irradiated Fe₄₀Ni₄₀B₂₀ and Fe₄₀Ni₃₈Mo₄B₁₈ metallic glass ribbons. 90 MeV ¹²⁷I beam was used for the irradiations. Irradiation doses were 5×10¹³ and 7.5×10¹³ ions/cm². The relative intensity ratios D ₂₃ of the second and third lines of the Mössbauer spectra were measured to determine the magnetic anisotropy. The virgin samples of both the materials display in-plane magnetic anisotropy, i.e., the spins are oriented parallel to the ribbon plane. Irradiation is found to cause reduction in magnetic anisotropy. Near-complete randomization of magnetic moments is observed at high irradiation doses. Correlation is found between the residual stresses introduced by ion irradiation and the change in magnetic anisotropy.     

The effect of grass fiber filler on curing characteristics and mechanical properties of natural rubber

Natural rubber is reinforced with a novel type of grass fiber (Cyperus Tegetum Rox b). The effects of fiber loading of different mesh sizes on curing characteristics and mechanical properties of grass fiber filled natural rubber composite are studied. Since 400 mesh grass fiber loaded natural rubber composite shows superior mechanical properties, therefore the effect of silane coupling agent was studied for this particular composite. Here composites were prepared by using water leached grass fiber. Optimum cure time increases with the increase in fiber loading but the change in scorch time is less. The same trend of increase in optimum cure time is observed in the presence of Si69. But the value is higher compared to that of rubber composite without Si69. With increase in the fiber loading, modulus and hardness of the composite increases but tensile strength decreases. The mechanical properties of the composite, namely moduli at 200 and 300% elongation and hardness increase in the presence of Si69 but tensile strength is less compared to that of the composite without Si69. Elongation at break is not much affected due to the presence of Si69. Copyright © 2004 John Wiley & Sons, Ltd.     

Semi‐classical formulation of time‐dependent discrete variable representation method

In this article, we apply a novel time‐dependent discrete variable representation (TDDVR) method proposed by Barkakaty and Adhikari to investigate tunneling through an Eckart barrier. This semi‐classical method is theoretically rigorous and straightforward to implement. Among the TDDVR formulations, this report presents the first derivation of a rigorous form of quantum force (QF) for the present perspective. The validity of this semi‐classical approach is demanded based on the excellent agreement of the tunneling probability with the corresponding quantum results. © 2004 Wiley Periodicals, Inc. Int J Quantum Chem, 2004     

Determination of thiocarbamyl sulphenamides, thiuram disulphides and dibenzothiazyl disulphide by amperometric titration

An amperometric method for the determination of thiocarbamyl sulphonamides has been developed, based on the cleavage of the S-N bond by hydriodic acid. The method can also be applied for the cleavage of the S-S bond in thiuram disulphides and dibenzothiazyl disulphide, and thus provides a useful means for the estimation of these compounds as well.     

Fluorination of polymers by sulfur hexafluoride gas under electric discharge

Fluorination of low-density polyethylene, polyacetylene, and poly(vinyl alcohol) was carried out using SF₆ gas under electric discharge. The polymers were partially fluorinated and the extent of fluorination was more in the case of poly (vinyl alcohol) than the other two polymers. The fluorinated polymers were characterized by elemental analysis (Fluorine), IR, and x-ray diffraction. Optical transparency of the films was also measured. The fluorinated polymers show better solvent resistance and decreased transparency than the virgin polymer. © 1994 John Wiley & Sons, Inc.     

Thermal stability and degradation of the post-use reclaim milk pouches during multiple extrusion cycles

In the present study, the recyclability of the post-use milk pouches (50/50 LDPE–LLDPE blend) was evaluated with or without adding stabilizer. Thoroughly washed and dried post-use milk pouch films were extruded five times at high temperature (483–513 K) in the open atmosphere. The mode of degradation during extrusion operation was studied by melt flow index (MFI), rheological properties, gel content and FT-IR analysis. The differential scanning calorimetry (DSC) analysis was carried out to evaluate the thermal stability of the stabilized and un-stabilized recycled mass from post-use milk pouch under this investigation. Mechanical properties (tensile strength, % elongation at break, tensile modulus and hardness) of the un-stabilized extruded material were significantly affected as a result of thermooxidative degradation during extrusion in presence of air. After all, stabilization with 0.4% anti-oxidant satisfactorily retains all the initial properties of the recycled material.