A gadolinium-based magnetic ionic liquid for supramolecular dispersive liquid–liquid microextraction followed by HPLC/UV for the determination of favipiravir in human plasma

Favipiravir is a potential antiviral medication that has been recently licensed for Covid-19 treatment. In this work, a gadolinium-based magnetic ionic liquid was prepared and used as an extractant in dispersive liquid–liquid microextraction (DLLME) of favipiravir in human plasma. The high enriching ability of DLLME allowed the determination of favipiravir in real samples using HPLC/UV with sufficient sensitivity. The effects of several variables on extraction efficiency were investigated, including type of extractant, amount of extractant, type of disperser and disperser volume. The maximum enrichment was attained using 50 mg of the Gd-magnetic ionic liquid (MIL) and 150 μl of tetrahydrofuran. The Gd-based MIL could form a supramolecular assembly in the presence of tetrahydrofuran, which enhanced the extraction efficiency of favipiravir. The developed method was validated according to US Food and Drug Administration bioanalytical method validation guidelines. The coefficient of determination was 0.9999, for a linear concentration range of 25 to 1.0 × 10⁵ ng/ml. The percentage recovery (accuracy) varied from 99.83 to 104.2%, with RSD values (precision) ranging from 4.07 to 11.84%. The total extraction time was about 12 min and the HPLC analysis time was 5 min. The method was simple, selective and sensitive for the determination of favipiravir in real human plasma.     

A survey of surface tension,molar volume and density for Sn–Ag–Cu–Bi–Sb quinary alloys as lead-free solders

ABSTRACT

By applying the geometric models and the theoretical equation, the surface tension, the molar volume and the density were studied. The empirical calculations were carried out in temperature range 623?K?≤?T?≤?1123?K. Only few thermophysical properties were estimated for eight quinary alloys: Sn3.55Ag0.5Cu3Bi3Sb, Sn3.48Ag0.5Cu3Bi5Sb, Sn3.48 Ag0.5Cu5Bi3Sb, Sn3.40 Ag0.5Cu5Bi5Sb, Sn3.53Ag1Cu3Bi3Sb, Sn3.46Ag1Cu3Bi5Sb, Sn3.46Ag1Cu5Bi3Sb, Sn3.38Ag1Cu5Bi5Sb. The results show that surface tension and density have a linear appearance for all temperatures. We have also studied the influence of the composition and temperature in the studied alloys. The obtained theoretical results are compared with the experimental ones and with the conventional Pb–Sn welds.     

Unexpected formation of N,N-disubstituted formamidines from aromatic amines, formamides and trifluoroacetic anhydride

An intriguing selectivity towards the formation of the formamidine was observed upon the reaction of an amine with sodium hydride and trifluoroacetic anhydride in dimethyl formamide. Various aromatic amines were reacted with a series of N,N-disubstituted formamides as a solvent under the influence of trifluoroacetic anhydride to thoroughly probe this behaviour. A trend in selectivity is discussed and a proposed mechanism for the reaction is also presented.     

Optimal stopping problems by two or more decision makers: a survey

A review of the optimal stopping problem with more than a single decision maker (DM) is presented in this paper. We classify the existing literature according to the arrival of the offers, the utility of the DMs, the length of the sequence of offers, the nature of the game and the number of offers to be selected. We enumerate various definitions for this problem and describe some dynamic approaches. Fouad Ben Abdelaziz is on leave from the Institut Superieur de Gestion, University of Tunis, Tunisia e-mail: foued.benabdelaz@isg.run.tn.     

Vorticity-velocity-pressure formulation for Stokes problem

We propose a three-field formulation for efficiently solving a two-dimensional Stokes problem in the case of nonstandard boundary conditions. More specifically, we consider the case where the pressure and either normal or tangential components of the velocity are prescribed at some given parts of the boundary. The proposed computational methodology consists in reformulating the considered boundary value problem via a mixed-type formulation where the pressure and the vorticity are the principal unknowns while the velocity is the Lagrange multiplier. The obtained formulation is then discretized and a convergence analysis is performed. A priori error estimates are established, and some numerical results are presented to highlight the perfomance of the proposed computational methodology.

     

The iron phosphate K3Fe5(PO4)6

The crystal structure of tripotassium pentairon hexaphosphate has been determined by single‐crystal X‐ray diffraction. The structure contains one Fe atom on a center of symmetry, one K, two Fe and two P atoms on twofold axes, and one Fe, two P and one K atom in general positions. The K₃Fe₅(PO₄)₆ structure consists of a complex three‐dimensional framework of corner‐sharing between iron polyhedra, and corner‐ and edge‐sharing between PO₄ tetrahedra and iron polyhedra (FeO₅ and FeO₆). This linkage between iron and phosphorus forms intersecting channels containing the K atoms.     

Telomerization by free-radical mercaptan chain transfer. IV. Effects of structure,solvent and initiator variation on the stereochemistry of acrylate ester–mercaptan telomers

Chain-transfer constants for radicals one to five units in length were determined for the methyl acrylate–isopropanethiol system. Effects of varying ester alkyl group, mercaptan solvent and initiator on three-unit diastereomer ratio were also investigated. It was found that the proportion of syndiotactic isomer increased as the size of either the ester alkyl group or the mercaptan increased, the latter result being equivalent to a penultimate effect. Polar solvents, on the other hand, favored the formation of the isotactic form. This effect was observed in the free-radical telomerization and to an even greater degree in the base-initiated anionic telomerization. Possible reasons for solvent effects are discussed.     

Modification of the cation exchange resin properties by impregnation in polyethyleneimine solutions: application to the separation of metallic ions

A commercial cation exchange resin Amberlite 200 has been modified after immersion in solutions of polyethyleneimine (PEI). The kinetic of fixation of the metallic ions have been determined. The modification of the surface of the resin deals with a change in the order of the affinities of the resins towards cations. The retention is the function of the formation and the stability of the complex. The conditions of modification (pH, PEI concentration and time of immersion) have been examined and the modification was confirmed by the determination of the exchange capacities, the distribution coefficient (P) and the selectivity factors (S). The obtained results revealed the effect of PEI on the exchange properties of the resin. The pH range selected (6-8) permitted a good adherence of PEI onto the resin surface. The quantity of the adsorbed PEI was increased by raising the initial concentration and the immersion period. The exchange capacity for copper ion passed from 2.6 mmol g⁻¹, in the case of unmodified resin, to 3.9 mmol g⁻¹ for the modified one.     

正己烷在Pt-Ce促进的氧化硅担载的杂多酸金属氧酸盐上的异构化

制备了用于正己烷临氢异构化的氧化硅担载的Keggin型杂多酸和还原态Pt-Ce氧化物催化剂.这些混合氧化物催化剂或单独使用,或与氧化硅担载的杂多酸催化剂一起使用.用X射线衍射、傅里叶变换红外光谱、傅里叶变换拉曼光谱、热重和N2物理吸附等方法表征在氧化、还原态和催化实验后的催化剂状态.本文的目的是在最佳反应条件(反应温度、还原温度和流量等)下,筛选出具有最好异构化收率的催化剂.结果表明,还原氧化物的存在不但有利于消除积炭,而且在反应期间能有效地维持氧化硅担载杂多酸的结构.从这些催化剂样品中,可以找到具有更好异构化活性和选择性的催化剂.