A Movable-Cavity Cold Atom Space Clock

We present an experimental scheme of a cold atom space clock with a movable cavity. By using a single microwave cavity, we find that the clock has a significant advantage, i.e. the longitudinal cavity phase shift is eliminated. A theoretical analysis has been carried out in terms of the relation between the atomic transition probability and the velocity of the moving cavity by taking into account the velocity distribution of cold atoms. The requirements for the microwave power and its stability for atomic π/2 excitation at different moving velocities of the cavity lead to the determination of the proper working parameters of the rubidium clock in frequency accuracy 10^-17. Finally, the mechanical stability for the scheme is analysed and the ways of solving the possible mechanical instability of the device are proposed.     

Quantitative evaluation of equatorial small-angle X-ray scattering for cylindrical fibers

Elongated microvoids, internal fibrillar structure, and edge scattering from both surface refraction cause an equatorial streak in small angle X-ray scattering. A model for analyzing the edge scattering of fibers is proposed. Simulation results indicate that the intensity of edge scattering from surface refraction of a cylindrical fiber is strong and makes an important contribution to the equatorial streak. Two factors influence edge scattering intensity. One is the sample-to-detector distance (D); edge scattering intensity increases with increasing D. The equatorial streak becomes weak when D is shortened. The other factor is the refraction index. Edge scattering intensity increases as the real component of the refraction index decreases. In experiment, weak or even no equatorial streaks were found for samples measured in a roughly index-matching fluid. Edge scattering can be eliminated or weakened, and it can be calculated by comparing the intensities of a cylindrical fiber when it is measured in air and in index-matching fluid. The simulation data are basically in agreement with the experimental data.     

Hard X-ray optics simulation using the coherent mode decomposition of the Gaussian Schell model

The propagation of a hard X-ray beam from a partially coherent synchrotron source is simulated by using the novel method based on the coherent mode decomposition of Gaussian Schell model and wave-front propagation. We investigate how the coherency properties and intensity distributions of the beam are changed by propagation through optical elements. Here, we simulate and analyze the propagation of the partially coherent radiation trans- mitted through an ideal slit. We present the first simulations for focusing partially coherent synchrotron hard X-ray beams using this novel method. And when compared with the traditional method which assumes the source is a totally coherent point source or completely incoherent, this method is proved to be more reasonable and can also demonstrate the coherence properties of the focusing beam. We also simulate the Young’s double slit experiment and the simulated results validate the academic analysis.     

基于Kirkpatrick-Baez镜聚焦的X射线小角散射显微层析成像

X射线小角散射显微层析成像(SAXS-CT)是一种无损的结构表征技术,用于研究非均匀物质纳米结构信息及其空间分布;在上海同步辐射光源(SSRF)设计并搭建了基于Kirkpatrick-Baez(KB)镜聚焦的SAXS-CT成像系统,并选取毛竹和注塑聚乳酸样品进行实验验证。结果表明:该SAXS-CT成像系统的聚焦光斑尺寸可以达到20μm以下;对于毛竹样品,得到了其内部维管束和薄壁细胞的位置分布及散射差异,同时获取了内部纳米纤维的取向特点;对于注塑聚乳酸样品,发现其内部片晶结构具有分层分布特征,获取了片晶结构的分布图像以及长周期分布图像;实验结果验证了该SAXS-CT成像系统的可靠性及实用性。     

In-situ study of precipitates in Al–Zn–Mg–Cu alloys using anomalous small-angle x-ray scattering

In the present work,the precipitate compositions and precipitate amounts of these elements(including the size distribution,volume fraction,and inter-precipitate distance) on the Cu-containing 7000 series aluminum alloys(7150 and 7085 Al alloys),are investigated by anomalous small-angle x-ray scattering(ASAXS) at various energies.The scattering intensity of 7150 alloy with T6 aging treatment decreases as the incident x-ray energy approaches the Zn absorption edge from the lower energy side,while scattering intensity does not show a noticeable energy dependence near the Cu absorption edge.Similar results are observed in the 7085 alloy in an aging process(120℃) by employing in-situ ASAXS measurements,indicating that the precipitate compositions should include Zn element and should not be strongly related to Cu element at the early stage after 10 min.In the aging process,the precipitate particles with an initial average size of ~ 8 ?A increase with aging time at an energy of 9.60 ke V,while the increase with a slower rate is observed at an energy of 9.65 ke V as near the Zn absorption edge.     

上海光源硬X射线相干衍射成像实验方法初探

相干X射线衍射成像方法是一种先进的成像技术,分辨率可达纳米量级.国际上大多数的同步辐射装置和自由电子激光装置都建立了该成像方法,并有将其作为主要成像技术的趋势.上海光源作为目前国内唯一的一台第三代同步辐射光源,尚未建立基于硬X射线的相干衍射成像实验平台.随着一批以波荡器为光源的光束线站投入使用,使得该方法的建立成为了可能.本文基于上海光源BL19U2生物小角散射线站,通过有效的光路设计,搭建了相干衍射实验平台,在12 keV和13.5 keV能量点均获得了硬X射线相干光束,并基于小孔衍射测量了入射光束的空间相干长度.该平台支持常规和扫描相干衍射实验模式,对小孔衍射图样及波带片扫描衍射图样实现了正确的相位重建,证明了该平台初步具备开展硬X射线相干衍射成像实验的能力.硬X射线相干衍射成像实验平台为国内首次建立,将为国内该实验方法的发展和应用提供有效的软硬件支持.     

部分相干同步辐射照射下光栅分数塔尔博特效应

基于高斯谢尔光束的相干模式分解理论和波动光学,建立了部分相干同步辐射硬X射线光束通过光学器件的传播模型。模拟了微聚焦X射线光束照射下光栅的分数塔尔博特效应,得到了聚焦光束的光强分布和相干特性变化,并分析了散焦光束入射下的光栅自成像。然后通过模拟准直光束入射下的光栅塔尔博特效应,得到了不同传播距离处自成像条纹的变化情况,分析了影响光栅自成像条纹形状的因素。通过光栅衍射条纹测量同步辐射相干度,发现对矩形相位光栅来说,应该对衍射图样进行傅里叶分解,求出各级傅里叶系数随传播距离的变化曲线,从而得到入射光束相干特性。