High temperature stability of maghemite in partially oxidized basalt lava

Mössbauer spectroscopy of basalt lava samples, exhibiting reversible thermal magnetization (J_S-T) curves with Curie temperatures of about 580°C, has revealed considerable amounts of maghemite (γ-Fe₂O₃) in many samples. In view of the expected instability, of maghemite at temperatures above 350°C, this reversibility is rather surprising. Here we report Mössbauer studies on heated lava samples, showing high content of maghemite. The samples were kept at 600°C in oxidizing, reducing, and inactive atmospheres, respectively, for different lengths of time, and then analyzed with Mössbauer spectroscopy at room temperature. The Mössbauer spectra showed that maghemite is stable in the oxidizing atmosphere for at least several hours. In the inactive atmosphere a considerable amount of maghemite still exists after two hours heating. In the reducing atmosphere maghemite had transformed to magnetite after only 30 minutes.     

On Commutativity of Rings With Derivations

Let R be a ring and d : R → R a derivation of R. In the present paper we investigate commutativity of R satisfying any one of the properties (i)d([x,y]) = [x,y], (ii)d(x o y) = xoy, (iii)d(x) o d(y) = 0, or (iv)d(x) o d(y) = x o y, for all x, y in some apropriate subset of R.     

Microbial Transformation of Sesquiterpenes, (−)‐Ambrox® and (+)‐Sclareolide

The microbial transformation of (?)‐Ambrox^® ( 1 ), a perfumery sesquiterpene, by a number of fungi, by means of standard two‐stage‐fermentation technique, afforded ambrox‐1α‐ol ( 2 ), ambrox‐1α,11α‐diol ( 3 ), ambrox‐1α,6α‐diol ( 4 ), ambrox‐1α,6α,11α‐triol ( 5 ), ambrox‐3‐one ( 6 ), ambrox‐3β‐ol ( 7 ), ambrox‐3β,6β‐diol ( 8 ), 13,14,15,16‐tetranorlabdane‐3,8,12‐triol ( 9 ), and sclareolide ( 10 ) (Schemes 1 and 2). Further incubation of compound 10 with Cunninghamella elegans afforded 3‐oxosclareolide ( 11 ), 3β‐hydroxysclareolide ( 12 ), 2α‐hydroxysclareolide ( 13 ), 2α,3β‐dihydroxysclareolide ( 14 ), 1α,3β‐dihydroxysclareolide ( 15 ), and 3β‐hydroxy‐8‐episclareolide ( 16 ) (Scheme 3). Metabolites 2 – 5, 12, 13 , and 16 were found to be new compounds. The major transformations include a reaction path involving hydroxylation, ether‐bond cleavage and inversion of configuration. Metabolites 11 – 16 of sclareolide showed significant phytotoxicity (Table 1). The structures of the metabolites were characterized on the basis of spectroscopic techniques.     

Depolymerization Study of Pakistani Lignite Coal Influence of Pre‐treatments on Product Slate

Influence of pretreatments, i.e., demineralization and pre‐soaking in some solvents on the yields of liquefied products obtained from hydro‐depolymerization of Pakistani coal in a pool of hydrogen has been discussed. Results of hydrogenation experiments demonstrated that demineralizing the coal sample prior to liquefaction caused the yields to decrease compared with the virgin coal samples. The contribution of mineral matter of coal has been evaluated by comparing the yields of liquid products of virgin and leached samples. Increase in the yields obtained from the hydrogenation experiments of swollen coal samples was not satisfactorily significant.     

Film formation from pure and mixed latices; transient fluorescence study

A fast transient fluorescence technique was used to study latex film formation induced by organic solvent vapor. Mixtures of pyrene (P)- and naphthalene (N)-labeled and/or pure naphthalene-labeled latex films were prepared separately from poly(methyl methacrylate) (PMMA) particles. Then these pure and mixed latex films were exposed to vapor of various chloroform-heptane mixtures in seven different experiments. In both films, fluorescence lifetimes from N were monitored during vapor-induced film formation. It was observed that N lifetimes decreased as the vapor exposure time is increased. A Stern-Volmer kinetic analysis was used for low quenching efficiencies to interpret the decrease in N lifetimes. A Prager-Tirrell model was employed to obtain back-and-forth frequencies, nu, of reptating PMMA chains during latex film formation induced by solvent vapor. In both pure and mixed latex films, nu values were found to be correlated with the chloroform content in the vapor mixture. It was observed that polymer interdiffusion obeyed a t1/2 law during film formation.     

Preparation and Properties of Aramid-Silica Hybrids with Inter-Phase Bonding Through (3-glycidoxypropyl)-trimethoxysilane

Nano-composites from aramid-silica system have been prepared via sol-gel process. Poly (phenyleneterephthalamide) copolymer chains were prepared by reacting a mixture of p- and m-phenylenediamines with terephthaloyl chloride in dimethylacetamide used as solvent. The sol-gel process in the polymer matrix was carried out through hydrolysis and condensation of a mixture of tetraethoxysilane and (3-glycidoxypropyl) trimethoxysilane. The latter was used to develop linkage, on one hand with silica network structure using alkoxy groups and on the other hand with aramid chains at its secondary amine groups through glycidal groups of silane. Mutual interaction between the two disparate phases aramid and silica network was thus created. Thin films of the composites containing different proportions of silica ranging from 5.0 to 25.0-wt% were cast by the solvent elution technique. The α-relaxation temperature associated with the glass transition was measured by the dynamic mechanical thermal analysis. The results showed an increase in the glass transition temperature from 328°C for the pure aramid to 352°C for the hybrid materials containing 25-wt% silica, an indicative of the increased interfacial interaction between the two phases. Films having relatively low silica content were flexible and transparent, but those with high silica content were opaque and brittle. These films were tested for their tensile strength, modulus and toughness. The mechanical strength of the composites as compared to the pure aramid increased initially but with further addition of silica the strength decreased. The initial increase can be explained due to increased interfacial interaction between the two phases, however agglomeration of silica particles was responsible for decreasing strength at higher silica contents.     

Metal organic chemical vapour deposition (MOCVD) of bone mineral like carbonated hydroxyapatite coatings

For the first time, the MOCVD technique has been used to deposit carbonated hydroxyapatite onto Ti6AL4V substrates using volatile monomeric (liquid) complexes [Ca(beta-diketonate)(2)(L)] and P(OEt)(3).     

Tests for liquid chromatographs

Summary The paper describes tests for liquid chromatographs to assess the autosampler and pump flow rate precision; suitability of the instrument for normal phase chromatography; UV detector performance; and external band broadening characteristics. Tests for mixing and proportioning characteristics of solvent pumps and performance of diode array detectors are also considered. These tests are designed to evaluate the performance of both newly released liquid chromatography equipment and equipment already in operation. Data from evaluations carried out by instrument manufacturer’s and suppliers is reported and discussed. This data offers specifications to a common format for initial selection of instruments prior to purchase.