Coupling between polymer adsorption and colloidal particle aggregation

Studies of the adsorption of high molecular weight polymers on colloidal latex and silica particles and their subsequent flocculation were carried out. Neutral polyethylene oxide samples with both a narrow and a broad molecular weight distribution were used together with low charged cationic copolymers. The influence of the particle concentration and polymer dose on the flocculation were systematically investigated under quiescent conditions.Equilibrium bridging only occurred with polyelectrolyte, even in very dilute suspensions, at high particle coverage. In contrast to this, non-equilibrium bridging occurred with both neutral polymer and polyelectrolytes but only for more concentrated suspensions and small amounts of adsorbed polymer. Polymer adsorption in dilute suspensions, which did not show particle aggregation was measured an electrophoretic technique. In more concentrated suspensions, where flocculation takes place, we found that aggregation prevents further polymer adsorption and induces both an excluded volume and a surface effect. The consequences on the shape of the isotherms differ according to the aggregation mechanism.A significant decrease of the amount, , of adsorbed polymer is observed with non-equilibrium bridging. When both mechanisms simultaneously contribute to the aggregation, the value of depends on their relative importance. In the intermediate range of copolymer dose their respective contributions are critically sensitive to the details of the mixing step and stirring, leading to non reproducible experimental results.     

Thermal behaviour of the homopolynuclear glyoxylate complex combinations with Cu(II) and Cr(III)

Homopolynuclear complexes of Cu(II) respectively Cr(III) with the glyoxylate dianion, C₂H₂O₄ ^2-, have been studied in non-isothermal regime in air and nitrogen. The results of the non-isothermal analysis performed for the synthesised complexes, Cu(C₂H₂O₄)·0.5H₂O, respectively [Cr₂(OH)₂(C₂H₂O₄)₂(OH₂)₄]·2H₂O, correlated with the results of the IR and TG analysis of the compounds obtained by thermal treatment from the initial complexes and the results of the GLC and XR analysis have led to the establishment of the thermal decomposition mechanisms for the two studied complexes. The decomposition mechanisms confirm the stoichiometric and structural formulae proposed for the two synthesised homopolynuclear complexes. This revised version was published online in July 2006 with corrections to the Cover Date.     

Improved sample preparation method for environmental plutonium analysis by ICP-SFMS and alpha-spectrometry

A rapid and simple sample preparation method for plutonium determination in environmental samples by inductively coupled plasma sector field mass spectrometry (ICP-SFMS) and alpha-spectrometry is described. The developed procedure involves a selective CaF₂ co-precipitation for preconcentration followed by extraction chromatographic separation. The proposed method effectively eliminates the possible interferences in mass spectrometric analysis and also removes interfering radionuclides that may disturb alpha-spectrometric measurement. For ²³⁹Pu, ²⁴⁰Pu and ²⁴¹Pu limits of detection of 9.0 fg·g⁻¹ (0.021 mBq), 1.7 fg·g⁻¹ (0.014 mBq) and 3.1 fg·g⁻¹ (11.9 mBq) were achieved by ICP-SFMS, respectively, and 0.02 mBq by alpha-spectrometry. Results of certified reference materials agreed well with the recommended values.     

A dynamic supramolecular system exhibiting substrate selectivity in the catalytic epoxidation of olefins

A dynamic supramolecular system involving hydrogen bonding between a Mn(III) salen catalyst and a Zn(II) porphyrin receptor exhibits selectivity for pyridine appended cis-beta-substituted styrene derivatives over phenyl appended derivatives in a catalytic epoxidation reaction.     

Dexamethasone delivery to posterior segment of the eye

Due to anatomic barriers and lacrimal drainage it is difficult to obtain therapeutic drug concentrations in the posterior part of the eye after topical drug administrations. Lipophilic cyclodextrins, such as randomly methylated β-cyclodextrin (RMβCD), are known to act both as solubilizers of water-insoluble drugs in aqueous solutions and as penetration enhancers that reduce the barrier function of lipophilic membranes. The purpose of this study was to investigate the effects of RMβCD on dexamethasone delivery from aqueous eye drop solution into rabbit eyes. Dexamethasone (0.5 and 1.5% w/v) drops (50 μl) were administered to the left eye of rabbits (n = 6) and the drug levels measured in different eye tissues 2 h after administration. In aqueous humor dexamethasone levels were 1,190 ± 110 and 1,670 ± 630 ng/g (mean ± SD) after administration of the 0.5 and 1.5% dexamethasone eye drops, respectively. In the retina the levels were 33 ± 7 and 66 ± 49 ng/g, and in optic nerve 41 ± 12 and 130 ± 50 ng/g, respectively. In a previous study the dexamethasone concentration in aqueous humor after topical administration of 1.3% (w/v) dexamethasone eye drops in aqueous 2-hydroxypropyl-β-cyclodextrin (HPβCD) solution was determined to be 320 ± 230 ng/g and 66 ± 20 ng/g after administration of Maxidex^® eye drops. Both the hydrophilic HPβCD and the lipophilic RMβCD enhance topical dexamethasone delivery into the eye, but of the two, the lipophilic RMβCD results in higher dexamethasone concentrations.     

Novel separation method for highly sensitive speciation of cancerostatic platinum compounds by HPLC–ICP–MS

A high-performance liquid chromatography–inductively coupled plasma mass spectrometry (HPLC–ICP–MS) method is presented for analysis of cisplatin, monoaquacisplatin, diaquacisplatin, carboplatin, and oxaliplatin in biological and environmental samples. Chromatographic separation was achieved on pentafluorophenylpropyl-functionalized silica gel. For cisplatin, carboplatin, and oxaliplatin limits of detection of 0.09, 0.10, and 0.15 g L^–1, respectively, were calculated at m/z 194, using aqueous standard solutions. (3 L injection volume). The method was utilized for model experiments studying the stability of carboplatin and oxaliplatin at different chloride concentrations simulating wastewater and surface water conditions. It was found that a high fraction of carboplatin is stable in ultrapure water and in solutions containing 1.5 mol L^–1 Cl^–, whereas oxaliplatin degradation was increased by increasing the chloride concentration. In order to support the assessment of oxaliplatin eco-toxicology, the method was tested for speciation of patient urine. The urine sample contained more than 17 different reaction products, which demonstrates the extensive biotransformation of the compound. In a second step of the study the method was successfully evaluated for monitoring cancerostatic platinum compounds in hospital waste water.     

Synthesis and characterization of emulsifier-free quaternarized vinylbenzylchloride latexes

Polycationic polymers have been obtained through a two-step procedure. First, poly-vinylbenzylchloride [P(VBC)] latexes were prepared under emulsifier-free conditions using a cationic initiator: 2,2-azobis(2-amidinopropane) hydrochloride; then the resulting latexes were reacted with trimethylamine. Particular attention was paid to side reactions occurring during the hydrolysis of the chloromethyl groups and the crosslinking reaction due to a transfer reaction onto polymer. The influence of various parameters on the particle size and structure of latexes as well as secondary reactions were investigated through a careful characterization.     

Synthesis and Structure Determination of SCM-15: A 3D Large Pore Zeolite with Interconnected Straight 12×12×10-Ring Channels

A new germanosilicate zeolite named SCM-15 (Sinopec Composite Material No. 15), the first zeolite containing a 3-dimensional (3D) channel system with interconnected 12-, 12-, and 10-ring channels (pore sizes: 6.1×7.2, 6.1×7.4, and 5.2×5.9 Å), has been synthesized using neutral 4-pyrrolidinopyridine as organic structure-directing agents (OSDAs). Its structure has been determined by combining single-crystal electron diffraction (SCED) and synchrotron powder X-ray diffraction (SPXD) data. The unique open framework structure of SCM-15 is related to that of FOS-5 ( BEC ), ITQ-7 ( ISV ), PKU-16 ( POS ), ITQ-26 ( IWS ), ITQ-21, Beta polymorph B, and SU-78B, since all these framework structures can be constructed from similar chains which are connected through shared 4-ring or double 4-ring (d4r) units. Based on this relation, six topologically reasonable 3D large or extra-large pore hypothetical zeolites are predicted.     

Angiotensin converting enzyme inhibitors/cyclodextrin inclusion complexes: solution and solid-state characterizations and their thermal stability

Angiotensin converting enzyme (ACE) inhibitors have recently gained attention as a new class of drug in the therapeutic management of glaucoma. However, the application of eye drops is limited because of their chemical instability in aqueous solutions. To overcome such a problem, cyclodextrins (CDs) were introduced to form inclusion complexes. Three ACE inhibitors, namely, captopril, quinapril and fosinopril (FOS), were chosen and the effect of CDs on their thermal stability in aqueous solutions was investigated. All three drugs formed inclusion complexes of 1:1 stoichiometry with all three natural CDs and the FOS/γCD inclusion complex possessed the highest stability constant, resulting in thermal stability enhancement. Furthermore, the addition of antioxidants could greatly enhance the thermal stability of FOS in the presence of γCD in aqueous solutions. The inclusion complex formation of FOS/γCD was further examined by computational and experimental characterizations. All these characterization results confirmed that FOS and γCD formed a true inclusion complex that provided drug stabilization in the aqueous eye drop medium.

     

Traveling salesman games

In this paper we discuss the problem of how to divide the total cost of a round trip along several institutes among the institutes visited. We introduce two types of cooperative games—fixed-route traveling salesman games and traveling salesman games—as a tool to attack this problem. Under very mild conditions we prove that fixed-route traveling salesman games have non-empty cores if the fixed route is a solution of the classical traveling salesman problem. Core elements provide us with fair cost allocations. A traveling salesman game may have an empty core, even if the cost matrix satisfies the triangle inequality. In this paper we introduce a class of matrices defining TS-games with non-empty cores.