Analysis of the manufacturing lead time in a production system with non-renewal batch input,threshold policy and post-operation

In this paper, we analyze the manufacturing lead time in a production system with BMAP (Batch Markovian Arrival process) input and post-operation operated under the N-policy. We use the factorization principle to derive the waiting time distribution (hence the manufacturing lead time) and the mean performance measures. A numerical example is provided.     

Structure and reflective properties of Al-Cu-Fe quasicrystalline thin film prepared by laser induced arc method

Al-Cu-Fe thin films were prepared by laser induced arc (laser-arc) method from a single source—Al₆₃Cu₂₅Fe₁₂ alloy, which was proved to consist of quasicrystalline phase together with approximant phase. The composition of the deposited films meets the requirement for formation of icosahedral symmetry phase. Quasicrystalline phase was obtained after annealing the amorphous as-deposit film samples. The optical properties of the samples were investigated. Thin film samples of Al, Cu and Fe deposited under the same condition were employed for comparison. The results showed specific reflective properties of Al-Cu-Fe quasicrystal thin film in some wavelength range. The optical conductivity of the films exhibited a negative peak, centered about 440 nm in range of 190 to 800 nm. The Al-Cu-Fe quasicrystal thin films could absorb almost all the ray in the wavelength range from 420nm to 450 nm. The ratio of absorption was greater than 99%.     

Correlation between Al2O3 particles and interface of Al-Al2O3 coatings by cold spray

Al-Al₂O₃ composite coatings with different Al₂O₃ particle shapes were prepared on Si and Al substrate by cold spray. The powder compositions of metal (Al) and ceramic (Al₂O₃) having different sizes and agglomerations were varied into ratios of 10:1 wt% and 1:1 wt%. Al₂O₃ particles were successfully incorporated into the soft metal matrix of Al. It was found that crater formation between the coatings and substrate, which is typical characteristic signature of cold spray could be affected by initial starting Al₂O₃ particles. In addition, when the large hard particles of fused Al₂O₃ were employed, the deep and big craters were generated at the interface between coatings and hard substrates. In the case of pure soft metal coating such as Al on hard substrate, it is very hard to get proper adhesion due to lack of crater formation. Therefore, the composite coating would have certain advantages.     

A short synthesis of 4-amino-3-hydroxybutyric acid (GABOB) via allyl cyanide

4-Amino-3-hydroxybutyric acid was synthesized from allyl cyanide in four steps in an overall yield of 38%. Ultrasonically promoted epoxidation of allyl cyanide with m-chloroperoxybenzoic acid giving oxiranylacetonitrile was used as a key step.     

Nanocrystal induced organization of a langmuir phospholipid monolayer

The influence of crystal surface charge on the thermodynamic and structural behavior of phospholipid monolayers has been investigated. We present how charged nanocrystals in the vicinity of an inherently nonordered lipid membrane provoke strong effects on the molecular arrangement within the monolayer. Apart from the induction of phase shifts and nucleation processes, the molecules were forced to adopt an ordered phase. A very recently developed X-ray scattering method is used for the first time to replace time-consuming specular reflectivity measurements. We conclude on the potential effects of crystal surface charge on cellular membranes.     

A convergent approach to huperzine A and analogues

We describe a concise and convergent synthesis of (rac)-5-methoxy-6-azatricyclco[7.3.1.0(2,7)]trideca-2(7),3,5,11-tetraen-13-ol, which has the basic ring system of huperzine A, a potent inhibitor of acetylcholinesterase. We also describe the synthesis of the novel system 5-methoxy-6-azatricyclo[7.2.2.0(2,7)]trideca-2(7),3,5-trien-10-one and a series of related systems.     

Colloidal lithographic nanopatterning via reactive ion etching

We report here a novel colloidal lithographic approach to the fabrication of nonspherical colloidal particle arrays with a long-range order by selective reactive ion etching (RIE) of multilayered spherical colloidal particles. First, layered colloidal crystals with different crystal structures (or orientations) were self-organized onto substrates. Then, during the RIE, the upper layer in the colloidal multilayer acted as a mask for the lower layer and the resulting anisotropic etching created nonspherical particle arrays and new patterns. The new patterns have shapes that are different from the original as a result of the relative shadowing of the RIE process by the top layer and the lower layers. The shape and size of the particles and patterns were dependent on the crystal orientation relative to the etchant flow, the number of colloidal layers, and the RIE conditions. The various colloidal patterns can be used as masks for two-dimensional (2-D) nanopatterns. In addition, the resulting nonspherical particles can be used as novel building blocks for colloidal photonic crystals.     

High levels of soluble herpes virus entry mediator in sera of patients with allergic and autoimmune diseases

Herpes virus entry mediator (HVEM) is a newly discovered member of the tumor necrosis factor receptor (TNFR) superfamily that has a role in herpes simplex virus entry, in T cell activation and in tumor immunity. We generated mAb against HVEM and detected soluble HVEM (SHVEM) in the sera of patients with various autoimmune diseases. HVEM was constitutively expressed on CD4(+) and CD8(+) T cells, CD19(+) B cells, CD14(+) monocytes, neutrophils and dendritic cells. In three-way MLR, mAb 122 and 139 were agonists and mAb 108 had blocking activity. An ELISA was developed to detect sHVEM in patient sera. sHVEM levels were elevated in sera of patients with allergic asthma, atopic dermatitis and rheumatoid arthritis. The mAbs discussed here may be useful for studies of the role of HVEM in immune responses. Detection of soluble HVEM might have diagnostic and prognostic value in certain immunological disorders.     

A serpentine laminating micromixer combining splitting/recombination and advection

Mixing enhancement has drawn great attention from designers of micromixers, since the flow in a microchannel is usually characterized by a low Reynolds number (Re) which makes the mixing quite a difficult task to accomplish. In this paper, a novel integrated efficient micromixer named serpentine laminating micromixer (SLM) has been designed, simulated, fabricated and fully characterized. In the SLM, a high level of efficient mixing can be achieved by combining two general chaotic mixing mechanisms: splitting/recombination and chaotic advection. The splitting and recombination (in other terms, lamination) mechanism is obtained by the successive arrangement of "F"-shape mixing units in two layers. The advection is induced by the overall three-dimensional serpentine path of the microchannel. The SLM was realized by SU-8 photolithography, nickel electroplating, injection molding and thermal bonding. Mixing performance of the SLM was fully characterized numerically and experimentally. The numerical mixing simulations show that the advection acts favorably to realize the ideal vertical lamination of fluid flow. The mixing experiments based on an average mixing color intensity change of phenolphthalein show a high level of mixing performance was obtained with the SLM. Numerical and experimental results confirm that efficient mixing is successfully achieved from the SLM over the wide range of Re. Due to the simple and mass producible geometry of the efficient micromixer, SLM proposed in this study, the SLM can be easily applied to integrated microfluidic systems, such as micro-total-analysis-systems or lab-on-a-chip systems.     

Mechanism and nanosize products of the sol-gel reaction using diphenylsilanediol and 3-methacryloxypropyltrimethoxysilane as precursors

We use a first-principles calculation and small-angle neutron scattering (SANS) to investigate the mechanism and the nanosize products of the sol-gel reaction with diphenylsilanediol (DPD) and 3-methacryloxypropyltrimethoxysilane (MEMO) precursors in synthesizing a hybrid waveguide material. It is predicted that switching between a DPD hydroxyl and a MEMO methoxy with a reaction rate of 6.8 x 10(-6) s(-1) at 300 K is the fastest process for the first reaction step, thus generating diphenylmethoxysilanol (DPM) and 3-methacryloxypropyldimethoxysilanol (MEDO) as products. However, we determine that this reaction pathway could be modified by the presence of the H2O released from a catalyst such as Ba(OH)2.H2O. Next, switching between the DPM hydroxyl and the MEDO methoxy is followed to generate diphenyldimethoxysilane (DPDM) and 3-methacryloxypropylmethoxysilanediol (MEMDO). However, condensation between a MEMDO hydroxyl and a DPDM methoxy is found to be most favorable for the third reaction step, which generates the DPDM-MEMDO dimer and CH3OH molecule as products. In a similar fashion, a DPDM methoxy of the DPDM-MEMDO dimer can condense with a MEMDO hydroxyl of the second DPDM-MEMDO dimer to increase the chain, but its reaction rate of 2.8 x 10(-11) s(-1) is predicted to be about 5 times smaller than that between a DPDM methoxy and a MEMDO hydroxyl. This implies that the reaction rate for the larger nanostructures becomes smaller. Additionally, our SANS measurements determine that the final products from our sol-gel reaction are on the nanometer scale, at sizes from 1.76 to 2.36 nm.