Thermally Crosslinkable and Chemically Modifiable Aromatic Polyesters Possessing Pendant Propargyloxy Groups

New aromatic (co)polyesters containing pendant propargyloxy groups were synthesized by phase transfer‐catalyzed interfacial polycondensation of 5‐(propargyloxy)isophthaloyl chloride (P‐IPC) and various compositions of P‐IPC and isophthaloyl chloride with bisphenol A. FTIR and NMR spectroscopic data, respectively, revealed successful incorporation of pendant propargyloxy groups into (co)polyesters and formation of (co)polyesters with desired compositions. (Co)polyesters exhibited good solubility in common organic solvents such as chloroform, dichloromethane, and tetrahydrofuran and could be cast into transparent, flexible, and tough films from chloroform solution. Inherent viscosities and number average molecular weights of (co)polyesters were in the range 0.77–1.33 dL/g and 43,600–118,000 g/mol, respectively, indicating the achievement of reasonably high‐molecular weights. The 10% weight loss temperatures of (co)polyesters were in the range 390–420 °C, demonstrating their good thermal stability. (Co)polyesters exhibited T_g in the range 146–170 °C and T_g values decreased with increase in mol % incorporation of P‐IPC. The study of non‐isothermal curing by DSC indicated thermal crosslinking of (co)polyesters via propargyloxy groups. The utility of pendant propargyloxy group was demonstrated by post‐modification of the selected copolyester with 1‐(4‐azidobutyl)pyrene, 9‐(azidomethyl)anthracene, and azido‐terminated poly(ethyleneglycol) monomethyl ether via copper(I)‐catalyzed Huisgen 1,3‐dipolar cycloaddition reaction. FTIR and ¹H NMR spectra confirmed that click reaction was quantitative. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 588–597     

Density dependence of electron mobility in dense gases

The density (N) dependence of electron mobility (μ) in various dense gases (H₂, N₂, O₂, CO₂ and rare gases) has been calculated using a multiple-scattering approach. Deviation of the high density gas from its perfect gas behaviour has been taken into account through the temperature-dependent second virial coefficient. Multiple scattering of electrons leads to shifts in their kinetic energy and it also changes their distribution functions. This unified approach predicts both positive and negative effects. The positive (negative) effect entails on increase (decrease) of μ withN. We have assessed the available data on momentum transfer cross-sections by comparing the mobility at very low densities (Nμ)₀ with experimental results. The density dependence is studied by comparing the calculated ratioNμ)/Nμ)₀ with the observed values and other theoretical work. The Legler model which assumes a constant cross-section is inadequate for predicting the observed density dependence. We obtain good agreement with available experimental work for all the atomic and molecular species studied here.     

A comparative adsorption study with different industrial wastes as adsorbents for the removal of cationic dyes from water

Four adsorbents have been prepared from industrial wastes obtained from the steel and fertilizer industries and investigated for their utility to remove cationic dyes. Studies have shown that the adsorbents prepared from blast furnace sludge, dust, and slag have poor porosity and low surface area, resulting in very low efficiency for the adsorption of dyes. On the other hand, carbonaceous adsorbent prepared from carbon slurry waste obtained from the fertilizer industry was found to show good porosity and appreciable surface area and consequently adsorbs dyes to an appreciable extent. The adsorption of two cationic dyes, viz., rhodamine B and Bismark Brown R on carbonaceous adsorbent conforms to Langmuir equation, is a first-order process and pore diffusion controlled. As the adsorption of dyes investigated was appreciable on carbonaceous adsorbent, its efficiency was evaluated by comparing the results with those obtained on a standard activated charcoal sample. It was found that prepared carbonaceous adsorbent exhibits dye removal efficiency that is about 80-90% of that observed with standard activated charcoal samples. Thus, it can be fruitfully used for the removal of dyes and is a suitable alternative to standard activated charcoal in view of its cheaper cost.     

Cross-axis synchronous flow-through coil planet centrifuge (type XLL). I. Design of the apparatus and studies on retention of stationary phase

The fourth prototype holds a pair of column holders in the lateral position at 15 cm from the center of the rotary shaft horizontally mounted on the rotary frame at 7.6 cm from the central axis of the apparatus. Using short coils of 2.6 mm I.D. PTFE (polytetrafluoroethylene) tubing with 7.6 cm and 24 cm helical diameters, retention of the stationary phase was measured in ten pairs of two-phase solvent systems under various experimental conditions. Satisfactory retention was obtained by choosing proper combinations of three factors, i.e., the direction of planetary motion, head-tail elution mode, and inward-outward elution mode. The polar butanol solvent systems showed excellent retention from 65 to 80% in the 7.6 cm helical diameter left-handed coil.     

Improved cross-axis synchronous flow-through coil planet centrifuge for performing counter-current chromatography. II. Studies on retention of stationary phase in short coils and preparative separations in multilayer coils

Performance of the apparatus was evaluated in terms of stationary phase retention, partition efficiency and sample loading capacity. Preliminary studies with short coils revealed high retention of the stationary phase under a proper combination of the head-tail elution and planetary motion. Preparative capability of the apparatus was successfully demonstrated on efficient multigram separations of 2,4-dinitrophenyl amino acids, indole auxins, and bacitracin in a pair of large multilayer coils with a total capacity of 1.5 l.