Static Headspace GC/MS Method for Determination of Methanol and Ethanol Contents,as the Degradation Markers of Solid Insulation Systems of Power Transformers

Methanol in insulating oil has been proposed as a new marker for condition assessment of the solid insulation system of power transformers. In the current work, as a first step of using the new marker, an analytical static headspace gas chromatography/mass spectrometry method has been developed, optimized, and validated to measure methanol and ethanol contents in the insulating mineral oil. The analyzing setup consists of a 6890 N gas chromatograph equipped with a 5973 network mass spectrometer (MS) in the absence of a costly headspace autosampler, and the chromatography separation was performed on a 60 m × 320 µm × 0.5 µm VF-WAXms GC column. Calibration curves have been provided using several concentrations of the alcohols, and also limit of detection (LOD), limit of quantification (LOQ), and relative standard deviation percentage (RSD%) have been determined.     

Abelian Lie symmetry algebras of two-dimensional quasilinear evolution equations

We carry out the classification of abelian Lie symmetry algebras of two-dimensional second-order nondegenerate quasilinear evolution equations. It is shown that such an equation is linearizable if it admits an abelian Lie symmetry algebra that is of dimension greater than or equal to 5 or of dimension greater than or equal to 3 with rank-one.     

Symmetry analysis of the charged squashed Kaluza–Klein black hole metric

In this research article, a complete analysis of symmetries and conservation laws for the charged squashed Kaluza–Klein black hole space‐time in a Riemannian space is discussed. First, a comprehensive group analysis of the underlying space‐time metric using Lie point symmetries is presented, and then the n‐dimensional optimal system of this space‐time metric, for n = 1,…,4, are computed. It is shown that there is no any n‐dimensional optimal system of Lie symmetry subalgebra associated to the system of geodesic for n≥5. Then the point symmetries of the one‐parameter Lie groups of transformations that leave invariant the action integral corresponding to the Lagrangian that means Noether symmetries are found, and then the conservation laws associated to the system of geodesic equations are calculated via Noether's theorem. Copyright © 2015 John Wiley & Sons, Ltd.     

Static and Ultrasonic‐assisted Aging Effects on the Synthesis of Analcime Zeolite

The synthesis of zeolite ANA under static hydrothermal conditions was performed accompanied by an additional static and ultrasonic‐assisted aging of the reaction mixture prior to crystallization. The aging process was compared with stirring‐assisted aging, microwave‐assisted aging and syntheses without any aging. The influence of aging time on the crystallization time of zeolite ANA was investigated. The static and ultrasonic‐assisted aging can shorten the crystallization time of the ANA phase. Moreover, ultrasonic‐assisted aging leads to altered morphologies of the particles. The products were characterized by X‐ray diffraction (XRD) and scanning electron microscopy (SEM).     

Comparison of the performance of different hybrid catalysts for direct synthesis of dimethyl ether from synthesis gas

Nine hybrid catalysts have been prepared, characterized and tested in a micro reactor for the direct synthesis of dimethyl ether. The physical mixtures of H-MFI-90 with ICI or KMT catalysts showed better performance.     

One‐Pot Synthesis of Sulfonamides and Sulfonyl Azides from Thiols using Chloramine‐T

A convenient synthesis of sulfonamides and sulfonyl azides from thiols is described. In situ preparation of sulfonyl chlorides from thiols was accomplished by oxidation with chloramine‐T (=N‐chlorotosylamide=N‐chloro‐4‐methylbenzenesulfonamide), tetrabutylammonium chloride (Bu₄NCl), and H₂O. The sulfonyl chlorides were then further allowed to react with excess amine or NaN₃ in the same pot.     

Improving the Morphological Parameters of Aluminum Foam for Maximum Sound Absorption Coefficient using Genetic Algorithm

Fabricating of metal foams with desired morphological parameters including pore size, porosity and pore opening is possible now using sintering technology. Thus, if it is possible to determine the morphology of metal foam to absorb sound at a given frequency, and then fabricate it through sintering, it is expected to have optimized metal foams for the best sound absorption. Theoretical sound absorption models such as Lu model describe the relationship between morphological parameters and the sound absorption coefficient. In this study, the Lu model was used to optimize the morphological parameters of Aluminum metal foam for the best sound absorption coefficient. For this purpose, the Lu model was numerically solved using written codes in MATLAB software. After validating the proposed codes with benchmark data, the genetic algorithm (GA) was applied to optimize the affecting morphological parameters on the sound absorption coefficient. The optimization was carried out for the thicknesses of 5 mm to 40 mm at the sound frequency range of 250 Hz–8000 Hz. The optimized parameters ranged from 50% to 95% for porosity, 0.1 mm to 4.5 mm for pore size, and 0.07 mm to 0.6 mm for pore opening size. The result of this study was applied to fabricate the desired Aluminum metal foams for the best sound absorption. The novel approach applied in this study, is expected to be successfully applied in for best sound absorption in desired frequencies.     

Combination of steepest descent and BFGS methods for nonconvex nonsmooth optimization

In this paper, a method is developed for solving nonsmooth nonconvex minimization problems. This method extends the classical BFGS framework. First, we generalize the Wolfe conditions for locally Lipschitz functions and prove that this generalization is well defined. Then, a line search algorithm is presented to find a step length satisfying the generalized Wolfe conditions. Next, the Goldstein e-subgradient is approximated by an iterative method and a descent direction is computed using a positive definite matrix. This matrix is updated using the BFGS method. Finally, a minimization algorithm based on the BFGS method is described. The algorithm is implemented in MATLAB and numerical results using it are reported.     

Isomorphous Substitution of Iron and Nickel into Analcime Zeolite

Studies on the effects of iron and nickel incorporation into the hydrothermal synthesis of ANA zeolite were carried out. The presented work reveals that pure Fe‐Al analcime is synthesized by using starting composition with a higher iron(III) content than reported in previous publications. Furthermore, the iron(III) and nickel(II) contents play important roles in the framework of the synthesized zeolite. XRD, FT‐IR spectroscopy, diffuse reflectance UV/Vis spectroscopy, nitrogen adsorption and SEM were used to characterize the synthesized zeolites. These investigations showed that loading of iron and nickel ions in ANA zeolite changes the pore size and morphology of analcime zeolite.