Buffering effects on the solution behavior and hydrolytic degradation of poly(β-amino ester)s

With a vast, synthetically accessible compositional space and highly tunable hydrolysis rates, poly(β-amino ester)s (PBAEs) are an attractive degradable polymer platform. Leveraging PBAEs in a wide range of applications hinges on the ability to program degradation, which, thus far, has been frustrated by multiple confounding phenomena contributing to the degradation of these charged polyesters. Basic conditions accelerate hydrolysis, yet reduce solubility, limiting water access to amines and esters. Further, the high buffering capacity of PBAEs can render buffers ineffective at controlling solution pH. To unify understanding of PBAE degradation and solution properties, this study examines PBAE hydrolysis as a function of pH and buffer concentration as well as polymer hydrophobicity. At low buffer concentrations, the PBAE amines and the acid produced during hydrolysis control solution pH. Meanwhile, at high buffer concentrations that afford relatively constant pH, hydrolysis rate increases with pH, despite the reduced PBAE solubility. Increasing the hydrophobic content of PBAEs eventually hinders the capacity of the polymer to accept protons from solution, limiting the pH increase and slowing hydrolysis. These studies showcase the role of buffering on the pH-dependent degradation and solution properties of PBAEs, providing guidance for programming degradation in applications ranging from drug delivery to thermosets.     

Amphiphilic block copolymer self‐assemblies of poly(NVP)‐b‐poly(MDO‐co‐vinyl esters): Tunable dimensions and functionalities

Functional, degradable polymers were synthesized via the copolymerization of vinyl acetate (VAc) and 2‐methylene‐1,3‐dioxepane (MDO) using a macro‐xanthate CTA, poly(N‐vinylpyrrolidone), resulting in the formation of amphiphilic block copolymers of poly(NVP)‐b‐poly(MDO‐co‐VAc). The behavior of the block copolymers in water was investigated and resulted in the formation of self‐assembled nanoparticles containing a hydrophobic core and a hydrophilic corona. The size of the resultant nanoparticles was able to be tuned with variation of the hydrophilic and hydrophobic segments of the core and corona by changing the incorporation of the macro‐CTA as well as the monomer composition in the copolymers, as observed by Dynamic Light Scattering, Static Light Scattering, and Transmission Electron Microscopy analyses. The concept was further applied to a VAc derivative monomer, vinyl bromobutanoate, to incorporate further functionalities such as fluorescent dithiomaleimide groups throughout the polymer backbone using azidation and “click” chemistry as postpolymerization tools to create fluorescently labeled nanoparticles. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2699–2710     

Adhesive bonding of glassy polymer surfaces by an ultrathin layer of a semicrystalline polymer

To develop a greater understanding of interfacial interactions between a semicrystalline polymer and a glassy polymer, adhesion tests were performed on very thin layers of poly(ethylene oxide) (PEO) sandwiched between two layers of poly(tetramethyl bisphenol A polycarbonate) (TMPC). The tests were designed to provide intimate contact between the surfaces while they were heated above the melting point of the PEO and cooled back to room temperature. A contact mechanics approach, based on the Johnson, Kendall, and Roberts theory, was used to determine values of the energy release rate describing the energetic driving force for crack propagation within the interfacial region. The ability to measure crack propagation at large values of the energy release rate was limited by rupture of the silicone elastomer that was used to provide a sufficiently compliant matrix for the adhesion experiment. By cycling the tensile stress at relatively low loading levels, we were able to measure fatigue crack propagation at values of the energy release rate that did not result in failure of the elastomer. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3809–3821, 2004     

Rheological properties of binary associating polymers

Dynamics of associating polymer solutions above the reversible gelation point are studied. Each macromolecule consists of a soluble backbone (B) and a small fraction of specific strongly interacting groups (A or C stickers) attached to B. A mixture of B–A and B–C associating polymers with 1:1 stoichiometric ratio is considered. As a result of AC association, the polymers reversibly gelate above the overlap concentration. It is shown that (1) the network strands are linear complexes (double chains) of B–A and B–C; (2) “diffusion” of the network junction points is characterized by an apparent activation energy, which can be significantly higher than the energy of one AC bond; (3) most importantly, the randomness of sticker distribution along the chain can significantly slow down the network relaxation leading to a markedly non-Maxwellian viscoelastic behavior. The theory elucidates the most essential features of rheological behavior of polysaccharide associating systems (with A = adamantyl moiety, C = β-cyclodextrin, B = either chitosan or hyaluronan) including similar behavior of G ^′ and G ^″ in a wide frequency range, strong temperature dependence of the characteristic frequency ω _x , and an extremely strong effect of added free stickers (fC) on the dynamics. This paper was presented at Annual European Rheology Conference (AERC) held in Hersonisos, Crete, Greece, April 27–29, 2006.     

Intrinsic echolocation capability of Hector's dolphin, Cephalorhynchus hectori.

A sonar system's echolocation capabilities can be inferred from the ambiguity distribution (defined here in terms of the conventional signal response function) of each of its transmitted signals. Several records of sounds emitted by Hector's dolphin are analyzed. The computed ambiguity distributions indicate that the sonar clicks of Hector's dolphins should be capable of resolving the ranges of targets as close together as 2 cm apart, but that target velocities cannot be resolved to any useful degree from a single echo.     

Comparison of short range interactions in nematic liquid crystals A 2H-NMR study of 5CB-d19 as a solute

Previous studies using dideuterium as a solute have demonstrated the importance for orientation of the interaction between the solute molecular quadrupole moment and the average electric field gradient present in liquid crystals. With the aim of learning about additional orientational mechanisms, we have studied the temperature dependence of the ²H-NMR spectra of the liquid crystal 5CB-d₁₉ as the solute in three liquid crystal mixtures: 55 wt % 1132/EBBA, 56·5 wt % 1132/EBBA and 70 wt % 5CB/EBBA. In these mixtures, the contribution from the environment to the average electric field gradient at the ²H nucleus of dideuterium is zero. The spectra of 5CB-d₁₉ in the mixtures 55 wt % 1132/EBBA and 56·5 wt % 1132/EBBA are equivalent, but are different from those in 70 wt % 5CB/EBBA. The spectra of 5CB in 55 wt % 1132/EBBA and 70 wt % 5CB/EBBA are analysed using two different models for the short range potential, and param eters of the models are used to compare the potentials in the different mixtures. For a given spectral splitting of the chain C₁ deuteron, the reduced short range potential is the same in all three mixtures studied. The spectral differences observed are a consequence of different nematic-isotropic phase transition temperatures combined with the effect of trans/gauche-isomerization in the hydrocarbon chain.     

Speckle metrology employing LCTV spatial light modulators

Liquid crystal televisions have been employed as spatial light modulators in a variety of optical image processing applications. We have used such devices to develop techniques in speckle metrology for the electronic addition of speckle patterns and the display of speckle correlation, and also for the real-time display of object motion. Factors which affect the performance in terms of the useful working range and the accuracy of displacement measurement are discussed. Some modifications to the LCTV which should increase the potential of these devices as spatial light modulators, when used in both amplitude and phase modulation, are considered briefly.     

Facile syntheses of surface-functionalized micelles and shell cross-linked nanoparticles

Block copolymer micelles and shell cross-linked nanoparticles (SCKs) presenting Click-reactive functional groups on their surfaces were prepared using two separate synthetic strategies, each employing functionalized initiators for the controlled radical polymerization of acrylate and styrenic monomers to afford amphiphilic block copolymers bearing an alkynyl or azido group at the α-terminus. The first route for the synthesis of the azide-functionalized nanostructures was achieved via sequential nitroxide-mediated radical polymerization (NMP) of tert-butyl acrylate and styrene, originating from a benzylic chloride-functionalized initiator, followed by deprotection of the acrylic acids, supramolecular assembly of the block copolymer in water and conversion of the benzylic chloride to a benzylic azide. In contrast, the second strategy utilized an alkynyl-functionalized reversible addition fragmentation transfer (RAFT) agent directly for the RAFT-based sequential polymerization of tetrahydropyran acrylate and styrene, followed by selective cleavage of the tetrahydropyran esters to give the α-alkynyl-functionalized block copolymers. These Click-functionalized polymers, with the functionality located at the hydrophilic polymer termini, were then self-assembled using a mixed-micelle methodology to afford surface-functionalized “Clickable” micelles in aqueous solutions. The optimum degree of incorporation of the Click-functionalized polymers was investigated and determined to be ca. 25%, which allowed for the synthesis of well-defined surface-functionalized nanoparticles after cross-linking selectively throughout the shell layer using established amidation chemistry. Functionalization of the chain ends was shown to be an efficient process under standard Click conditions and the resulting functional groups revealed a more “solution-like” environment when compared to the functional group randomly inserted into the hydrophilic shell layer. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5203–5217, 2006