Temporal Instability of Acoustic Wave in a Semiconductor Plasma Medium under Momentum Mismatched Condition

Physics of the Solid State - Temporal instability of acoustic wave is investigated in an infinite semiconductor plasma using classical hydrodynamic approach. We consider a homogeneous semiconductor...     

Microstructure dependent dynamic fracture analyses of trabecular bone based on nascent bone atomistic simulations

Trabecular bone fracture is closely related to the trabecular architecture, microdamage accumulation, and bone tissue properties. Primary constituents of trabecular tissue are hydroxyapatite (HA) mineralized type-I collagen fibers. In this research, dynamic fracture in two dimensional (2-D) micrographs of ovine (sheep) trabecular bone is modeled using the mesoscale cohesive finite element method (CFEM). The bone tissue fracture properties are obtained based on the atomistic strength analyses of a type-I collagen + HA interfacial arrangement using molecular dynamics (MD). Analyses show that the presented framework is capable of analyzing the architecture dependent fracture in 2-D micrographs of trabecular bone.     

Wavelength-scanning Talbot effect and its application for arbitrary three-dimensional step-height measurement

We demonstrate the phenomenon of Talbot self-image plane shift by tuning the wavelength of the broadband light source. A superluminescent diode (SLD) is used as a broad-band light source and an acousto-optic tunable filter (AOTF) as wavelength-scanning device. A periodic grating is illuminated by the wavelength tuned light of SLD using AOTF and Talbot self-image plane is shifted continuously in the longitudinal direction without mechanically moving the grating. The wavelength-scanning Talbot effect is then implemented for the measurement of arbitrary step-height of discontinuous objects with extended range. The main advantages of the proposed system are non-mechanical scanning, high stability because of it’s common-path geometry and compactness. Since the measurement of the phase is not required the system is free from phase ambiguity problem and therefore, the range of measurement is large as compare to interferometric techniques.     

An efficient total synthesis of sulfobacin A

A short and efficient enantioselective synthesis of sulfobacin A has been achieved using the Sharpless asymmetric dihydroxylation and the regiospecific nucleophilic opening of a cyclic sulfate as the key steps.     

The Linear Rational Pseudospectral Method with Preassigned Poles

We present a linear rational pseudospectral (collocation) method with preassigned poles for solving boundary value problems. It consists in attaching poles to the trial polynomial so as to make it a rational interpolant. Its convergence is proved by transforming the problem into an associated boundary value problem. Numerical examples demonstrate that the rational pseudospectral method is often more efficient than the polynomial method.     

Differential pulse polarographic determination of trace amounts of vanadium and molybdenum in various standard alloys and environmental samples after preconcentration of their morpholine-4-carbodithioates on microcrystalline naphthalene or morpholine-4-dithiocarbamate cetyltrimethyl-ammonium bromide-naphthalene adsorbent

A highly selective, sensitive, and fairly rapid and economical differential pulse polarographic (DPP) method has been reported for the determination of trace amounts of vanadium and molybdenum in standard alloys and various environmental samples. The morpholine-4-carbodithioates of these metals were retained (>99% recovery) quantitatively on microcrystalline naphthalene in the pH range 4.5-6.9 for vanadium and 1.5-4.5 for molybdenum. These metals were determined by DPP after desorption with 10 ml of 1 M HCl. Vanadium and molybdenum may also be preconcentrated by passing their aqueous solutions under similar conditions on morpholine-4-dithiocarbamate CTMAB-naphthalene adsorbent packed in a column at a flow rate of 1-5 ml min(-1) and determined similarly. The detection limits are 0.20 ppm for vanadium and 0.04 ppm for molybdenum at minimum instrumental settings (signal to noise ratio=2). The linearity is maintained in the following concentration ranges, vanadium 0.50-10.0 and molybdenum 0.10-9.0 ppm, with a correlation factor of 0.9996 (confidence interval of 95%, slopes 0.0196 and 0.01497 muA mug(-1), intercepts 3.65x10(-3) and -1.92x10(-3) respectively) and relative standard deviation of 1.1% in the microcrystalline method, while in the column method, the linearity is maintained in the concentration ranges, 0.50-6.5 for vanadium and 0.10-5.5 ppm for molybdenum with correlation factor of 0.9994 (with confidence interval of 95%, slopes 0.0194, 0.015 muA mug(-1), intercepts 3.60x10(-3) and -1.90x10(-3) respectively) and relative standard deviation of 1.4%. Various parameters such as the effect of pH, reagent, naphthalene and CTMAB concentrations, volume of aqueous phase and interference of a large number of metal ions on the estimation of vanadium and molybdenum have been studied in detail to optimize the conditions for their voltammetric determination at trace level in various standard alloys and environmental samples.     

Synthesis of novel chiral spirodione, (6R,7R)-7-phenyl-1-oxaspiro[5.5]undec-3-ene-2,5-dione: application to the asymmetric Diels-Alder reaction with high π-facial selectivity

The synthesis of the title spirodione, a new class of auxiliary based chiral synthon using (−)-trans-2-phenylcyclohexanol and its application to the asymmetric Diels-Alder reaction are described. Methodology for detachment of the chiral auxiliary from the cycloadduct has been developed.     

Chemical modification of fluorinated self-assembled monolayer surfaces by low energy reactive ion bombardment

Reactive collisions of low energy (<100-eV) mass-selected ions are used to chemically modify fluorinated self-assembled monolayer surfaces comprised of alkanethiolate chains CF₃(CF₂)₁₁(CH₂)₂S— bound to Au. Typical experiments were done by using 1-nA/cm² beams and submonolayer doses of reactant ions. Characterization of the modified surface was achieved by in situ chemical sputtering (60-eV Xe^+·) and by independent high mass resolution time-of-flight-secondary ionization mass spectrometry (TOF-SIMS) (15–25-keV, Ga⁺) experiments. Treatment with Si³⁵C1 ₄ ^+· produced a surface from which Xe⁺ sputtering liberated CF₂ ³⁵C1⁺ ions, which suggested Cl-for-F halogen exchange at the surface. Isotopic labeling studies that used Si³⁵Cl₂ ³⁷Cl ₂ ^+· ; and experiments with bromine-containing and iodine-containing projectiles, confirmed this reaction. High mass resolution TOF-SIMS spectra, as well as high spatial resolution images, provided further evidence as to the existence of halogen-exchanged species at the bombarded surface. Analogous Cl-for-F halogen substitution was observed in a model gas-phase reaction. The ion-surface reaction is suggested to proceed through an intermediate fluoronium ion in which the projectile is bonded to the target molecule. The most significant conclusion of the study is that selective chemical modification of monolayer surfaces can be achieved by using reactive ion beams, which lead to new covalent bonds at the surface and in the scattered ions.     

Synthesis and structural characterisation of a novel tris-methylene bridged compound (NO) 4Fe2 Se(μ-CH2)3

The tris-methylene bridged compound (NO)₄Fe₂Se(μ-CH₂)₃ has been isolated. It has been characterised by IR and ¹H, ¹³C, and ⁷⁷Se NMR spectroscopy. Its structure has been determined by single-crystal X-ray diffraction methods. The structure consists of a heavy atom triangle consisting of one Se and two Fe atoms. The Fe-Fe and the two Fe-Se edges are bridged by methylene groups.