Silica-supported PtSn alloy doped with Ga, In or, Tl: Characterization and catalytic behaviour in n-hexane dehydrogenation

Silica-supported trimetallic catalysts containing Pt, Sn and a group 13 metal (PtSnM, M=Ga, In, Tl) were prepared by consecutive impregnation steps from cis-[PtCl₂(PPh₃)₂] and chloride precursors. X-ray diffraction (XRD), transmission electron microscopy (TEM), selected-area electron diffraction (ED) and energy dispersive X-ray analysis (EDX) showed large platelet-like particles of PtSn_1−xM_x phases. PtSnGa catalyst with a Pt/(Sn+Ga) molar ratio of 1.72 showed a bimodal particle distribution and a Pt phase was identified. Differences in surface structures were also revealed by the performance of catalysts in the dehydrogenation of n-hexane. For PtSnIn and PtSnTl (Pt/(Sn+M) molar ratio of about 1) the dehydrogenation was favoured. In contrast, PtSnGa catalyst yielded hydrogenolysis products. Photoelectron spectra showed the Pt 4f_7/2 level at a binding energy of 70.0–71.8 eV in all cases. Moreover, the FT-IR spectra of chemisorbed CO on the PtSnGa showed a slight shift in the ν(CO) toward higher values with respect to the monometallic catalyst, pointing to an electronic effect in accordance with photoelectron spectroscopy.     

Structural and morphological investigation of ceria-promoted Al(2)O(3) under severe reducing/oxidizing conditions

A series of CeO(2)/Al(2)O(3) samples with different ceria loadings in the range 0-25 wt % (0, 2, 5, 7.5, 15, and 25%) were prepared by incipient wetness and studied using several complementary techniques such as Brunauer-Emmett-Teller (BET), X-ray diffraction (XRD), temperature-programmed reduction (TPR), Raman, high-resolution transmission electron microscopy (HRTEM), and extended X-ray absorption fine structure (EXAFS). The aim of the investigation was to understand the behavior of ceria when deposited on alumina and treated under oxidizing and reducing conditions at high temperature (T >/= 1273 K). It is shown that ceria can partially stabilize alumina toward the formation of low-surface-area phases up to 1373 K under oxidizing conditions, while enhanced stabilization is observed under reducing conditions, being effective up to 1473 K. A detailed quantitative temperature-programmed reduction (TPR) analysis made at different loadings and calcination temperatures allowed us to identify three characteristic regions where the reduction of small and large ceria crystallites occurs with the formation of CeAlO(3) crystallites at high temperature. These are likely responsible for surface-area stabilization. For dispersed ceria samples, reduction takes place almost exclusively at low temperature (<700 K), while a shift to higher temperatures is observed upon increasing the ceria particle size. A fraction of Ce, in samples at low loadings, is stable in the lower oxidation state, even if subjected to strongly oxidizing conditions.     

Magnetic–fluorescent Langmuir–Blodgett films of fluorophore-labeled ferritin nanoparticles

We have covalently coupled fluorophore 4-(2-hydroxyethoxy)-7-nitro-2,1,3-benzoxadiazole (NBD) to the external ferritin shell through lysine residues. An increase in the luminescence quantum yield of the fluorescent ferritin particles and a blue shift in its emission peak compared to individual fluorophore were observed. The study of the particles by transmission electron microscopy showed that the native iron core ferritin is intact and that no degradation occurs during chemical functionalization of the protein shell. The NBD-labeled ferritin particles are water soluble, which allowed their controlled deposition by the Langmuir–Blodgett (LB) technique. Superparamagnetic and fluorescent properties of the particles are preserved within the LB film.     

Effect of interface fracture on the tensile deformation of fiber-reinforced elastomers

The influence of interface properties (strength and toughness) on the tensile behavior of fiber-reinforced elastomers deformed perpendicularly to the fibers was studied using computational micromechanics. Numerical simulations were performed by means of the finite element analysis of a representative volume element of the composite microstructure. The effect of finite deformations and of interface fracture was included in the simulations, the latter through a bidimensional and quadratic interface element inserted at the fiber/matrix interfaces. A parametrical study was carried out to assess the effect of interface strength and toughness on the tensile strength and damage micromechanisms. It was found that the onset of damage and tensile strength were controlled by interface strength while the evolution of damage depended on interface toughness.     

An eco-friendly tandem tosylation/Ferrier N-glycosylation of amines catalyzed by Er(OTf)3 in 2-MeTHF

Er(OTf)₃ in 2-MeTHF provides a new and eco-friendly process for Ferrier glycosylation of sulfonamides and amino acids with various N-nucleophiles.The stereoselective synthesis of 2,3-unsaturated-N-pseudoglycals was carried out with 3,4,6-tri-O-acetyl-d-glucal and different nucleophiles affording good results in a short time.     

A constrained egalitarian solution for convex multi-choice games

This paper deals with a constrained egalitarian solution for convex multi-choice games named the d value. It is proved that the d value of a convex multi-choice game belongs to the precore, Lorenz dominates each other element of the precore and possesses a population monotonicity property regarding players’ participation levels. Furthermore, an axiomatic characterization is given where a specific consistency property plays an important role.     

Equilibria in a competitive model arising from linear production situations with a common-pool resource

In this paper we deal with linear production situations in which there is a limited common-pool resource, managed by an external agent. The profit that a producer can attain depends on the amount of common-pool resource obtained through a certain procedure. We contemplate a competitive process among the producers and study the corresponding non-cooperative games, describing their (strict) Nash equilibria in pure strategies. It is shown that strict Nash equilibria form a subset of strong Nash equilibria, which in turn form a proper subset of Nash equilibria.     

Multiclass detection and quantitation of antibiotics and veterinary drugs in shrimps by fast liquid chromatography time-of-flight mass spectrometry

A fast liquid chromatography time-of-flight mass spectrometry (LC-TOFMS) method has been developed for simultaneous quantitative multiclass determination of residues of selected antibiotics and other veterinary drugs (benzalkonium chloride, ethoxyquin, leucomalachite green (LMG), malachite green (MG), mebendazole, sulfadiazine, sulfadimethoxine, sulfamethazine, sulfamethizole, sulfanilamide, sulfapyridine, sulfathiazole and trimethoprim) in shrimps. Different sample treatment methodologies were tested for the extraction of the targeted species based on either liquid partitioning with different solvents, solid-phase extraction or and matrix solid-phase dispersion. The final selected extraction method consisted of solid-liquid extraction protocol using acetonitrile as solvent followed by a clean-up step with primary secondary amine (QuEChERS). Recovery rates for the extraction of the selected multiclass chemicals were in the range 58-133%. Subsequent identification, confirmation and quantitation were carried out by LC-TOFMS analysis using a reverse-phase C₁₈ column with 1.8 μm particle size. The confirmation of the target species was based on accurate mass measurements of the protonated molecules ([M+H]⁺) and their fragment ions, obtaining routine accuracy errors lower than 2 ppm in most cases. The optimized LC-TOFMS method displayed excellent sensitivity for the studied analytes, with limits of detection (LODs) in the range 0.06-7 μg kg⁻¹. Finally, the proposed method was successfully applied to the analysis of 12 shrimp samples collected from different supermarkets, showing the potential applicability of the method for ultratrace detection of these chemicals in such complex matrix.     

Synthetic strategies for the surface functionalisation of gold nanoparticles with metals and metal clusters

The reaction of the new ditopic thiol-phosphine compound HS(CH(2))(11)OOCC(6)H(4)PPh(2) (L) with an excess of dodecanethiol-protected gold nanoparticles gave the asymmetric gold complex [CH(3)(CH(2))(11)SAuPPh(2)C(6)H(4)COO(CH(2))(11)SH] (4), but no phosphine-protected gold nanoparticles were formed. However, by blocking the phosphine function in L with metal fragments, we have been able to produce gold nanoparticles functionalised with AuCl- and cluster [Fe(2)(CO)(7)Au] units on the surface by the method of ligand-place exchange reaction.