A 24-GHz Patch Array with a Power Amplifier/Low-Noise Amplifier MMIC

This paper presents an active patch array designed at 24 GHz. It can be used as a front-end component for a phased array. A series resonant array structure is chosen which is compact and easy excite. With 5 elements, the array proved a 12-dB antenna gain. A power amplifier and a low noise amplifier are designed on a single GaAs chip (PALNA). Bias switch is used in the PALNA, which greatly reduces the switch loss in a transceiver and increases the efficiency. 20-dB small signal gain is achieved in both power amplifier and low noise amplifier. The active patch array is built by the combination of the patch array and PALNA. The measured active gain of this antenna is 35-dB for the PA mode and 31-dB for the LNA mode. This active patch array can obtain an EIRP of 34 dBm with a total radiated power of 22dBm and a maximum PAE of 32%. To check the noise performance, we applied sources at both normal temperature and 77K (liquid nitrogen) and extracted the noise figure (3.5 dB) of the active antenna by the Y factor method. The results proved that the active antenna is working efficiently as both a transmitting and receiving antenna.     

Study of the Retention Behavior of Newly Synthesized s-Triazine Derivatives in RP TLC Systems,and the Lipophilicity of the Compounds

JPC – Journal of Planar Chromatography – Modern TLC - The chromatographic behavior of nine newly synthesized s-tri-azines has been studied by thin-layer chromatography on C18/UV254...     

Solid-phase microextraction of hop volatiles. Potential use for determination and verification of hop varieties

The composition of hop essential oil is an important tool for evaluation of hop quality. As each hop variety has a typical essential oil pattern (fingerprint), hop oil analyses can be used to distinguish between hop varieties. The headspace solid-phase microextraction (SPME) method as described in this contribution is a simple sample preparation technique and represents an alternative procedure for essential oil fingerprint determination. Different SPME parameters (extraction temperature, extraction time and sample mass) were studied and the results were compared with those obtained by the routine distillation method. It is shown that SPME results can be used for determination and verification of varieties grown in Slovenia by means of principal components analysis.     

An anion-dependent switch in selectivity results from a change of C-H activation mechanism in the reaction of an imidazolium salt with IrH5(PPh3)2

Changing the counteranion along the series Br, BF4, PF6, SbF6 in their ion-paired 2-pyridylmethyl imidazolium salts causes the kinetic reaction products with IrH5(PPh3)2 to switch from chelating N-heterocyclic carbenes (NHCs) having normal C2 (N path) to abnormal C5 binding (AN path). Computational work (DFT) suggests that the AN path involves C-H oxidative addition to Ir(III) to give Ir(V) with little anion dependence. The N path, in contrast, goes by heterolytic C-H activation with proton transfer to the adjacent hydride. The proton that is transferred is accompanied by the counteranion in an anion-coupled proton transfer, leading to an anion dependence of the N path, and therefore of the N/AN selectivity. The N path goes via Ir(III), not Ir(V), because the normal NHC is a much less strong donor ligand than the abnormal NHC. PGSE NMR experiments support the formation of ion-pair in both the reactants and the products. 19F,1H-HOESY NMR experiments indicate an ion-pair structure for the products that is consistent with the computational prediction (ONIOM(B3PW91/UFF)).     

Real-time polymerase chain reaction detection of cauliflower mosaic virus to complement the 35S screening assay for genetically modified organisms

Labeling of genetically modified organisms (GMOs) is now in place in many countries, including the European Union, in order to guarantee the consumer's choice between GM and non-GM products. Screening of samples is performed by polymerase chain reaction (PCR) amplification of regulatory sequences frequently introduced into genetically modified plants. Primers for the 35S promoter from Cauliflower mosaic virus (CaMV) are those most frequently used. In virus-infected plants or in samples contaminated with plant material carrying the virus, false-positive results can consequently occur. A system for real-time PCR using a TaqMan minor groove binder probe was designed that allows recognition of virus coat protein in the sample, thus allowing differentiation between transgenic and virus-infected samples. We measured the efficiency of PCR amplification, limits of detection and quantification, range of linearity, and repeatability of the assay in order to assess the applicability of the assay for routine analysis. The specificity of the detection system was tested on various virus isolates and plant species. All 8 CaMV isolates were successfully amplified using the designed system. No cross-reactivity was detected with DNA from 3 isolates of the closely related Carnation etched ring virus. Primers do not amplify plant DNA from available genetically modified maize and soybean lines or from different species of Brassicaceae or Solanaceae that are natural hosts for CaMV. We evaluated the assay for different food matrixes by spiking CaMV DNA into DNA from food samples and have successfully amplified CaMV from all samples. The assay was tested on rapeseed samples from routine GMO testing that were positive in the 35S screening assay, and the presence of the virus was confirmed.     

Basicity of some organic superbases in acetonitrile

[structure: see text] It is shown that the pK(a) values of strong neutral organic (super)bases in acetonitrile are well described by the density functional theory (DFT) employing the isodensity polarization continuum model (IPCM) for treating solvent-solute interactions. High pK(a) values are predicted for two model compounds, and their synthesis is strongly recommended.     

Precursor memory effect determining structural properties of sulfated zirconia

Properties of two catalysts tailored in the laboratory conditions by sulfation of commercial Zr-hydroxide and Zr-hydroxide of nitrate origin were compared with those of commercial SO₄-Zr-hydroxide. Equally thermally treated samples in the temperature interval 500–700°C, and having the same amount of sulfur, show different properties indicating memory effect of their solid parent materials. The catalyst obtained by sulfation of commercial Zr-hydroxide differs in amount of residual sulfates upon calcination from other two catalysts. The instability of sulfates in the previous case might be connected to the lowest surface area values of catalyst and the highest fraction of monoclinic phase observed at all applied calcination temperatures.