Charge carrier mobility,photovoltaic, and electroluminescent properties of anthracene‐based conjugated polymers bearing randomly distributed side chains

This article reports on the synthesis, characterization, and properties of various anthracene‐containing poly (p‐phenylene‐ethynylene)‐alt‐poly(p‐phenylene‐vinylene) (PPE‐PPV) polymers (AnE‐PVs) bearing statistical distributions of various side chains. Primarily, the ratio of linear octyloxy and branched 2‐ethylhexyloxy side chains at the poly(p‐phenylene vinylene) (PPV) parts was varied, leading to the polymers stat, stat1, and stat2. Furthermore, polymers also containing asymmetric substituted PPV and poly(p‐phenylene ethynylene) units (bearing methoxy and 2‐ethylhexyloxy side chains) were prepared yielding stat3, stat4, and stat5. These materials exhibit a broad variation in their photovoltaic properties. It is once more shown that side chains and their distribution can crucially affect the photovoltaic device performance. The introduction of units with asymmetric substitution into these systems seems to be harmful for their utilization in photovoltaic applications. Organic field‐effect transistors were fabricated to investigate hole mobilities in these new materials. Large variance was observed, falling in the range of almost two orders of magnitude, indicating rather different π–π stacking behavior of the polymer backbones owing to side‐chain modifications. Moreover, a selection of the new polymeric systems was investigated regarding their potential for light‐emitting diode (LED) applications. Polymer LEDs using the polymers AnE‐PVstat, ‐stat3, ‐stat4, and ‐stat5, as the active layer showed turn‐on voltage of ～2 V and exhibited red light emission. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Two-dimensional agnor evaluation as a prognostic variable in urinary bladder carcinoma: a different approach via total agnor area/nucleus area per cell

Traditional criterions are not sufficient to predict accurately the recurrence of transitional cell carcinoma of the urinary bladder. Therefore, we aimed to evaluate the AgNORs via total AgNOR area/nucleus area (TAA/NA) for each cell as a prognostic parameter, in TCC of urinary bladder. Tumor tissues of 20 consecutive cases of male bladder cancer patients were divided into two groups as middle differentiated (LG) and high grade (HG). The extra-tumoral tissue (ETT) samples of 10 males served as control group. A second control group (HC) consisted of five healthy and normal bladder tissue samples. The 3 microm of sections from each paraffin embedded tumoral, extra-tumoral and normal tissue samples served as patient and control groups. After deparaffinization and rehydratation steps, silver (AgNO(3)) staining of nucleolar organizer regions-associated proteins (AgNORs) was performed. Instead of Giemsa stain, we used Hematoxylin for contra staining. The images of the 100 analyzable nuclei from each tissue sample, transferred by means of a video camera and video capture card from microscope and recorded onto a computer. Software was prepared in Delphi language for analysis. Mean (E+02) TAA/NA values of HC, ETT, LG and HG groups were 6.97+2.80, 5.70+1.82, 7.80+3.22 and 9.24+3.88, respectively. Statistical comparisons have shown significant differences between all groups.In conclusion, mean TAA/NA per cell has a potential to be a prognostic parameter. Therefore, further evaluation of big patient series will be useful.     

The effect of competition between the frequency of the field and the frequency of the spin flipping on the kinetics of Ising metamagnet

We consider the effect of a variable representing the competition between the frequency of the field and the frequency of the spin flipping (Ω) on the dynamics of the metamagnetic Ising model in a cubic lattice under the presence of a time varying (oscillating) external magnetic field. The system is modelled with a formalism of master equation at a mean-field level. The time averaged staggered magnetization (Ms) acts as the order parameter and divides temperature field plane into three regions: anti-ferromagnetic, paramagnetic and coexistence of anti-ferromagnetic and paramagnetic phases. It is observed that the topology of the dynamical phase diagram depends strongly on Ω as well as the ratio between interlayer and intralayer couplings.     

Reference intervals of serum folate and vitamin B12 developed from data of healthy subjects

 In this study the reference intervals for folate and vitamin B₁₂ were estimated according to the National Committee for Clinical Laboratory Standards Approved Guideline C28-A and International Federation of Clinical Chemistry recommendations. The study included 155 women and 124 men between ages 18–40. The health status was confirmed by history, physical examination and a questionnaire. The central 95% reference intervals of serum folate and vitamin B12 for women, determined non-parametrically, were found to be 3.9–18.1 ng/ml and 101–666.7 pg/ml, respectively. The reference values of serum folate and vitamin B12 for men were also found to be 2,5–17.6 ng/ml and 100–699.57 pg/ml, respectively. We did not observe subclass differences between females and males. Received: 15 April 2000 · Accepted: 15 April 2000     

A mixed integer programming model for multistage mean–variance post-tax optimization

In this paper, we introduce a mixed integer stochastic programming approach to mean–variance post-tax portfolio management. This approach takes into account of risk in a multistage setting and allows general withdrawals from original capital. The uncertainty on asset returns is specified as a scenario tree. The risk across scenarios is addressed using the probabilistic approach of classical stochastic programming. The tax rules are used with stochastic linear and mixed integer quadratic programming models to compute an overall tax and return-risk efficient multistage portfolio. The incorporation of the risk term in the model provides robustness and leads to diversification over wrappers and assets within each wrapper. General withdrawals and risk aversion have an impact on the distribution of assets among wrappers. Computational results are presented using a study with different scenario trees in order to show the performance of these models.     

Adsorption of polyvinylimidazole onto kaolinite

The adsorption of polyvinylimidazole (PVI) onto kaolinite from aqueous solutions has been investigated systematically as a function of parameters such as calcination temperature of kaolinite, pH, ionic strength, and temperature. According to the experimental results, the adsorption of PVI increases with pH from 8.50 to 11.50, temperature from 25 to 55 degrees C, and ionic strength from 0 to 0.1 mol L(-1). The kaolinite sample calcined at 600 degrees C has a maximum adsorption capacity. Adsorption isotherms of PVI onto kaolinite have been determined and correlated with common isotherm equations such as Langmuir and Freundlich isotherm models. The Langmuir isotherm model appeared to fit the isotherm data better than the Freundlich isotherm model. The physical properties of this adsorbent are consistent with the parameters obtained from the isotherm equations. Furthermore, the zeta potentials of kaolinite suspensions have been measured in aqueous solutions of different PVI concentrations and pH. From the experimental results, (i) pH strongly alters the zeta potential of kaolinite; (ii) kaolinite has an isoelectric point at about pH 2.35 in water and about pH 8.75 in 249.9 ppm PVI concentration; (iii) PVI changes the interface charge from negative to positive for kaolinite. The study of temperature effect has been quantified by calculating various thermodynamic parameters such as Gibbs free energy, enthalpy, and entropy changes. The dimensionless separation factor (RL) has shown that kaolinite can be used for adsorption of PVI from aqueous solutions.     

Indium phosphide nanofibers prepared by electrospinning method: Synthesis and characterization

Nine sets of (3 × 3) InP nanofiber samples have been successfully prepared at three different voltages (20, 25, 30 kV) and at three separate heights (5, 7, 10 cm) by electrospinning with a constant precursor flow rate of 0.3 mLh⁻¹. The crystalline structure, thermal, morphologies and nanostructure, electrical, and optical properties of the samples are characterized by X‐ray powder diffractometer (XRD) and thermal gravity‐differential scanning calorimeter (TG‐DSC), scanning electron microscopy (SEM), by Four‐Point Probe Technique (FPPT,) and ultraviolet/visible spectrometry (UV/VIS), respectively. From these measurements, we have found the formation of stoichiometric nanostructured InP with zinc‐blende structure and having lattice parameter of a = 5.874 Å, weight loss of 64.59% and crystallization temperature of 500°C, average fiber diameter of 65.82 nm, the activation energies, E_a, of the samples, and band gap energy, E_g, of the nanofibers developed at constant applied voltage 30 kV. The band gap energies determined at different distances 5, 7, and 10 cm are found to be as 1.29, 1.37, and 1.30 eV, respectively.     

Phthalocyanine with a giant dielectric constant

Compound 1 has been prepared by the reaction of 4-nitrophthalonitrile and trans-2-methoxy-4-(2-nitrovinil)phenol by the common method of nucleophilic substitution of an activated nitro group in an aromatic ring. The metallophthalocyanines 2, 3 were prepared by the reaction of a dinitrile derivative with Co(OAc)(2) or Zn(OAc)(2) in DMSO. The lutetium bis-(phthalocyaninato) complex 4 was obtained by treating the dinitrile derivative with lutetium acetate and DBU in 1-hexanol. The new compounds were characterized by elemental analyses, FT-IR, (1)H-NMR, MALDI-TOF MS and UV/Vis spectral data. The spectroscopic data of the new compounds were in accordance with the structures. The temperature and frequency dependence of dielectric and conduction properties of the spin coated film of compounds (2-4) have been studied by fabricating metal-Pc-metal structures. The results show that compound 2 has giant dielectric constant. At a low range of frequency and room temperature, ε' is found to be equal to 2.33 × 10(6), 1.53 × 10(4) and 1.03 × 10(4) for 2, 3 and 4, respectively. The giant dielectric behavior of 2 is mainly attributed to Maxwell-Wagner polarization. The obtained results also indicated that the frequency dependence of the dielectric permittivity, ε'(ω), exhibits non-Debye type relaxation for all temperatures investigated. The ac conductivity results gave a temperature dependent frequency exponent s. The results were compared with the prediction of the Quantum Mechanical Tunneling and Correlated Barrier Hopping models.     

Investigation of the behavior of an Ising metamagnet under the influence of a field using Glauber dynamics

In this study, the kinetics of the Ising metamagnet where the interlayer interactions are ferromagnetic has been investigated under the mean field approximation. In describing the kinetics of the system, Glauber stochastic dynamics in the presence of an external field which performs time-dependent oscillations, has been utilized. Obtained results could be identified by two distinct types: the asymmetric solutions oscillating in the vicinity of finite values where the lattice magnetization has different values and the symmetric solutions being zero where the sublattice magnetizations are equal to each other. On the other hand, it has been observed that in the case where the system's initial state has a homogenous magnetization it exhibits two different periodical behaviors in the course of time.     

Optical, Energetic and Exergetic Analyses of Parabolic Trough Collectors

Parabolic trough collectors generate thermal energy from solar energy. Especially, they are very convenient for applications in high temperature solar power systems. To determine the design parameters, parabolic trough collectors must be analysed with optical analysis. In addition, thermodynamics （energy and exergy） analysis in the development of an energy efficient system must be achieved. Solar radiation passes through Earth＇s atmosphere until it reaches on Earth＇s surface and is focused from the parabolic trough collector to the tube receiver with a transparent insulated envelope. A11 of them constitute a complex mechanism. We investigate the geometry of parabolic trough reflector and characteristics of solar radiation to the reflecting surface through Earth＇s atmosphere, and calculate the collecting totM energy in the receiver. The parabolic trough collector, of which design parameters are given, is analysed in regard to the energy and exergy analysis considering the meteorological specification in May, June, July and August in 1sparta/TUrkey, and the results are presented.