Chemical composition of the essential oil of Pituranthos scoparius

The essential oils obtained by hydro distillation of the aerial parts of Pituranthos scoparius were collected from different regions of Algeria and gave various yields ranging from 0.6 up to 2.8% (v/w). These samples were analyzed by GC and GC-MS showing the occurrence of monoterpene hydrocarbons and some oxygenated compounds. The major components were alpha-pinene (4.4-35.8%), limonene (0.8-66.5%), bornyl acetate (tr-9.6%), myristicin (tr-31.1) and dill apiole (0.4-47.3%). The aerial parts of P. scoparius could be either very rich or very poor in limonene, myristicin or dill apiole. Cluster analysis shows differences in essential oil compositions of samples coming from the different area collected.     

New Composite Sorbent for Removal of Sulfate Ions from Simulated and Real Groundwater in the Batch and Continuous Tests

The evaluation of groundwater quality in the Dammam formation, Faddak farm, Karbala Governorate, Iraq proved that the sulfate (SO₄²⁻) concentrations have high values; so, this water is not suitable for livestock, poultry and irrigation purposes. For reclamation of this water, manufacturing of new sorbent for permeable reactive barrier was required through precipitation of Mg and Fe hydroxides nanoparticles on the activated carbon (AC) surface with best Mg/Fe molar ratio of 7.5/2.5. Mixture of 50% coated AC and 50% scrap iron was applied to eliminate SO₄²⁻ from contaminated water with efficiency of 59% and maximum capacity of adsorption equals to 9.5 mg/g for a time period of 1 h, sorbent dosage 40 g/L, and initial pH = 5 at 50 mg/L initial SO₄²⁻ concentration and 200 rpm shaking speed. Characterization analyses certified that the plantation of Mg and Fe nanoparticles onto AC was achieved. Continuous tests showed that the longevity of composite sorbent is increased with thicker bed and lower influent concentration and flow rate. Computer solution (COMSOL) software was well simulated for continuous measurements. The reclamation of real contaminated groundwater was achieved in column set-up with efficiency of 70% when flow rate was 5 mL/min, bed depth was 50 cm and inlet SO₄²⁻ concentration was 2301 mg/L.     

Investigation of Proton Diffusion Coefficient for PbO2 Prepared from Intermediate Oxides

Russian Journal of Electrochemistry - Lead dioxide was extracted from used batteries, and used to synthesize the following intermediate oxides by heating at different temperatures: Pb12O19,...     

Growth and characterization of thin ZnO films deposited on glass substrates by electrodeposition technique

Electrodeposition technique was used in order to produce nanometric zinc oxide films on glass insulating substrates. The effect of electrolyte concentration and applied current density on the formation and growth of electrodeposited Zn thin films in aqueous solutions of ZnSO₄ were studied. After a thermal oxidation, a characterization of the structural morphology of the films deposited was carried out by optical microscopy (OM), atomic force microscopy (AFM), scanning electron microscopy (SEM) and by grazing incidence X-rays diffraction (GIXD). These characterization techniques show that the grains size of the films after oxidation at temperature 450 °C is between 5 and 15 nm, as well as the structure is polycrystalline nature with several orientations. UV/vis spectrophotometry confirms that it is possible to obtain transparent good ZnO films with an average transmittance of approximately 80% within the visible wavelength region, as well as the optical gap of obtained ZnO films is 3.17 eV.     

Cationic PLA nanoparticles for DNA delivery: comparison of three surface polycations for DNA binding, protection and transfection properties

Biodegradable cationic nanoparticles (cNP) made of poly(lactide) (PLA) have been shown to be promising carrier systems for in vivo DNA delivery and immunization. In previous work, we have described a versatile approach for the elaboration of cationic PLA cNP based on the use of pre-formed particles and subsequent adsorption of a model polycation, the poly(ethylenimine) (PEI). Here, we evaluated two more polycations, chitosan and poly(2-dimethyl-amino)ethyl methacrylate (pDMAEMA)) to determine the most suitable one for the development of PLA cNP as DNA carriers. Cationic PLA-PEI, PLA-chitosan and PLA-pDMAEMA nanoparticles were compared for interaction with plasmid DNA and, more importantly, with regards to the biological properties of bound DNA. pDMAEMA coating yielded the most positively charged nanoparticles with the highest DNA binding capacity (32 mg/g). Loaded with DNA, all three cNP were in the same size range ( approximately 500 nm) and had a negative zeta potential (-50 mV). PLA-chitosan was the only cNP that released DNA at pH 7; the two others required higher pH. Adsorption and release from cNP did not alter structural and functional integrity of plasmid DNA. Moreover, DNA coated onto cNP was partially protected from nuclease degradation, although this protection was less efficient for PLA-chitosan than others. The highest transfection efficiency in cell culture was obtained with PLA-pDMAEMA carriers. We have shown that at least three different cationic polymers (chitosan, PEI, pDMAEMA) can be used for the production of PLA-based particulate DNA carriers and most probably other cationic polymers can also be used in the same purpose. PLA-pDMAEMA cNP were the most promising system for DNA delivery in this in vitro study. Our future work will focus on the in vivo evaluation of these gene delivery systems.     

Hybrid observer design for linear switched system via Differential Petri Nets

The aim of this paper is to propose a hybrid observer design for linear switched systems modelled either via Differential Petri Nets (DPN) or via Timed Differential Petri Nets (TDPN). The switched systems, herein, considered are characterized by switching laws that can depend on the continuous states or on both of a given dwell time and the continuous states. In addition, the structure of the proposed observers is based on a discrete observer and a continuous observer on interaction. The discrete observer reconstructs the discrete mode, by estimating both of the discrete marking and the firing vector. Once, the active mode is obtained, the continuous states are estimated. Finally, the outputs of the continuous observer are used to update the marking and the firing vector. At the end of the paper, several simulation results are presented to illustrate the proposed approach.     

A Comprehensive Review for Groundwater Contamination and Remediation: Occurrence,Migration and Adsorption Modelling

The provision of safe water for people is a human right; historically, a major number of people depend on groundwater as a source of water for their needs, such as agricultural, industrial or human activities. Water resources have recently been affected by organic and/or inorganic contaminants as a result of population growth and increased anthropogenic activity, soil leaching and pollution. Water resource remediation has become a serious environmental concern, since it has a direct impact on many aspects of people’s lives. For decades, the pump-and-treat method has been considered the predominant treatment process for the remediation of contaminated groundwater with organic and inorganic contaminants. On the other side, this technique missed sustainability and the new concept of using renewable energy. Permeable reactive barriers (PRBs) have been implemented as an alternative to conventional pump-and-treat systems for remediating polluted groundwater because of their effectiveness and ease of implementation. In this paper, a review of the importance of groundwater, contamination and biological, physical as well as chemical remediation techniques have been discussed. In this review, the principles of the permeable reactive barrier’s use as a remediation technique have been introduced along with commonly used reactive materials and the recent applications of the permeable reactive barrier in the remediation of different contaminants, such as heavy metals, chlorinated solvents and pesticides. This paper also discusses the characteristics of reactive media and contaminants’ uptake mechanisms. Finally, remediation isotherms, the breakthrough curves and kinetic sorption models are also being presented. It has been found that groundwater could be contaminated by different pollutants and must be remediated to fit human, agricultural and industrial needs. The PRB technique is an efficient treatment process that is an inexpensive alternative for the pump-and-treat procedure and represents a promising technique to treat groundwater pollution.     

Development of an electron paramagnetic resonance methodology for studying the photo-generation of reactive species in semiconductor nano-particle assembled films

An experimental approach involving electron paramagnetic resonance is proposed for studying photo-generated reactive species in semiconductor nano-particle-based films deposited on the internal wall of glass capillaries. This methodology is applied here to nano-TiO₂ and allows a semi-quantitative analysis of the kinetic evolutions of radical production using a spin scavenger probe.