Effect of increasing pressure on the structure and temperature-induced changes in magnetic properties of heterospin complexes

Russian Chemical Bulletin - The study is concerned with structural rearrangements in the crystals of heterospin complexes Cu(hfac)2 with nitroxide radicals LR (hfac is hexafluoroacetylacetonate, LR...     

Destruction of a solid film under the action of ultrashort laser pulse

Molecular-dynamics (MD) simulation of the destruction of a crystal film heated by a femtosecond laser pulse was carried out. Heating is assumed to be instantaneous, because there is no time for the material to be displaced during the pulse. Film destruction is caused by the interaction of unloading waves. It can be considered as a model of a more complex process of splitting out of a thin surface layer from a massive target in the case where the layer remains solid after heating. It was found that the crystal order is broken due to the stretching strains and to the strong anisotropy of residual stress, resulting in a bipartition of the layer separating from the target. The lattice stretching and the formation of anisotropic stresses are due to the expansion of a heated lattice.     

External validation of the biodegradability prediction model CATABOL using data sets of existing and new chemicals under the Japanese Chemical Substances Control Law

External validation of the biodegradability prediction model CATABOL was conducted using test data of 338 existing chemicals and 1123 new chemicals under the Japanese Chemical Substances Control Law. CATABOL predicts that 1089 chemicals will have a BOD < 60% while 925 (85%) actually have an observed BOD<60%. The percentage of chemicals with an observed BOD value <60% tends to increase as the predicted BOD values decrease. In contrast, 340 chemicals were predicted to have a BOD > or = 60% and 234 (69%) actually had an observed BOD > or = 60%. The prediction of poor biodegradability was more accurate than the predictions of high biodegradability. The features of chemical structures affecting CATABOL predictability were also investigated.     

Synthesis,structure, and magnetic properties of the cobalt(<Emphasis Type="SmallCaps">II</Emphasis>) 1,3,5-benzenetricarboxylate layered coordination polymer

The reaction of Co(NO₃)₂·6H₂O with 1,3,5-benzenetricarboxylic acid (H₃btc, trimesic acid) in DMF at 100 °C afforded the coordination polymer [Co₃(dmf)₆(btc)(Hbtc)(H₂btc)]··9H₂O (1) (dmf is N,N′-dimethylformamide, DMF). According to the X-ray diffraction study, the metal-organic coordination polymer is composed of planar honeycomb (6,3) networks, in which the organic benzenetricarboxylate anions and the inorganic Co²⁺ cations play a role of three-connected nodes. Disordered water molecules are intercalated between the layers. A study of the magnetic properties showed the presence of a weak antiferromagnetic coupling between the Co²⁺ ions (S = 3/2). Dedicated to Academician G. A. Abakumov on the occasion of his 70th birthday. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1719–1723, September, 2007.     

Synthesis of Molecular Wires of Linear and Branched Bis(terpyridine)‐Complex Oligomers and Electrochemical Observation of Through‐Bond Redox Conduction

Films of linear and branched oligomer wires of Fe(tpy)₂ (tpy=2,2′:6′,2′′‐terpyridine) were constructed on a gold‐electrode surface by the interfacial stepwise coordination method, in which a surface‐anchoring ligand, (tpy? C₆H₄N?NC₆H₄? S)₂ ( 1 ), two bridging ligands, 1,4‐(tpy)₂C₆H₄ ( 3 ) and 1,3,5‐(C?C? tpy)₃C₆H₃ ( 4 ), and metal ions were used. The quantitative complexation of the ligands and Fe^II ions was monitored by electrochemical measurements in up to eight complexation cycles for linear oligomers of 3 and in up to four cycles for branched oligomers of 4 . STM observation of branched oligomers at low surface coverage showed an even distribution of nanodots of uniform size and shape, which suggests the quantitative formation of dendritic structures. The electron‐transport mechanism and kinetics for the redox reaction of the films of linear and branched oligomer wires were analyzed by potential‐step chronoamperometry (PSCA). The unique current‐versus‐time behavior observed under all conditions indicates that electron conduction occurs not by diffusional motion but by successive electron hopping between neighboring redox sites within a molecular wire. Redox conduction in a single molecular wire in a redox‐polymer film has not been reported previously. The analysis provided the rate constant for electron transfer between the electrode and the nearest redox‐complex moiety, k₁ (s^?1), as well as that for intrawire electron transfer between neighboring redox‐complex moieties, k₂ (cm² mol^?1 s^?1). The strong effect of the electrolyte concentration on both k₁ and k₂ indicates that the counterion motion limits the electron‐hopping rate at lower electrolyte concentrations. Analysis of the dependence of k₁ and k₂ on the potential gave intrinsic kinetic parameters without overpotential effects: k₁⁰=110 s^?1, k₂⁰=2.6×10¹² cm² mol^?1 s^?1 for [n Fe 3 ], and k₁⁰=100 s^?1, k₂⁰=4.1×10¹¹ cm² mol^?1 s^?1 for [n Fe 4 ] (n=number of complexation cycles).     

UV-Vis, NMR, and time-resolved spectroscopy analysis of photoisomerization behavior of three- and six-azobenzene-bound tris(bipyridine)cobalt complexes

The photoisomerization properties of tris(bipyridine)cobalt complexes containing six or three azobenzene moieties, namely, [Co(II)(dmAB)3](BF4)2 [dmAB = 4,4'-bis[3'-(4'-tolylazo)phenyl]-2,2'-bipyridine], [Co(III)(dmAB)3](BF4)3, [Co(II)(mAB)3](BF4)2 [mAB = 4-[3' '-(4' '-tolylazo)phenyl]-2,2'-bipyridine], and [Co(III)(dmAB)3](BF4)3, derived from the effect of gathering azobenzenes in one molecule and the effect of the cobalt(II) or cobalt(III) ion were investigated using UV-vis absorption spectroscopy, femtosecond transient spectroscopy, and 1H NMR spectroscopy. In the photostationary state of these four complexes, nearly 50% of the trans-azobenzene moieties of the Co(II) complexes were converted to the cis isomer, and nearly 10% of the trans-azobenzene moieties of the Co(III) complexes isomerized to the cis isomer, implying that the cis isomer ratio in the photostationary state upon irradiation at 365 nm is controlled not by the number of azobenzene moieties in one molecule but rather by the oxidation state of the cobalt ions. The femtosecond transient absorption spectra of the ligands and the complexes suggested that the photoexcited states of the azobenzene moieties in the Co(III) complexes were strongly deactivated by electron transfer from the azobenzene moiety to the cobalt center to form an azobenzene radical cation and a Co(II) center. The cooperation among the photochemical structural changes of six azobenzene moieties in [Co(II)(dmAB)3](BF4)2 was investigated with 1H NMR spectroscopy. The time-course change in the 1H NMR signals of the methyl protons indicated that each azobenzene moiety in [Co(II)(dmAB)3](BF4)2 isomerized to a cis isomer with a random probability of 50% and without interactions among the azobenzene moieties.     

Non-Sonogashira-type palladium-catalyzed coupling reactions of terminal alkynes assisted by silver(I) oxide or tetrabutylammonium fluoride

Palladium-catalyzed reaction of aryl and alkenyl halides with terminal alkynes in the presence of silver(I) oxide as an activator furnishes various arylated or alkenylated alkynes in good to excellent yields. The similar coupling reaction is also found to proceed using tetrabutylammonium fluoride (TBAF) or tetrabutylammonium hydroxide (TBAOH) as an activator.     

Analysis of PCB by on-line coupled HPLC-HRGC

Summary On-line coupled HPLC-GC has been used for the fractionation and analysis of polychlorobiphenyls (PCB) according to their planarity. HPLC elution with porous graphitic carbon (PGC) as stationary phase, enables fractionation of PCB into classes according to the amount ofortho-substitution, which is related to congener toxicity. This is a preliminary step before GC analysis, which enables complete separation of PCB congeners according to vapour pressure. Conditions for HPLC-HRGC coupling were optimised, in particular the appropriate proper HPLC solvent was selected, because it determines eluent strength and selectivity and the transfer conditions. Different solvent were studied—n-hexane, dichloromethane, benzene, toluene, and their mixtures. Samples containing PCB standards and the commercial mixtures Aroclor 1242 and 1254 were analysed. Dichloromethane-n-hexane, 1:1, was selected as mobile phase for separation of poly-ortho from mono-ortho PCB; benzene-dichloromethane 30:70 resulted in the best separation of the most retained non-ortho-substituted PCB. Under these conditions the co-solvent trapping procedure, performed by adding 4% ethylbenzene as co-solvent, was used as transfer technique to overcome the drawback of losses of volatile congeners. Appropriate analysis conditions were successfully used to fractionate the technical PCB formulations Aroclor 1242 and 1254.