Fine-tuning water exchange on Gd(III) poly(amino carboxylates) by modulation of steric crowding

In the objective of optimizing water exchange rate on stable, nine-coordinate, monohydrated Gd(III) poly(amino carboxylate) complexes, we have prepared monopropionate derivatives of DOTA4- (DO3A-Nprop4-) and DTPA5- (DTTA-Nprop5-). A novel ligand, EPTPA-BAA(3-), the bisamylamide derivative of ethylenepropylenetriamine-pentaacetate (EPTPA5-) was also synthesized. A variable temperature 17O NMR study has been performed on their Gd(III) complexes, which, for [Gd(DTTA-Nprop)(H2O)]2- and [Gd(EPTPA-BAA)(H2O)] has been combined with multiple field EPR and NMRD measurements. The water exchange rates, k(ex)(298), are 8.0 x 10(7) s(-1), 6.1 x 10(7) s(-1) and 5.7 x 10(7) s(-1) for [Gd(DTTA-Nprop)(H2O)]2-, [Gd(DO3A-Nprop)(H2O)]- and [Gd(EPTPA-BAA)(H2O)], respectively, all in the narrow optimal range to attain maximum proton relaxivities, provided the other parameters (electronic relaxation and rotation) are also optimized. The substitution of an acetate with a propionate arm in DTPA5- or DOTA4- induces increased steric compression around the water binding site and thus leads to an accelerated water exchange on the Gd(III) complex. The k(ex) values on the propionate complexes are, however, lower than those obtained for [Gd(EPTPA)(H2O)]2- and [Gd(TRITA)(H2O)]- which contain one additional CH(2) unit in the amine backbone as compared to the parent [Gd(DTPA)(H2O)]2- and [Gd(DOTA)(H2O)]-. In addition to their optimal water exchange rate, [Gd(DTTA-Nprop)(H2O)]2- has, and [Gd(DO3A-Nprop)(H2O)]- is expected to have sufficient thermodynamic stability. These properties together make them prime candidates for the development of high relaxivity, macromolecular MRI contrast agents.     

Crystal Structure of a New Ammonium Potassium Selenomolybdate Compound K3.31(NH4)0.69[Se2Mo5O21]·2H2O

An inorganic compound formulated as K_3.31(NH₄)_0.69[Se₂Mo₅O₂₁]·2H₂O has been synthesized by conventional solution method and characterized by scanning electron microscopy, IR, UV-Vis spectroscopies behaviors. The structure of the title compound has been determined from a single-crystal X-ray diffraction. It crystallizes in the monoclinic space group P2₁/n, with a?=?9.9371(2) ?, b?=?23.3545(2) ?, c?=?10.5179(2) ?, β?=?114.12(3)°, V?=?2227.7(5) ?³ and Z?=?4. It was revealed that the Strandberg-type polyoxoselenomolybdate cluster can be considered as a ring formed by five distorted edge- and corner-sharing MoO₆ octahedra, capped on both poles by a selenate pyramids sharing three vertices with the ring molybdenum centers. The Strandberg clusters are connected with ammonium ions and water molecules through hydrogen-bonding interactions which ensure the cohesion of the structure into a three-dimensional network.     

The Influence of Ripeness on the Phenolic Content,Antioxidant and Antimicrobial Activities of Pumpkins (Cucurbita moschata Duchesne)

Cucurbita moschata Duchesne (Cucurbitaceae) is a plant food highly appreciated for the content of nutrients and bioactive compounds, including polyphenols and carotenoids, which contribute to its antioxidant and antimicrobial capacities. The purpose of this study was to identify phenolic acids and flavonoids of Cucurbita moschata Duchesne using high-performance liquid chromatography–diode array detection–electrospray ionization tandem mass spectrometry (HPLC–DAD–ESI-MS) at different ripening stages (young, mature, ripened) and determine its antioxidant and antimicrobial activities. According to the results, phenolic acids and flavonoids were dependent on the maturity stage. The mature fruits contain the highest total phenolic and flavonoids contents (97.4 mg GAE. 100 g⁻¹ and 28.6 mg QE. 100 g⁻¹).A total of 33 compounds were identified. Syringic acid was the most abundant compound (37%), followed by cinnamic acid (12%) and protocatechuic acid (11%). Polyphenol extract of the mature fruits showed the highest antioxidant activity when measured by DPPH (0.065 μmol TE/g) and ABTS (0.074 μmol TE/g) assays. In the antimicrobial assay, the second stage of ripening had the highest antibacterial activity. Staphylococcus aureus was the most sensitive strain with an inhibition zone of 12 mm and a MIC of 0.75 mg L⁻¹. The lowest inhibition zone was obtained with Salmonella typhimurium (5 mm), and the MIC value was 10 mg L⁻¹.     

Mechanistic insights into dopaminergic and serotonergic neurotransmission – concerted interactions with helices 5 and 6 drive the functional outcome

Brain functions rely on neurotransmitters that mediate communication between billions of neurons. Disruption of this communication can result in a plethora of psychiatric and neurological disorders. In this work, we combine molecular dynamics simulations, live-cell biosensor and electrophysiological assays to investigate the action of the neurotransmitter dopamine at the dopaminergic D₂ receptor (D₂R). The study of dopamine and closely related chemical probes reveals how neurotransmitter binding translates into the activation of distinct subsets of D₂R effectors (i.e.: G_i2, G_oB, G_z and β-arrestin 2). Ligand interactions with key residues in TM5 (S5.42) and TM6 (H6.55) in the D₂R binding pocket yield a dopamine-like coupling signature, whereas exclusive TM5 interaction is typically linked to preferential G protein coupling (in particular G_oB) over β-arrestin. Further experiments for serotonin receptors indicate that the reported molecular mechanism is shared by other monoaminergic neurotransmitter receptors. Ultimately, our study highlights how sequence variation in position 6.55 is used by nature to fine-tune β-arrestin recruitment and in turn receptor signaling and internalization of neurotransmitter receptors.

Neurotransmitter contacts within the receptor binding site differentially contribute to the overall functional response: transmembrane helix (TM) 5 contacts promote G protein coupling whereas concerted TM5–TM6 contacts enhance β-arrestin recruitment.     

Hydrogeochemical modeling for groundwater management in arid and semiarid regions using MODFLOW and MT3DMS: A case study of the Jeffara of Medenine coastal aquifer,South-Eastern Tunisia

The study of water quality and the quantification of reserves and their variations according to natural and anthropogenic forcing is necessary to establish an adequate management plan for groundwater resources. For this purpose, a modeling approach is a useful tool that allows, after calibration phase and verification of simulation, and under different scenarios of forcing and operational changes, to estimate and control the groundwater quantity and quality. The main objective of this study is to collect all available data in a model that simulates the Jeffara of Medenine coastal aquifer system functioning. To achieve this goal, a conceptual model was constructed based on previous studies and hydrogeological investigations. The regional groundwater numerical flow model for the Jeffara aquifer was developed using MODFLOW working under steady-state and transient conditions. Groundwater elevations measured from the piezometric wells distributed throughout the study area in 1973 were selected as the target water levels for steady state (head) model calibration. A transient simulation was undertaken for the 42 years from 1973 to 2015. The historical transient model calibration was satisfactory, consistent with the continuous piezometric decline in response to the increase in groundwater abstraction. The developed numerical model was used to study the system's behavior over the next 35 years under various constraints. Two scenarios for potential groundwater extraction for the period 2015–2050 are presented. The predictive simulations show the effect of the increase of the exploitation on the piezometric levels. To study the phenomenon of salinization, which is one of the most severe and widespread groundwater contamination problems, especially in coastal regions, a solute transport model has been constructed by using MT3DMS software coupled with the groundwater flow model. The best calibration results are obtained when the connection with the overlying superficial aquifer is considered suggesting that groundwater contamination originates from this aquifer. Recommendations for water resource managers

• The results of this study show that Groundwater resources of Jeffara of Medenine coastal aquifer in Tunisia are under immense pressure from multiple stresses.
• The water resources manager must consider the impact of economic and demographic development in groundwater management to avoid the intrusion of saline water.
• The results obtained presented some reference information that can serve as a basis for water resources planning.
• The model runs to provide information that managers can use to regulate and adequately control the Jeffara of Medenine water resources.

     

A new insight into suction and dilution effects in capillary electrophoresis coupled to mass spectrometry via an electrospray ionization interface. Part I-Suction effect

The hyphenation of CE with MS is nowadays accepted as a powerful analytical approach. Employing ESI, the most common interface, one challenge is to provide quantitative information, which is quite a difficult task, as it is linked, among other factors, to suction and dilution effects. In the coaxial ESI configuration, the suction effect has been presented in literature as stemming from nebulizing gas (NG) flow rate and drying gas temperature. But as this interface consists in three concentric capillaries, allowing for BGE, sheath liquid (SL) and NG mixing, it is demonstrated herein that other parameters are also involved in this suction effect: the CE capillary protrusion from the interface needle, SL flow rate, and overall BGE flow rate and velocity profile. Whereas NG flow rate is the parameter affecting suction to a greater extent, separation capillary protruding length, SL, and overall BGE flow rate have a significant additional impact on this phenomenon. It is shown that SL flow rate can affect suction differently according to the NG velocity, which may be explained by modification of the Taylor cone geometry. Furthermore, it appears that suction effect is noticeably favored by a parabolic velocity profile of the BGE, again probably due to the Taylor cone shape modification. Finally, the temperature gradient created by the contact between the heated NG and the separation capillary enhances this effect.     

Single-run separation of cationic, anionic, and polyanionic compounds by CE-ESI-MS

A method for a single-run separation of cationic, anionic, and polyanionic compounds by CE hyphenated to ESI MS (CE-ESI-MS) is described. One of the main issues for coupling CE to MS with an ESI source consists in maintaining an electric contact for the electrophoretic separation. This condition is only performed if a liquid flow arising from the separation capillary is directed to the needle, making it coupling-compatible. This latter situation is incompatible with the separations of polyanionic compounds of higher electrophoretic mobility (in absolute value) than the electroosmotic mobility, performed in bare fused-silica capillaries under a negative polarity. In this study, several alternative approaches were evaluated to circumvent this difficulty, and applied to the setup of the CE-MS separation of a mixture containing both cationic and polyanionic compounds, which are synthesis intermediates of contrast agents for medical imaging. Eventually, the detection of the cationic and anionic compounds in a single run could be obtained by either using neutrally coated polymethylsiloxane (DB-1) capillaries and simultaneously applying a negative voltage polarity and a pressure allowing to compensate for the residual cathodic EOF or by dynamically modifying the inner wall of a bare fused-silica capillary with a polycationic polymer (hexadimethrine bromide) and using it afterwards under negative voltage polarity.     

Preparation of activated carbon from date pits: Effect of the activation agent and liquid phase oxidation

Two series of activated carbons have been prepared from date pits; series C, using carbon dioxide as activating agent, and series S, prepared by activation with steam under the same experimental conditions. The obtained samples were oxidized with nitric acid in order to introduce more oxygen surface groups. The surface area and porosity of the parent and oxidized activated carbons were studied by N₂ adsorption at 77 K and CO₂ adsorption at 273 K. The oxygen surface complexes were characterized by temperature-programmed decomposition (TPD). The results show that carbon dioxide and steam activations produce microporous carbons with an increasing amount of CO evolving groups when increasing the burn-off. On the other hand, oxidation with nitric acid increases the amount of CO and CO₂ evolved by the decomposition of surface oxygen groups, this increase being related to the development of porosity in the carbon with the degree of activation and to the activating agent used (CO₂ versus steam).