Mononuclear nitrogen/sulfur-ligated zinc methoxide and hydroxide complexes: investigating ligand effects on the hydrolytic stability of zinc alkoxide species

The synthesis and properties of mononuclear zinc methoxide ([(ebnpa)Zn-OCH3]ClO4) (1) and hydroxide ([(ebnpa)Zn-OH]ClO4) (2) complexes of a new mixed nitrogen/sulfur ligand (ebnpa = N-2-(ethylthio)ethyl-N,N-bis(6-neopentylamino-2-pyridylmethyl)amine) are reported. The structures of 1 and 2 were determined by X-ray diffraction. Each possesses a single zinc-coordinated anion (methoxide or hydroxide) and exhibits an overall trigonal bipyramidal geometry. Structural and spectroscopic studies indicate the presence of two hydrogen-bonding interactions involving the oxygen atom of the zinc-bound anion in each complex. Treatment of [(ebnpa)Zn-OH]ClO4 with CH3OH results in the formation of an equilibrium mixture of 1 and 2. 1H NMR spectroscopic methods were used to examine the equilibrium as a function of temperature, yielding KMe (304 K) = 0.30(8), DeltaHMe = -0.9(1) kcal/mol, and DeltaSMe = -5(1) eu. The negative enthalpy indicates that spontaneous zinc alkoxide formation from a hydroxide precursor occurs in this system at low temperature. Using the experimentally determined DeltaHMe value, we found the homolytic Zn-O bond dissociation energy (BDE) in the Zn-OCH3 unit to be approximately -14 kcal/mol relative to the Zn-O BDE in the Zn-OH unit.     

Structure of microparticles in solid-stabilized emulsions

Emulsions of oil and water stabilized by adsorbed solid particles are known as solid-stabilized emulsions (often referred to as Pickering emulsions). Using confocal microscopy, we have studied the assembly of colloidal-sized polystyrene particles in poly(dimethylsiloxane)-in-water solid-stabilized emulsions. Monodisperse polystyrene particles, when included in the emulsions at low concentrations, were found to form small patches with local "hexagonal" order, separated by other particle-free domains. Polystyrene particles with different sizes (1 and 4 microm) and different wettability could simultaneously segregate to the emulsion interface; even mixtures of hydrophobic and hydrophilic solid particles were found to simultaneously segregate to the same interface.     

Dynamics and collapse of two-dimensional colloidal lattices

One interesting aspect of colloidal particles is the formation of colloidal crystals at the 2D and 3D levels. Here we report the dynamics and collapse of colloidal lattices at liquid-liquid interfaces using Pickering emulsions as an experimental template. The colloidal particles oscillate around their equilibrium positions. The short-time diffusion constant (<10 s) of single particles increases with increasing lattice spacing; the oil-phase viscosity has an effect on diffusion only at large interparticle distances. Strikingly, we observe that the equilibrium structure can be disturbed when increasing the output laser intensity in a confocal laser scanning microscope, which leads to the collapse of colloidal lattices in the presence of small laser powers.     

Dynamics of charged microparticles at oil-water interfaces

Solid-stabilized emulsions have been used as a model system to investigate the dynamics of charged microparticles with diameters of 1.1 microm at oil-water interfaces. Using confocal microscopy, we investigated the influences of interfacial curvature, cluster size, and temperature on the diffusion of solid particles. Our work suggests that a highly curved emulsion interface slows the motion of solid particles. This qualitatively supports the theoretical work by Danov et al. (Danov, K. D.; Dimova, R.; Pouligny, B. Phys. Fluids 2000, 12, 2711); however, the interfacial curvature effect decreases with increasing oil-phase viscosity. The diffusion of multiparticle clusters at oil-water interfaces is a strong function of cluster size and oil-phase viscosity and can be quantitatively related to fractal dimension. Finally, we report the influence of temperature and quantify the diffusion activation energy and friction factor of the particles at the investigated oil-water interfaces.     

EFFECT OF FISH MOVEMENT AND FLEET SPATIAL BEHAVIOR ON MANAGEMENT OF FISH SUBSTOCKS

I investigated the questions (i) how much movement of fish between areas within a stock is required before the areas can be managed jointly instead of separately and (ii) how is the trade-off between separate and joint management affected by the spatial behavior of the fishing fleet? I addressed these questions using a simulation model of a fishery on a stock that is divided into two areas (substocks) between which fish can move. Under joint management, fleet spatial behavior is characterized by its “switching level,” or the biomass level in the currently fished area at or below which the fleet will switch to the other area. Catch levels were calculated under both separate and joint management for a range of movement rates and switching levels. I also studied the effect of differences in natural mortality rates between the two areas. When the natural mortality rates were the same for the two areas, (i) separate management resulted in higher catch than joint management, (ii) joint management only approached the catch of separate management when movement rate of fish between the two areas was very high, (iii) the difference between separate and joint management was greatest when (a) the switching level of the joint fleet was low (i.e., inertia was high) and (b) the joint fleet had a preference for one area. When natural mortality rate was different in the two areas, and (i) the joint fleet did not prefer one area, (a) separate management produced higher catches at low fish movement rates while joint management produced higher catches at high movement rates and (b) switching level had no effect on catch, and (ii) when the fleet had a preference for the area with the higher natural mortality rate, separate management resulted in higher catches than joint management, and the difference increased with increasing fish movement rate. These simulations suggest that the relative merits of separate and joint management of two areas depends on the assumptions one makes about the spatial behavior of the fishing fleet. This behavior is as important as movement of fish between the areas, which is normally assumed to be the overriding determinant of the relative merits of separate and joint management.     

Impact of multiple re-use of anion-exchange chromatography media on virus removal

We evaluated viral clearance in multiply-cycled anion-exchange media run in flow-through mode. We found that anion-exchange columns do not lose viral clearance capacity after extensive re-use, if they are cleaned with recommended buffers that do not chemically degrade the media. In contrast, anion-exchange (AEX) columns that are not cleaned or are cleaned with buffers that chemically degrade the media lost viral clearance capacity after extended use. In these cases, other performance attributes that changed at the same time were increased band spreading, decreased DNA clearance and accumulating backpressure that prevented re-use past 80-120 cycles. Thus, our data suggests that flow through mode anion-exchange columns that are cleaned with recommended cleaning buffers, and periodically monitored for band spreading, DNA clearance and/or backpressure need not be re-evaluated for viral clearance at the end of the validated media lifetime.     

Four Easy Ways to a Faster FFT

The Fast Fourier Transform (FFT) was named one of the Top Ten algorithms of the 20th century , and continues to be a focus of current research. A problem with currently used FFT packages is that they require large, finely tuned, machine specific libraries, produced by highly skilled software developers. Therefore, these packages fail to perform well across a variety of architectures. Furthermore, many need to run repeated experiments in order to re-program their code to its optimal performance based on a given machine's underlying hardware. Finally, it is difficult to know which radix to use given a particular vector size and machine configuration. We propose the use of monolithic array analysis as a way to remove the constraints imposed on performance by a machine's underlying hardware, by pre-optimizing array access patterns. In doing this we arrive at a single optimized program. We have achieved up to a 99.6% increase in performance, and the ability to run vectors up to 8388608 elements larger, on our experimental platforms. Preliminary experiments indicate different radices perform better relative to a machine's underlying architecture.     

Robustness of virus removal by protein A chromatography is independent of media lifetime

The robustness of virus clearance with respect to protein A media reuse was demonstrated using media with four matrix chemistries: Protein A immobilized ProSep A, Poros A50, Protein A ceramic Hyper DF and MabSelect SuRe, an alkali resistant protein A ligand. Endogenous retrovirus clearance, step yield, impurity clearance and other performance parameters were evaluated periodically in media cycled up to 300 times. Media lifetime was generally limited by either declining step yield or media fouling. However, clearance of endogenous retrovirus remained in an acceptable range, either increasing or remaining constant. Multiply cycled media were tested for clearance of three viruses (SV40, X-MuLV, and MMV); clearance was comparable to na?ve media. Overall, virus clearance by protein A chromatography appears to be extremely robust with respect to media age.     

Understanding droplet bridging in ionic liquid-based Pickering emulsions

Copper nanoparticles are prepared in aqueous solution by reducing copper ions with hydrazine hydrate in the presence of cetyl trimethylammonium bromide (CTAB) and polyvinylpyrrolydone (PVP) as stabilizers. With only CTAB was used as stabilizer, copper nanoparticles are aggregated and partially oxidized to Cu(2)O. When both PVP and CTAB were used, dispersed copper nanoparticles with 56 nm diameter were obtained. Copper nanoparticles are simply mixed with poly (3,4-ethylenedioxythiophene)/poly(styrenesulfonate) (PEDOT/PSS) in aqueous solution to form conducting composite. The effect of copper weight percent and surfactants on the conductivity and stability of the composite has been investigated.