Performance of noise barriers with various edge shapes and acoustical conditions

The performances of barriers having different shapes and surface conditions were tested using the boundary element method in a well-controlled environment. The heights and widths of the barriers were standardized and the insertion losses for six receiver positions were averaged and compared. Figures displaying the results allow for straightforward barrier performance estimation. It was shown that absorbing and soft edges significantly improve the efficiency of the barrier, but configuration modifications provide only a slight improvement. The soft T-shaped barrier produces the highest performance. A 3 m high T-shaped barrier provides the same performance as a 10 m high plain barrier. The spectral efficiency was also investigated. The insertion loss spectra for the absorbing and the soft barriers exhibit a similar shape, but the rigid barrier differs from these two.     

Syntheses and properties of dithia‐tetrahomodiaza‐calix[4]arenes bridged by cystine unit

Dithia‐tetrahomodiaza‐calix[4]arenes were synthesized by the cyclization reactions of bis(3‐(chloro‐methyl)‐2‐hydroxyphenyl)sulfide with cystine peptides in moderate yields. Conformational analysis of the macrocycles by using nmr spectroscopy reveled that the cyclophanes adopt a cone‐like form as a preferable conformation and the cystine bridge moiety is incorporated in the cavity. The calixarene analogs can extract transion metals such as Zn²⁺ and Cu²⁺ ions from an aqueous phase into chloroform.     

A new method of removing excess of reagent from organic phases in the solvent extraction of metal complex anions with quaternary ammonium salts: Spectrophotometric determination of micro amounts of cobalt with 2-nitroso-1-naphthol-4-sulfonic acid

The removal of excess reagent extracted into an organic phase in the solvent extraction of a metal complex anion with a quaternary ammonium ion is discussed. With a given chelating ligand (HO—R—SO₃H), the order of extractability is HO—R—SO₃^- > M(OR—SO₃)^n- > X^- > ^-O—R—SO₃^- when an anion such as nitrate or halide is added. If suitable amounts of the anion are added, only the excess of reagent can be removed. The principle is applied to the extraction with zephiramine of the cobalt complex anion formed with 2-nitroso-1-naphthol-4-sulfonic acid. Micro amounts of cobalt in pure nickel salts were determined spectrophotometrically.     

Determination of sulfate in river water by flow injection analysis

Sulfate ion in river water is determined by flow injection analysis at a rate of 30 samples per hour; the sulfate contents are typically less than 30 ppm. The reagent solution contains dimethylsulfonazo-III, barium chloride, potassium nitrate and chloroacetate buffer in 70% ($\text{v}\text{v}$) ethanol, and is saturated with barium sulfate. The aqueous carrier stream is also saturated with barium sulfate. The sample is filtered and treated with Amberlite IR120-B cation-exchanger before injection into the carrier stream, and the decoloration of the barium—dimethylsulfonazo-III complex by sulfate is measured at 662 nm. The calibration graph is linear over the range 0–30 μg ml^-1 for sulfate in water.     

Systematic enantiomeric separation of [60]fullerene bisadducts possessing an inherent chiral addition pattern

The optical resolution of trans-2 and trans-3 [60]fullerene bisadducts with an inherent chiral addition pattern, modified by Bingel reaction, cycloaddition by benzyne, Prato reaction, and cycloaddition by o-quinodimethane, was systematically investigated by using chiral HPLC columns (Chiralcel OD and Chiralpak AD). The chiroptical properties of enantiomers separated were also examined.     

Efficient synthesis and hydrolysis of cyclic oxalate esters of glycols

Based on the mechanism postulated for the formation of the cyclic carbonates 3 in the reactions of glycols 1 with oxalyl chloride in the presence of triethylamine, we present here three efficient syntheses of the cyclic oxalates 2 of various glycols 1 by controlling the formation of 3: replacement of the base by pyridine markedly diminishes yields of 3 in all reactions, realizing dramatic reversals of the product ratios in the reactions with the (R*,R*)-compounds 1g-i,q,r and pinacol (1k); although considerable amounts of the oxalate polymers are formed in the reactions with some (R*,S*)-glycols, this drawback can be removed by the use of 2,4,6-collidine instead of pyridine; 1,1'-oxalyldiimidazole is useful for the synthesis of two selected cyclic oxalates 2e,f. The cyclic oxalates 2 other than trisubstituted and tetrasubstituted ones were found to be very reactive: kinetic studies on the hydrolysis of 1,4-dioxane-2,3-dione (2a) as well as its mono- and some selected 5,6-disubstituted derivatives 2 have revealed that they undergo hydrolysis 260-1500 times more rapidly than diethyl oxalate (12) in acetate buffer-acetonitrile (pH 5.69) at 25 degrees C. Although the cyclic oxalate 21 from cis-1,2-cyclopentanediol (11) was 1.5 times more reactive than 2a, it has been shown with other substrates that increasing number of the alkyl substituents decreases the rate of hydrolysis. On the contrary, the phenyl group was found to have somewhat accelerative effect.