A nucleophilic substitution reaction in microemulsions based on either an alcohol ethoxylate or a sugar surfactant

A nucleophilic substitution reaction between 4-tert-butylbenzyl bromide and a series of iodide salts has been performed in oil-in-water microemulsions based on either a fatty alcohol ethoxylate or a sugar surfactant. The reaction kinetics was compared with the kinetics of the same reaction performed in a microhomogeneous reaction medium, d-MeOH. Previous results showing a particularly high reactivity in the microemulsion based on the fatty alcohol ethoxylate was confirmed. It was shown that in both microemulsions the reaction rate was almost independent of the choice of counterion to iodide. This indicates that complexation of the cation with the surfactant headgroup, which, in particular, could have taken place with surfactants containing oligooxyethylene chains (a “crown ether effect”), seems not to be of importance.

¹²⁷I NMR studies, as well as quadrupole splitting experiments performed by ²H NMR, indicate that there is a certain accumulation of iodide at the oil–water interface of the microemulsions. It is difficult to draw any quantitative conclusions in this respect, however.

The results obtained in this study, combined with results from previous investigations of the same reaction, indicate that the unexpectedly high reactivity obtained in the microemulsion based on a surfactant containing an oligooxyethylene headgroup is most probably due to the nucleophile being poorly solvated when present in the headgroup layer of such a microemulsion. Poorly solvated anions are known to be highly reactive nucleophiles.     

Algorithms for non-linear huber estimation

The Huber criterion for data fitting is a combination of thel ₁ and thel ₂ criteria which is robust in the sense that the influence of wild data points can be reduced. We present a trust region and a Marquardt algorithm for Huber estimation in the case where the functions used in the fit are non-linear. It is demonstrated that the algorithms converge under the usual conditions.     

Glottal airflow and transglottal air pressure measurements for male and female speakers in soft, normal, and loud voice

Measurements on the inverse filtered airflow waveform (the "glottal waveform") and of estimated average transglottal pressure and glottal airflow were made from noninvasive recordings of productions of syllable sequences in soft, normal, and loud voice for 25 male and 20 female speakers. Statistical analyses showed that with change from normal to loud voice, both males and females produced loud voice with increased pressure, accompanied by increased ac flow and increased maximum airflow declination rate. With change from normal voice, soft voice was produced with decreased pressure, ac flow and maximum airflow declination rate, and increased dc and average flow. Within the loudness conditions, there was no significant male-female difference in air pressure. Several glottal waveform parameters separated males and females in normal and loud voice. The data indicate higher ac flow and higher maximum airflow declination rate for males. In soft voice, the male and female glottal waveforms were more alike, and there was no significant difference in maximum airflow declination rate. The dc flow did not differ significantly between males and females. Possible relevance to biomechanical differences and differences in voice source characteristics between males and females and across loudness conditions is discussed.     

Heterogemini Surfactants Based on Fatty Acid Synthesis and Interfacial Properties

A series of novel nonionic surfactants based on fatty acids, each with two hydrophilic and two hydrophobic groups in the molecule (so-called Gemini surfactants), have been synthesized. The hydrophobic part of the surfactant, made from oleylnitrile, has a double bond in the middle of the chain to which the hydrophilic part is attached. One of the hydrophilic groups is a methyl-capped polyoxyethylene chain with 11 or 16 oxyethylene units, whereas the other is a secondary hydroxyl group. The reason for using the nitrile derivative of the fatty acid instead of a more conventional derivative such as an ester or amide is to achieve good hydrolytic stability, which is often demanded for cleaning applications. The cmc values of the surfactants were determined to be 0.2 and 0.4 mM for NIHG550 and NIHG750, respectively, using tensiometry and fluorescence. Pulsed-field gradient spin-echo NMR measurements gave similar but slightly higher values. The micelle size of NIHG750 was estimated to be on the order of 40 ?, as calculated from the self-diffusion coefficient. The dynamic surface tension, gamma(t), was measured in the range 1 ms-1 s using a maximum bubble pressure instrument and analyzed in terms of asymptotic solutions to the Ward and Tordai equation. The results suggest that at the beginning the adsorption is essentially diffusion-controlled. However, close to equilibrium, the DST decays are not consistent with a diffusion-controlled adsorption mechanism. One important result from the present work is that the heterogeminis seem to align better than conventional surfactants at the air-liquid and solid-liquid interfaces. Copyright 2001 Academic Press.     

Quality assurance and statistical control

In scientific research laboratories it is rarely possible to use quality assurance schemes, developed for large-scale analysis. Instead methods have been developed to control the quality of modest numbers of analytical results by relying on statistical control: Analysis of precision serves to detect analytical errors by comparing thea priori precision of the analytical results with the actual variability observed among replicates or duplicates. The method relies on the chi-square distribution to detect excess variability and is quite sensitive even for 5–10 results. Interference control serves to detect analytical bias by comparing results obtained by two different analytical methods, each relying on a different detection principle and therefore exhibiting different influence from matrix elements; only 5–10 sets of results are required to establish whether a regression line passes through the origo. Calibration control is an essential link in the traceability of results. Only one or two samples of pure solid or aqueous standards with accurately known content need to be analyzed. Verification is carried out by analyzing certified reference materials from BCR, NIST, or others; their limited accuracy of 5–10% make them less suitable for calibration purposes.     

Phase-transfer agents as catalysts for a nucleophilic substitution reaction in microemulsions

The reaction between 4-tert-butylbenzyl bromide and potassium iodide was carried out in microemulsions based on different nonionic surfactants, and the reaction rates were compared with those obtained in two-phase systems with added phase-transfer agent, either a quaternary ammonium salt or a crown ether. The reactions were relatively fast in the microemulsions and extremely sluggish in the two-phase systems without additional phase-transfer agent. Addition of a phase-transfer agent did not accelerate the reaction when a hydrocarbon was used as organic solvent, neither in the two-phase system nor in the microemulsion. When a chlorinated hydrocarbon was used as solvent, phase-transfer catalysis became effective and the rate obtained in the two-phase system with an equimolar amount of phase-transfer agent added was higher than that obtained in the microemulsion. When a catalytic amount of phase-transfer agent was used, the rate in the two-phase system was about the same as the rate obtained in the microemulsion without the phase-transfer agent. The combined approach, that is, use of a microemulsion as the reaction medium and addition of a phase-transfer agent, gave the highest reaction rate. The quaternary ammonium salt (tetrabutylammonium hydrogen sulfate) was a more efficient catalyst in the microemulsion system than the crown ether ([18]crown-6).     

Analysis of proteins from a glioma cell line by using micro-scale solution isoelectric focusing in combination with liquid chromatography/tandem mass spectrometry

In this study we have investigated whether micro-solution isoelectric focusing (microsol-IEF) can be used as a pre-fractionation step prior to liquid chromatography/tandem mass spectrometry (LC/MS/MS) and if extensive sample purification of the different fractions is required. We found that, in spite of the high concentrations of buffer and detergents, no clean up of the digested microsol-IEF fractions was necessary before analysis by LC/MS/MS. We also concluded that it is possible to identify at least twice as many proteins in a glioma cell lysate with the combination of microsol-IEF and LC/MS/MS than with LC/MS/MS alone. Furthermore, most of the proteins that were identified from one microsol-IEF fraction by using analytical narrow-range two-dimensional polyacrylamide gel electrophoresis (2D-PAGE) and peptide mass fingerprinting with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) were also identified by LC/MS/MS. Finally, we used the combination of microsol-IEF and LC/MS/MS to compare two sample preparation methods for glioma cells and found that several nuclear, mitochondria, and endoplasmic reticulum proteins were only present in the sample that had been subjected to lipid extraction by incubating the homogenized cells in chloroform/methanol/water.     

Sampling and metrology

The result of a measurement refers in principle only to the amount of substance actually contributing to the analytical signal. However, an appropriate definition of the measurand must include a specification of the system for which the result of the measurement should apply. All systems being inherently heterogeneous, representativity assumes importance for the metrological quality of a measurement, and the process needed to ascertain representativity is sampling. The contribution from this characteristic must be included when expressing the uncertainty of the reported value of the measurand. Representative sampling of systems that are infinite or non-uniform was developed by Pierre Gy in his Theory of Sampling. Finite systems can achieve uniformity by mechanical treatment and mixing; the heterogeneity of these systems can be characterized by a sampling constant, expressed in units of weight, for each particular species being determined. Examples of the contribution of sampling to the uncertainty of analytical results are discussed for some biological materials. Presented at the 2nd International Conference on Metrology – Trends and Applications in Calibration and Testing Laboratories, November 4–6, 2003, Eilat, Israel.     

Indirect determination of soluble trace elements in certified reference materials by neutron activation analysis

Since 1983 we have analyzedaqua regia extracts from environmental reference materials of 5 different soils and 4 different sludges by neutron activation analysis. Aqua regia as such is not accepted for irradiation in a nuclear reactor, and therefore the solution has to be evaporated to dryness, mixed and dried to constant weight before an aliquot can be taken and subjected to instrumental neutron activation analysis (INAA). Results for leachable Cr and Zn were found to display greater variability than results for total contents of these elements, and the reasons for this will be discussed.For the 1994 certification campaign for one soil and two sludges we have chosen to determine the total content of trace elements in these reference materials by INAA before and afteraqua regia leaching. The leachable contents are then found indirectly as a difference between the two results; in this way we eliminate the sources of uncertainty associated with the drying and handling of theaqua regia extracts, and we reduce the contributions from counting statistics.     

Dependence of the activity of a rhizopus lipase on microemulsion composition

Enzymatic hydrolysis of a model triglyceride, palm oil, was carried out with lipase fromRhizopus sp. in microemulsions with varying water content. The microemulsions were based on a nonionic surfactant, pentaethylene glycol monododecyl ether (C12 EO5), buffered water solution and an oil component consisting of isooctane and palm oil at a weight ratio of 20:1. The structure of the microemulsions was characterized using Fourier transform pulsed-gradient spin-echo¹H NMR. The rate of reaction decreased as the water content of the reaction medium was increased. The self-diffusion coefficient of water, D_w was found to be constant within the interval 1–20% water. The difference in reactivity is believed to be due to a difference in structure of the palisade layer between water and hydrocarbon microdomains. The nonionic surfactant was demonstrated to be unsuitable for enzymatic reactions since only partial hydrolysis was obtained in all experiments. The surfactant, however, did not cause enzyme deactivation, even at very high concentrations.