Immiscibility,upper critical solution temperature,and miscibility in blends of poly(vinyl ether)s with polyacrylics: Effects of pendant groups

Various phase behavior of blends of poly(vinyl ether)s with homologous acrylic polymers (polymethacrylates or polyacrylates) were examined using differential scanning calorimetry, optical microscopy (OM), and Fourier‐transformed infrared spectroscopy. Effects of varying the pendant groups of either of constituent polymers on the phase behavior of the blends were analyzed. A series of interestingly different phase behavior in the blends has been revealed in that as the pendant group in the acrylic polymer series gets longer, polymethacrylate/poly(vinyl methyl ether) (PVME) blends exhibit immiscibility, upper critical solution temperature (UCST), and miscibility, respectively. This study found that the true phase behavior of poly(propyl methacrylate)/PVME [and poly(isopropyl methacrylate)/PVME)] blend systems, though immiscible at ambient, actually displayed a rare UCST upon heating to higher temperatures. Similarly, as the methyl pendant group in PVE is lengthened to ethyl (i.e., PVME replaced by PVEE), phase behavior of its blends with series of polymethacrylates or polyacrylates changes correspondingly. Analyses and quantitative comparisons on four series of blends of PVE/acrylic polymer were performed to thoroughly understand the effects of pendant groups in either polyethers (PVE's) or acrylic polymers on the phase behavior of the blends of these two constituents. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1521–1534, 2007     

Mechanism of sorption of phenols from aqueous solutions onto surfactant-modified montmorillonite

Equilibrium and kinetic studies on the sorption of phenol, m-nitrophenol (m-NP), and o-cresol from water onto montmorillonite modified with cetyltrimethylammounium bromide (CTAB) were conducted. Experiments were carried out as a function of solution pH, sorbate concentration, and temperature (25-55 degrees C). It was shown that the sorption capacity decreased in the order phenol>o-cresol>m-NP. The Langmuir, dual-mode sorption, and Redlich-Peterson models were tested to fit the sorption isotherms of single-solute systems, whereas the Langmuir competitive model was used to describe bisolute sorption equilibria. Thermodynamic parameters (DeltaH degrees and DeltaS degrees ) and the mean free energy (E) for the sorption of phenols were determined from the temperature dependence of the distribution constant and the Dubinin-Radushkevick equation, respectively. A simplified kinetic model was proposed to confirm the sorption mechanism.     

Determination of hydrolyzable tannins in the fruit of Terminalia chebula Retz. by high-performance liquid chromatography and capillary electrophoresis

A RP-HPLC method for determining fourteen components (gallic acid, chebulic acid, 1,6-di-O-galloyl-D-glucose, punicalagin, 3,4,6-tri-O-galloyl-D-glucose, casuarinin, chebulanin, corilagin, neochebulinic acid, terchebulin, ellagic acid, chebulagic acid, chebulinic acid, and 1,2,3,4,6-penta-O-galloyl-D-glucose) in the fruit of Terminalia chebula Retz. is described. The separation was achieved within 80 min using a binary gradient with mobile phases consisting of a pH 2.7 phosphoric acid solution and an 80% CH3CN solution. Capillary electrophoretic analyses were also attempted, and it was found that CZE (25 mM Na2B4O7, 5 mM NaH2PO4, pH 7.0) was an efficient method for the separation of gallotannins, while an MEKC method (25 mM Na2B4O7, 5 mM NaH2PO4, 20 mM SDS, pH 7.0, and 10% acetonitrile) provided a better separation for most of the tannins examined. The HPLC and CE methods developed were both successfully applied to the assay of tannins in commercial samples of Chebulae Fructus.     

Studies of Coumarin Derivatives for Constitutive Androstane Receptor (CAR) Activation

Constitutive androstane receptor (CAR) activation has found to ameliorate diabetes in animal models. However, no CAR agonists are available clinically. Therefore, a safe and effective CAR activator would be an alternative option. In this study, sixty courmarin derivatives either synthesized or purified from Artemisia capillaris were screened for CAR activation activity. Chemical modifications were on position 5,6,7,8 with mono-, di-, tri-, or tetra-substitutions. Among all the compounds subjected for in vitro CAR activation screening, 6,7-diprenoxycoumarin was the most effective and was selected for further preclinical studies. Chemical modification on the 6 position and unsaturated chains were generally beneficial. Electron-withdrawn groups as well as long unsaturated chains were hazardous to the activity. Mechanism of action studies showed that CAR activation of 6,7-diprenoxycoumarin might be through the inhibition of EGFR signaling and upregulating PP2Ac methylation. To sum up, modification mimicking natural occurring coumarins shed light on CAR studies and the established screening system provides a rapid method for the discovery and development of CAR activators. In addition, one CAR activator, scoparone, did showed anti-diabetes effect in db/db mice without elevation of insulin levels.     

Effects of exchanged surfactant cations on the pore structure and adsorption characteristics of montmorillonite

Ca-montmorillonite (Ca-Mont) was exchanged with two quaternary amines, tetramethylammonium (TMA) chloride and hexadecyltrimethylammonium (HDTMA) bromide, to study the surfactant ion exchange effect on the pore structure, surface characteristics, and adsorption properties of montmorillonite. The revolution of both the surface area and pore structure of montmorillonite was characterized based on classical and fractal analyses of the nitrogen isotherms as well as the XRD patterns. The change of surface characteristics was identified from FTIR patterns and zeta-potential plots. The adsorption isotherms of acid dye, Amido Naphthol Red G (AR1), were then measured to identify the effects of the ion-exchange process on the adsorption properties of montmorillonite. It was found that the exchange processes might induce an increase or decrease in the surface area, pore size, pore volume, and surface fractal dimension D of montmorillonite, depending on the size, the molecular arrangement, and the degree of hydration of the exchanged ion in the clay. On the other hand, it was also found that the hydrophobic bonding by conglomeration of large C(16) alkyl groups associated with HDTMA could cause positive charge development on the surface of montmorillonite, which was not observed for TMA-modified montmorillonite (TMM). The effects of the alteration of the surface characteristics of montmorillonites on their adsorption selectivity for acid dye were discussed.     

The effects of hydrogen plasma pretreatment on the formation of vertically aligned carbon nanotubes

The effects of H₂ plasma pretreatment on the growth of vertically aligned carbon nanotubes (CNTs) by varying the flow rate of the precursor gas mixture during microwave plasma chemical vapor deposition (MPCVD) have been investigated in this study. Gas mixture of H₂ and CH₄ with a ratio of 9:1 was used as the precursor for synthesizing CNTs on Ni-coated TiN/Si(1 0 0) substrates. The structure and composition of Ni catalyst nanoparticles were investigated by using scanning electron microscopy (SEM) and cross-sectional transmission electron microscopy (XTEM). Results indicated that, by manipulating the morphology and density of the Ni catalyst nanoparticles via changing the flow rate of the precursor gas mixture, the vertically aligned CNTs could be effectively controlled. The Raman results also indicated that the intensity ratio of the G and D bands (I_D/I_G) is decreased with increasing gas flow rate. TEM results suggest H₂ plasma pretreatment can effectively reduce the amorphous carbon and carbonaceous particles and, thus, is playing a crucial role in modifying the obtained CNTs structures.     

Continuous-time bilinear system identification using single experiment with multiple pulses

A novel method is presented for the identification of a continuous-time bilinear system from the input?Coutput data generated by a single experiment with multiple pulses. In contrast to the conventional approach utilizing multiple experiments, the current work documents the advantage of using a single experiment and sets up a procedure to obtain bilinear system models. The special pulse inputs employed by earlier research can be avoided and accurate identification of the continuous-time system model is possible by performing a single experiment incorporating a class of control input sequences combining pulses with free-decay response. The algorithm presented herein is more attractive in practice for the identification of bilinear systems. Numerical examples presented demonstrate the methodology developed in the paper.     

Synthesis of a benzoxazine with precisely two phenolic OH linkages and the properties of its high‐performance copolymers

A phenolic OH‐containing benzoxazine ( F‐ap ), which cannot be directly synthesized from the condensation of bisphenol F, aminophenol, and formaldehyde by traditional procedures, has been successfully prepared in our alternative synthetic approach. F‐ap was prepared by three steps including (a) condensation of 4‐aminophenol and 5,5'‐methylenebis(2‐hydroxybenzaldehyde) (1) , (b) reduction of the resulting imine linkage by sodium borohydride, and (c) ring closure condensation by formaldehyde. The key starting material, (1) , was prepared from 2‐hydroxybenzaldehyde and s‐trioxane in the presence of sulfuric acid. F‐ap is structurally similar to bis(3,4‐dihydro‐2H‐3‐phenyl‐1,3‐benzoxazinyl)methane ( F‐a, a commercial benzoxazine based on bisphenol F/aniline/formaldehyde) except for two phenolic OHs. The phenolic OHs can provide reaction sites with epoxy and 1,1'‐(methylenedi‐p‐phenylene)bismaleimide (BMI). The structure–property relationships between the thermosets of F‐ap /epoxy, F‐a /epoxy, F‐ap /BMI, and F‐a /BMI were discussed. Experimental data showed that thermosets based on F‐ap /epoxy and F‐ap /BMI provided much better thermal properties than those based on F‐a /epoxy and F‐a /BMI. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2686–2694