Spectral enhancement of Polish vowels to improve their identification by hearing impaired listeners

Abnormalities in the cochlear function usually cause broadening of the auditory filters which reduces the speech intelligibility. An attempt to apply a spectral enhancement algorithm has been undertaken to improve the identification of Polish vowels by subjects with cochlear-based hearing-impairment. The identification scores of natural (unprocessed) vowels and spectrally enhanced (processed) vowels has been measured for hearing-impaired subjects. It has been found that spectral enhancement improves vowel scores by about 10% for those subjects, however, a wide variation in individual performance among subjects has been observed. The overall vowels identification scores obtained were 85% for natural vowels and 96% for spectrally enhanced vowels.     

Mechanical properties of metallic ribbons investigated by depth sensing indentation technique

The paper presents mechanical properties of two kinds of Co-based and one Fe-based metallic ribbons by the depth sensing indentation (DSI) technique. Investigations were carried out on two kinds ternary alloy Co₇₇Si_11,5B_11,5 and Fe₇₈Si₁₃B₉ and multicomponent Co₆₈Fe₄Mo₁Si_13,5B_13,5, which are so-called “zero-magnetostriction” materials. Metallic ribbons were investigated in amorphous state and partially crystallized state after annealing in 400°C in argon atmosphere. Heating of ribbons obtained by melt spinning technique was performed to check its effect on changes of mechanical properties.     

Dendrimeric Gd(III) complex of a monophosphinated DOTA analogue: optimizing relaxivity by reducing internal motion

A marked increase of relaxivity has been observed upon rigidifying the internal frame of Gd-containing PAMAM dendrimers: the effect has been attained by either protonation of the dendrimer or by forming supramolecular adducts with cationic polyaminoacids.     

Light- and temperature-assisted spin state annealing: accessing the hidden multistability

Among responsive multistable materials, spin crossover (SCO) systems are of particular interest for stabilizing multiple spin states with various stimulus inputs and physical outputs. Here, in a 2D Hofmann-type coordination polymer, [Fe(isoq)₂{Au(CN)₂}₂] (isoq = isoquinoline), a medium-temperature annealing process is introduced after light/temperature stimulation, which accesses the hidden multistability of the spin state. With the combined effort of magnetic, crystallographic and Mössbauer spectral investigation, these distinct spin states are identified and the light- and temperature-assisted transition pathways are clarified. Such excitation-relaxation and trapping-relaxation joint mechanisms, as ingenious interplays between the kinetic and thermodynamic effects, uncover hidden possibilities for the discovery of multistable materials and the development of multistate intelligent devices.

Two new two-stage manipulation protocols, namely light- and temperature-assisted spin state annealing (LASSA/TASSA), are applied to a spin crossover coordination polymer, [Fe(isoq)₂{Au(CN)₂}₂], revealing the hidden multistability of spin states.     

X‐ray investigations of bicyclic α‐methylene‐δ‐valerolactones. V. (4aS,7R,8aR)‐7‐Isopropenyl‐4a‐methyl‐3‐methyleneperhydrochromen‐2‐one

The title compound, C₁₄H₂₀O₂, adopts a conformation in which the δ‐valerolactone and cyclohexane rings are almost coplanar with one another. The γ‐methyl substituent occupies an axial position with respect to the cyclohexane ring. The δ‐valerolactone moiety adopts an envelope arrangement, while the cyclohexane ring exists in a chair conformation.     

Propagating transverse electric and transverse magnetic modes in liquid crystal-clad planar waveguides

ABSTRACT

In a planar dielectric waveguide, weak confinement of a propagating mode in a high index core leads to a measurable evanescent interaction with the cladding. In this work, we study the effect of a reorientable anisotropic cladding on the behaviour of Transverse Electric (TE) and Transverse Magnetic (TM) mode polarisations using a liquid crystal (LC)-clad waveguide architecture. The polarised evanescent field of a guided mode interacts with a voltage-tunable birefringent LC cladding to deflect an out-coupled beam. Experimental measurements are coupled with a theoretical framework and show good consistency with simulation results. We isolate the effect of mode confinement by changing the thickness of the high index core. Interactions between the LC index ellipsoid and the mode polarisation are probed by changing the initial alignment of the LC. Finally, we examine the difference in deflection between TE and TM modes, which incorporates both a change in mode confinement and a difference in LC index components.     

Enhancement of dielectric and electro-optical parameters of a newly prepared ferroelectric liquid crystal mixture by dispersing nano-sized copper oxide

ABSTRACT

Here, we present the effect of copper (II) oxide nanoparticles (nCuO) on dielectric and electro-optical parameters of a newly prepared ferroelectric liquid crystal (FLC) mixture, namely W302. The FLC mixture, comprising of pyrimidine compounds, was characterised through dielectric spectroscopy, differential scanning calorimetry (DSC), polarising optical microscopy (POM) and other electro-optical methods. The material parameters such as spontaneous polarisation, rotational viscosity, response time and tilt angle of W302 were found to be 14 nC/cm², 240 mPa.s, 150 µs and 28^?, respectively. The phase transition temperatures of W302 were observed through DSC and further confirmed by the dependence of dielectric loss factor in homogeneously aligned FLC sample with temperature. We also demonstrate the observance of a low-frequency dielectric relaxation mode due to the unwinding of the helix, called as partially unwound helical mode (p-UHM) along with Goldstone mode. The behaviour of p-UHM has been systematically studied with temperature and applied bias field. Further, dispersion of nCuO into host W302 has shown a significant increase in dielectric permittivity. Also, the p-UHM relaxation peak in the dielectric regime has disappeared with the incorporation of nCuO. These studies would be useful to fabricate better electro-optical devices for display, switching and beam steering applications. The formulation and characterization of a ferroelectric liquid crystal (FLC) mixture W302 composed of pyrimidine compounds is presented. Then, we observed the effect of copper (II) oxide nanoparticles (nCuO) on dielectric and electro-optical parameters of a newly prepared and characterized FLC mixture.     

Utilization of cleavage of the [1]benzofuro[2,3‐e][1,2,4]triazine ring for the synthesis of oxygen,nitrogen and sulfur derivatives of [1,2,4]triazine

A series of 6‐azacytosines 4a‐4k and 5a‐5c were prepared by nucleophilic cleavage of furan ring of [1]benzofuro[2,3‐e][1,2,4]triazine derivative 1 . Some of them were used for the preparation of derivatives of [1,2,4]triazolo[4,3‐d][1,2,4]triazine ( 6a‐6d ) and tetrazolo[1,5‐d][1,2,4]triazine (7). The reaction of 1 with hydrogen sulfide afforded the corresponding 6‐(2‐hydroxyphenyl)‐2‐phenyl‐5‐thioxo‐4,5‐dihydro‐1,2,4‐tri‐azin‐3(2H)‐one ( 8 ), while with hydrogen selenide 6‐(2‐hydroxyphenyl)‐2‐phenyl‐4,5‐dihydro‐1,2,4‐triazin‐3(2H)‐one ( 9 ) was formed. The prepared compounds were tested for biological activity.     

Influence of Al2O3 Nanoparticles on the Thermal Stability of Ultra-Fine Grained Copper Prepared by High Pressure Torsion

Summary.  Ultra-fine grained (UFG) Cu (grain size 80 nm) containing 0.5 wt.% Al₂O₃ nanoparticles (size 20 nm) was prepared by high pressure torsion (HPT). Positron lifetime spectroscopy was employed to characterize the microstructure of this material, especially with respect to types and concentration of lattice defects. The evolution of microstructure with increasing temperature was studied by positron lifetime spectroscopy and X-ray diffraction measurements. The thermal stability of the Cu + 0.5 wt.% Al₂O₃ nanocomposite was compared with that of pure UFG Cu prepared by the same technique. The processes taking place during thermal recovery of the initial nanoscale structure in both studied materials are described. Received October 5, 2001. Accepted (revised) December 20, 2001