Studies with inorganic precipitate membranes. III. Consideration of energetics of electrolyte permeation through membranes

The permeability of various electrolytes through parchment-supported ferrocyanide membranes of manganese, cobalt, silver, and cadmium has been measured at 10, 15, 20, 25, and 30°C. The order of permeability at a given temperature was Cl^- > NO₃^- > CNS^- > CH₃COO^- > SO₄^2- for both monovalent and divalent cations. For any given anion, the cations followed the sequence NH₄⁺ > Li⁺ > Ba²⁺ > Ca²⁺ > Mg²⁺ > Al³⁺. This sequence has been correlated with the size of the hydrated ion. Further, the data have been considered from the standpoint of the theory of rate processes and the values for the entropy of activation (ΔS′) have been derived assuming an equilibrium distance of 3 Å in the membrane. The values of ΔS′ were all negative and decreased with increasing valence of the ions. This was interpreted to mean electrolyte permeation with partial immobilization in the membrane.     

Degradation of chlorinated polyethylene. I. Effect of antimony oxide on the rate of dehydrochlorination

The degradation of two chlorinated polyethylene compounds CPE 25 (45% chlorine) and CPE 16 (36% chlorine) was studied by following their rates of dehydrochlorination at two temperatures, 150°C and 180°C in pure nitrogen and pure oxygen atmospheres. Studies on the powdered polymers showed that the dehydrochlorination rate of CPE 25 is about fourteen times faster than that of CPE 16 in nitrogen atmospheres and only three to four times faster in oxygen. The molded polymers gave a lower rate of dehydrochlorination than when in the powdered form. This effect is attributed to diffusion factors. The antimony oxide brought about an induction period in the dehydrochlorination reaction during which only a small amount of HCl is evolved, followed by a very fast rate of dehydrochlorination both in oxygen and nitrogen atmospheres. The duration of the induction period increases with increase in the Sb₂O₃ concentration, but is followed by an accelerated HCl loss which is faster when Sb₂O₃ concentration is higher. This work provides supporting evidence that SbCl₃ was formed and lost during degradation. Mechanisms of dehydrochlorination are suggested for the reaction in the case of pure chlorinated polyethylene and for the polymer containing antimony oxide.     

Kinetics and mechanism of reaction between mercuric bromide and silver iodide in solid state

Kinetics and mechanism of the reaction between mercuric bromide and silver iodide were studied in the solid state. It has been established that HgBr₂ reacts via the gaseous state and that the reaction proceeds through counter diffusion of Ag⁺ and Hg²⁺. Thermal and conductivity measurements indicate that the reaction is multistep. X-ray and chemical analyses show that HgBr₂ and AgI mixed in different molar ratios give rise to different products. The data for the lateral diffusion fitted the equation X_iⁿ = kt, where X_i is the thickness of the product layer at time t, and n and k are constants. Evidence for the formation of solid solutions between reactant and product phases is reported.     

Exact Solution of a(2+1)-Dimensional Anisotropic Star in Finch and Skea Spacetime

We provide a new class of interior solution of a(2+1)-dimensional anisotropic star in Finch and Skea spacetime corresponding to the BTZ black hole. We develop the model by considering the MIT bag model EOS and a particular ansatz for the metric function grrproposed by Finch and Skea [M.R. Finch and J.E.F. Skea, Class. Quantum.Grav. 6(1989) 467]. Our model is free from central singularity and satisfies all the physical requirements for the acceptability of the model.     

Enantioselective and Regiodivergent Functionalization of N‐Allylcarbamates by Mechanistically Divergent Multicatalysis

A pair of mechanistically divergent multicatalytic reaction sequences has been developed consisting of nickel‐catalyzed isomerization of N‐allylcarbamates and subsequent phosphoric‐acid‐catalyzed enantioselective functionalization of the resulting intermediates. By appropriate selection of reaction partners, in situ generated imines and ene‐carbamates are mechanistically partitioned to yield opposing functionalized products. Formal α‐functionalization to give protected α‐arylamines is achieved upon enantioselective Friedel–Crafts reaction with arene nucleophiles, whereas formal β‐functionalization is achieved upon reaction with diarylimine electrophiles in an enantioselective Povarov‐[4+2] cycloaddition.     

Analytical QbD-based systematic bioanalytical HPLC method development for estimation of quercetin dihydrate

The current work entails development of rapid, sensitive, and inexpensive high-performance liquid chromatographic method of quercetin dihydrate using the quality by design approach. Quality target method profile was defined and critical analytical attributes (CAAs) were earmarked. Chromatographic separation was accomplished on a C₁₈ column using acetonitrile and ammonium acetate buffer (35:65) %v/v (containing 0.1% acetic acid, pH 3.5) as mobile phase at 0.7?mL/min flow rate with UV detector at 237?nm. Screening studies using fractional factorial design revealed that organic modifier, injection volume, column temperature, and buffer strength have significant influence on method CAAs, namely, peak area, retention time, and peak tailing. The critical method parameters were systematically optimized using Box–Behnken design. Response surface mapping was used along with numerical optimization and desirability function for identifying the optimal chromatographic conditions. Linearity was observed in the drug concentration ranging between 2 and 50?µg/mL. Accuracy analysis revealed mean % recovery between 93.6 and 96.2%, while precision study revealed mean % recovery between 93.7 and 96.5%. Limits of detection and quantification of the developed method were found to be 12.1 and 36.6?ng/mL. Overall, the studies construed successful development of chromatographic method of quercetin with enhanced method performance.     

Reversible Immobilization of Urease by Using Bacterial Cellulose Nanofibers

In this work, bacterial cellulose nanofibers were produced by using the Gluconacetobacter hansenii HE1 strain. These nanofibers were derivatized with dye affinity ligand Reactive Green 5, and these newly synthesized dye-attached nanofibers were used for affinity adsorption of urease. Reactive Green 5-attached nanofibers were characterized by Fourier transform infrared spectroscopy, SEM, and energy-dispersive x-ray spectroscopy analysis. Some adsorption conditions which significantly affect the adsorption efficiency were investigated. The maximum urease adsorption capacity was found to be 240 mg/g nanofiber in pH 6.0 and at room temperature. Dye-free plain nanofibers also used for studying nonspecific urease adsorption onto plain nanofibers and nonspecific adsorption were found to be negligible (3.5 mg/g nanofiber). Prepared dye-attached nanofibers can be used in five successive adsorption/desorption steps without any decrease in their urease adsorption capacity. The desorption rate of the adsorbed urease was found to be 98.9 %. The activity of the urease was also investigated, and it was found that free and desorbed urease from the dye-attached nanofibers showed similar specific activity.     

Synthesis and Assessment of Two Malonyl Dihydrazide Derivatives as Corrosion Inhibitors for Carbon Steel in Acidic Media: Experimental and Theoretical Studies

Despite the extensive use of carbon steel in all industrial sectors, particularly in the petroleum industry, its low corrosion resistance is an ongoing problem for these industries. In the current work, two malonyl dihydrazide derivatives, namely 2,2’-malonylbis (N-phenylhydrazine-1-carbothiamide (MBC) and N’1, N’3-bis(-2-hydroxybenzylidene) malonohydrazide (HBM), were examined as inhibitors for the carbon steel corrosion in 1.0 M HCl. Both MBC and HBM were characterised using thin-layer chromatography, elemental analysis, infrared spectroscopy, and nuclear magnetic resonance techniques. The corrosion tests were performed using mass loss measurements, polarisation curves, and electrochemical impedance spectroscopy. It is obtained from the mass loss studies that the optimal concentration for both inhibitors is 2.0 × 10⁻⁵ mol/L, and the inhibition efficiencies reached up to 90.7% and 84.5% for MBC and HBM, respectively. Electrochemical impedance spectroscopy (EIS) and potentiodynamic polarisation (PDP) indicate an increased impedance in the presence of both MBC and HBM and mixed-type inhibitors, respectively. Both inhibitors can mitigate corrosion in the range of 298–328 K. Values of free energy changes obtained from the Langmuir model suggest that the inhibitors suppress the corrosion process principally by chemisorption. The computational investigations were conducted to identify the factors connected with the anti-corrosive properties of the examined inhibitors.