Structural and Optical Properties of Zinc Nitride Films Prepared by Pulsed Filtered Cathodic Vacuum Arc Deposition

Polycrystalline zinc nitride films are deposited on Coming 7059 glass substrates by pulsed filtered cathodic vacuum arc deposition （PFCVAD）. The crystallographic structure is studied by means of x-ray diffraction. These measurements show that all the films are crystallized in the cubic structure, in a preferred orientation along the （332） and （631） directions. Weak XRD signal shows small crystallites distributed in an amorphous tissue. A small improvement of crystallinity is observed with annealing. Optical parameters such as absorption, energy band gap, Urbach tail, extinction coefficients have been determined. The Urbach tail energy is decreased with annealing at 500℃ for one hour. Energy band gap values are found to be increased by annealing.     

Copper(II) complexes with pyridine-2,6-dicarboxylic acid from the oxidation of copper(I) iodide

Via an oxidation reaction of Cu(I) iodide with pyridine-2,6-dicarboxylic acid (H₂L) in DMF three copper(II) complexes, [(CH₃)₂NH₂]₂[CuL₂] (1), K₂[CuL₂]?H₂L?H₂O (2) and [Cu(L)(H₂O)]_n (3), were synthesized and characterized. The structures of 1–3 were determined by single crystal X-ray diffraction studies. In-situ DMF decomposition produces dimethylamine base under solvothermal conditions and a proton transfer reaction takes place for the complex formation of 1. 3-D networks are stabilized in 1 and 2 via hydrogen bonds. Complex 3 is a 1-D coordination polymer with Cu-O semi-coordination bonds. Thermal decomposition of the complexes results in the corresponding metal oxides. Also, the electrochemical behavior of 1 was determined to be a metal-centered and diffusion-controlled, one-electron reduction process.     

Quantitative Analysis of Acetazolamide in Solid Dosage Forms with 1H-Nmr Spectroscopy

A rapid and specific proton magnetic resonance spectroscopic method was developed for determining acetazolamide in tablets. Maleic acid was used as the internal standard and DMSO-d₆ served as the NMR solvent. the concentration of drug per unit dose was calculated from the integration values for the resonance signals of acetazolamide at 2.14 ppm and maleic acid at 6.20 ppm. the method using commercial products gave comparable results of those obtained by the method of USP XXIII.     

Determination of fumonisins B1 and B2 in corn by liquid chromatography/mass spectrometry with immunoaffinity column cleanup: single-laboratory method validation

A single-laboratory method validation was conducted to establish the effectiveness of an immunoaffinity column cleanup procedure followed by liquid chromatography/mass spectrometry (LCIMS) for the determination of fumonisins B1 and B2 (FBI + FB2) in corn. The test portion is extracted with acetonitrile-methanol-water (25 + 25 + 50). The extract is filtered, diluted with phosphate-buffered saline solution, and applied to an immunoaffinity column. FB1 + FB2 are removed with methanol and directly determined by reversed-phase LC with MS detection using selected-ion monitoring of 2 characteristic ions in each case. Test portions of blank corn samples were spiked with a mixture of FB1 + FB2 to give total levels of 200 and 500 ng/g, respectively. Recoveries of both FB1 and FB2 from spiked samples averaged 90.4-101%. Based on results for spiked raw corn (triplicates at 2 levels), the relative standard deviation for repeatability ranged from 2.8 to 7.1%. The accuracy of the method was demonstrated by analysis of Food Analysis Performance Assessment Scheme (FAPAS) test material. The method was also applied to a small survey of processed corn products such as corn chips, cornflakes, and popcorn.     

A generic method for the determination of acrylamide in thermally processed foods

A generic sample preparation method for the determination of acrylamide in foods was developed. The method entails extraction with methanol, purification with Carrez I and II solutions, evaporation and solvent change to water, and cleanup with Oasis HLB solid-phase extraction (SPE) cartridge. The final extract was analyzed by liquid chromatography-mass spectrometry (LC-MS) for quantitation. The chromatographic separation was performed on ODS-3 column using the isocratic mixture of 0.01 mM acetic acid in 0.2% aqueous solution of formic acid at a flow rate of 0.6 ml/min at 25 degrees C. The recoveries of acrylamide from potato chips, biscuits and coffee ranged between 92.8 and 101.5% with relative standard deviations of 4.1% or less. The limit of detection (LOD) and the limit of quantitation (LOQ) were 2 ng/g and 6 ng/g in the basis of signal to noise ratios of 3:1 and 9:1, respectively.     

Coupled Turbulent Flow Chromatography: LC–MS/MS Method for the Analysis of Pesticide Residues in Grapes, Baby Food and Wheat Flour Matrices

This paper describes an on-line sample preparation method for the simultaneous determination of 48 pesticides in grapes, baby food and wheat flour matrices. Target pesticides were selected to represent a wide variety of chemical structures and three typical matrices were selected. Turbulent flow chromatography was applied for on-line sample cleanup directly coupled to LC?CMS/MS. The aim of the method was to reduce total analysis time, eliminate manual laboratory work, provide clean extracts and achieve reproducible results. Single laboratory method validation was conducted establishing limits of detection between 0.8 and 6.0?ng?g^?1 for baby food, and 0.8?C10.3?ng?g^?1 for other matrices. Within-day precision values varied between 4 and 18?%, while between-day precisions were in the range 5?C22?%. Method recovery ranged from 67 to 124?%, and method accuracy was demonstrated by analysis of external quality control samples. The method was also tested on 24 different survey samples from both bio and organic origin. The method was shown to be convenient, fast and fit for purpose in meeting regulatory requirements for pesticide residue monitoring.     

Linear algebra students’ modes of reasoning: Geometric representations

Main goal of our research was to document differences on the types of modes linear algebra students displayed in their responses to the questions of linear independence from two different assignments. In this paper, modes from the second assignment are discussed in detail. Second assignment was administered with the support of graphical representations through an interactive web-module. Additionally, for comparison purposes, we briefly talk about the modes from the first assignment. First assignment was administered with the support of computational devices such as calculators providing the row reduced echelon form (rref) of matrices. Sierpinska’s framework on thinking modes (2000) was considered while qualitatively documenting the aspects of 45 matrix algebra students’ modes of reasoning. Our analysis revealed 17 categories of the modes of reasoning for the second assignment, and 15 categories for the first assignment. In conclusion, the findings of our analysis support the view of the geometric representations not replacing one’s arithmetic or algebraic modes but encouraging students to utilize multiple modes in their reasoning. Specifically, geometric representations in the presence of algebraic and arithmetic modes appear to help learners begin to consider the diverse representational aspects of a concept flexibly.     

Immunoaffinity column cleanup with liquid chromatography using post-column bromination for determination of aflatoxins in hazelnut paste: interlaboratory study

An interlaboratory study was conducted to evaluate the effectiveness of an immunoaffinity column cleanup liquid chromatography (LC) method for determination of aflatoxin B1 and total aflatoxins in hazelnut paste at European regulatory limits. The test portion was extracted with methanol-water (6 + 4). The extract was filtered, diluted with phosphate-buffered saline (PBS) solution to a specified solvent concentration, and applied to an immunoaffinity column containing antibodies specific to aflatoxins. The aflatoxins were removed from the immunoaffinity column with methanol, and then quantified by reversed-phase LC with post-column derivatization (PCD) involving bromination. The PCD was achieved with electrochemically generated bromine (Kobra Cell) followed by fluorescence detection (except for one participant who used pyridinum hydrobromide perbromide for bromination). Hazelnut paste, both naturally contaminated with aflatoxins and blank (<0.1 ng/g) for spiking by participants with aflatoxins, was sent to 14 collaborators in Belgium, The Netherlands, Spain, Turkey, the United Kingdom, and the United States. Test portions were spiked at levels of 4.0 and 10.0 ng/g for total aflatoxins by participants using supplied total aflatoxins standards. Recoveries for total aflatoxins and aflatoxin B1 averaged from 86 to 89%. Based on results for naturally contaminated samples (blind duplicates at 3 levels ranging from 4.0 to 11.8 ng/g total aflatoxins), the relative standard deviation for repeatability (RSDr) ranged from 2.3 to 3.4% for total aflatoxins and from 2.2 to 3.2% for aflatoxin B1. The relative standard deviation for reproducibility (RSD(R)) ranged from 6.1 to 7.0% for total aflatoxins and from 7.3 to 7.8% for aflatoxin B1. The method showed exceptionally good within-laboratory and between-laboratory precision for hazelnut paste, as evidenced by HORRAT values, which in all cases were significantly below target levels, the low levels of determination for both aflatoxin B1 and total aflatoxins.     

Potassium permanganate/carboxylic acid/organic solvent: a powerful reagent for enone oxidation and aryl coupling reactions

The α′-acetoxylation of enones and the α-acetoxylation of aromatic ketones were carried out with potassium permanganate and acetic acid, in which acetoxylation products were obtained in 74-96% yields. The same reaction was carried out with carboxylic acids other than acetic acid, which furnished corresponding acyloxy ketones with the same regioselectivity. For the first time, formyloxylation products were synthesized in a 61-85% yield by using formic acid. The potassium permanganate and acetic acid method was also used for aryl coupling reactions. The reaction of arylboronic acids and arylhydrazines in benzene with potassium permanganate and acetic acid in turn furnished biaryls in 85-96% yield. We have shown that potassium permanganate/carboxylic acid/organic solvent behaves as manganese(III) acetate.     

Rapid analysis of fungal cultures and dried figs for secondary metabolites by LC/TOF-MS

A liquid chromatography-time-of-flight mass spectrometry (LC/TOF-MS) method has been developed for profiling fungal metabolites. The performance of the procedure in terms of mass accuracy, selectivity (specificity) and repeatability was established by spiking aflatoxins, ochratoxins, trichothecenes and other metabolites into blank growth media. After extracting, and carrying out LC/TOF-MS analysis, the standards were correctly identified by searching a specially constructed database of 465 secondary metabolites. To demonstrate the viability of this approach 11 toxigenic and four non-toxigenic fungi from reference collections were grown on various media, for 7-14 days. The method was also applied to two toxigenic fungi, A. flavus (200-138) and A. parasiticus (2999-465) grown on gamma radiation sterilised dried figs, for 7-14 days. The fungal hyphae plus a portion of growth media or portions of dried figs were solvent extracted and analysed by LC/TOF-MS using a rapid resolution microbore LC column. Data processing based on cluster analysis, showed that electrospray ionization (ESI)-TOF-MS could be used to unequivocally identify metabolites in crude extracts. Using the elemental metabolite database, it was demonstrated that from culture collection isolates, anticipated metabolites. The speed and simplicity of the method has meant that levels of these metabolites could be monitored daily in sterilised figs. Over a 14-day period, levels of aflatoxins and kojic acid maximised at 5-6 days, whilst levels of 5-methoxysterigmatocystin remained relatively constant. In addition to the known metabolites expected to be produced by these fungi, roquefortine A, fumagillin, fumigaclavine B, malformins (peptides), aspergillic acid, nigragillin, terrein, terrestric acid and penicillic acid were also identified.