Electroreductive polymerization of trans-[RuCl 2(vpy) 4] on Nd-Fe-B magnets: electrochemical impedance spectroscopy interpretation, Raman spectroscopy, X-ray photoelectron spectroscopy and scanning electron microscopy analysis

The electropolymerization of trans-[RuCl₂(vpy)₄] (vpy=4-vinylpyridine) monomer on Nd-Fe-B magnets was studied by electrochemical impedance spectroscopy (EIS). Impedance diagrams obtained during the polymerization process were used to monitor film formation. The EIS results gave insight into the electrochemical phenomena occurring at the magnet surface as the polymerization process progressed. The film structure and morphology were also studied by X-ray photoelectron spectroscopy, scanning electron microscopy and Raman spectroscopy. The Raman spectroscopy results showed that the polymerization takes place at the vinyl groups of the monomer and also that the redox polymer structure is very similar to that of the monomer. The ratio of the intensity of the XPS peaks for fluorine (from the electrolyte PF₆ ^–) and ruthenium present in the film showed that the polymer on Nd-Fe-B contained an equal proportion of Ru²⁺ and Ru³⁺, indicating that part of the film is positively charged, i.e. {[RuCl₂(vpy)₄]⁺} _n .     

A Fully Integrated Continuous‐Flow System for Asymmetric Catalysis: Enantioselective Hydrogenation with Supported Ionic Liquid Phase Catalysts Using Supercritical CO2 as the Mobile Phase

A continuous‐flow process based on a chiral transition‐metal complex in a supported ionic liquid phase (SILP) with supercritical carbon dioxide (scCO₂) as the mobile phase is presented for asymmetric catalytic transformations of low‐volatility organic substrates at mild reaction temperatures. Enantioselectivity of >99 % ee and quantitative conversion were achieved in the hydrogenation of dimethylitaconate for up to 30 h, reaching turnover numbers beyond 100 000 for the chiral QUINAPHOS–rhodium complex. By using an automated high‐pressure continuous‐flow setup, the product was isolated in analytically pure form without the use of any organic co‐solvent and with no detectable catalyst leaching. Phase‐behaviour studies and high‐pressure NMR spectroscopy assisted the localisation of optimum process parameters by quantification of substrate partitioning between the IL and scCO₂. Fundamental insight into the molecular interactions of the metal complex, ionic liquid and the surface of the support in working SILP catalyst materials was gained by means of systematic variations, spectroscopic studies and labelling experiments. In concert, the obtained results provided a rationale for avoiding progressive long‐term deactivation. The optimised system reached stable selectivities and productivities that correspond to 0.7 kg L ^?1 h^?1 space–time yield and at least 100 kg product per gram of rhodium, thus making such processes attractive for larger‐scale application.     

Baeyer-Villiger oxidation in compressed CO2

The aerobic Baeyer-Villiger oxidation of a wide range of ketones, both cyclic and acyclic to the corresponding esters or lactones can be efficiently carried out in compressed carbon dioxide in the presence of an aldehyde as co-reductant.     

Highly enantioselective nickel-catalyzed hydrovinylation with chiral phosphoramidite ligands

Readily available chiral phosphoramidites are a promising class of ligands for nickel-catalyzed asymmetric hydrovinylation of vinyl arenes. Cooperative effects are operative when ligands with more than one element of chirality are used. Choosing the proper stereochemistry in each part of the modular ligand system leads to high chemoselectivities and excellent enantioselectivities up to 94%. Moreover, the catalysts derived from these ligands proved extremely efficient and remarkably robust performing up to 8300 catalytic turnovers at an initial turnover frequency beyond 1000 h-1. The large potential for structural variation and their straightforward synthesis make the phosphoramidites currently the best lead structure for catalyst development in this field.     

Increase of both order and disorder in the first hydration shell with increasing solute polarity

Monte?Carlo simulations of a small model solute in an aqueous solution are used to examine the effects of solute polarity on hydration structure. A judicious definition of the orientational order parameter leads to reinterpretation of the conventional picture of hydration. As the solute varies from hydrophobic to hydrophilic the ordered first shell water simultaneously fractionates into a more highly ordered and a more disordered component. The hydrogen-bond network rearranges such that the more ordered component relaxes to configurations of optimal intermolecular angles, the other fraction being released from the network.     

Continuous monitoring of dough fermentation and bread baking by magnetic resonance microscopy

The consumer quality of baked products is closely related with dough structure properties. These are developed during dough fermentation and finalized during its baking. In this study, magnetic resonance microscopy (MRM) was employed in a study of dough fermentation and baking. A small hot air oven was installed inside a 2.35-T horizontal bore superconducting magnet. Four different samples of commercial bread mixes for home baking were used to prepare small samples of dough that were inserted in the oven and allowed to rise at 33°C for 112 min; this was followed by baking at 180°C for 49 min. The entire process was followed by dynamic T₁-weighted 3D magnetic resonance imaging with 7 min of temporal resolution and 0.23×0.23×1.5 mm³ of spatial resolution. Acquired images were analyzed to determine time courses of dough pore distribution, dough volume and bread crust thickness. Image analysis showed that both the number of dough pores and the normalized dough volume increased in a sigmoid-like fashion during fermentation and decreased during baking due to the bread crust formation. The presented magnetic resonance method was found to be efficient in analysis of dough structure properties and in discrimination between different dough types.     

Ni‐Catalyzed Asymmetric Cycloisomerization of Dienes by Using TADDOL Phosphoramidites

A library of α,α,α,α‐tetraaryl‐1,3‐dioxolane‐4,5‐dimethanol (TADDOL)‐based phosphoramidites has been synthesized and applied in the Ni‐catalyzed cycloisomerization of different dienes. Through the systematic variation of the three structural motifs of the lead structure, that is, the amine moiety, the protecting group, and the aryl substituents, the ligand features could be optimized for the asymmetric cycloisomerization of the model substrate diethyl diallylmalonate. The substrate scope of the new catalytic system was extended to other diallylic substrates, including unsymmetrical dienes. Overall remarkably high activities of up to approximately 13 500 h^?1, very high selectivities toward five‐membered exo‐methylenecyclopentanes, and enantioselectivities of up to 92 % ee have been achieved.