Simultaneous Determination of Iron,Copper, and Cadmium by Adsorptive Stripping Voltammetry in the Presence of Thymolphthalexone

A novel, sensitive and selective adsorptive stripping procedure for simultaneous determination of iron, copper and cadmium is presented. The method is based on the adsorptive accumulation of thymolphthalexone (TPN) complexes of these elements onto a hanging mercury drop electrode, followed by reduction of adsorbed species by voltammetric scan using differential pulse modulation. The influences of control variables on the sensitivity of the proposed method for the simultaneous determination of iron, copper and cadmium were studied using the Derringer desirability function. The optimum analytical conditions were found to be TPN concentration of 2.0 μM, pH of 9.5, and accumulation potential at ?0.4 V vs. Ag/AgCl with an accumulation time of 60 s. The peak currents are proportional to the concentration of iron, copper and cadmium over the 1–80, 0.5–100 and 1–100 ng mL^?1 ranges with detection limits of 0.5, 0.4 and 0.9 ng mL^?1_, respectively. The R.S.D. at a concentration level of 20 ng mL^?1 of iron, copper and cadmium were 2.5%, 0.9% and 1.5% (n=6), respectively. The procedure was applied to the simultaneous determination of iron, copper and cadmium in the tap water and some synthetic samples with satisfactory results.     

An electropolymerized aniline-based fiber coating for solid phase microextraction of phenols from water

An aniline-based polymer was electrochemically prepared and applied as a new fiber coating for solid phase microextraction (SPME) of some priority phenols from water samples. The polyaniline (PANI) film was directly electrodeposited on the platinum wire surface in sulfuric acid solution using cyclic voltammetry (CV) technique. The efficiency of new coating was investigated using a laboratory-made SPME device and gas chromatography with flame ionization detection for the extraction of some phenols from the headspace of aqueous samples. The scanning electron microscopy (SEM) images showed the homogeneity and the porous surface structure of the film. The results obtained proved the ability of this polymer as a suitable SPME fiber coating for trapping the selected phenols. Influential parameters affecting the extraction process were optimized and an extraction time of 50 min at 50 °C gave maximum efficiency, when the aqueous sample was saturated with NaCl and adjusted at pH 2. This new coating can be prepared easily in a reproducible manner and it is rather inexpensive and stable against most of organic solvents. The PANI thickness can be precisely controlled by the number of CV cycles. At the optimum conditions, the R.S.D. for a double distilled water spiked with phenol and chlorophenols at ppb level were 4.8-17% (n = 3) and detection limits for the studied compounds were between 0.69 and 3.7 ng ml⁻¹, except for phenol and 4-chlorophenol. The optimized method was successfully applied to some real-life water samples.     

Functionalization of BN nanosheet with N2H4 may be feasible in the presence of Stone–Wales defect

Following recent experimental works, herein we investigated chemical functionalization of a BN graphene-like sheet with hydrazine (N₂H₄) molecule based on the density functional theory. We found that the functionalization of the pristine sheet is not possible; while the presence of some structural defects such as Stone–Wales is essential to make it feasible. Functionalization energy of the defected sheet is calculated to be in the range of ?6.1 to ?7.4 kcal/mol at B3LYP/6-31G (d) level. Based on the obtained results, the functionalized BN sheet is found to be more soluble in water in comparison with the pristine sheet which is in good agreement with previous experimental reports. Also, it was found that the electronic properties of the defected sheet are slightly changed upon the chemical functionalization.     

A Theoretical Study of OH and OCH3 Free Radical Adsorption on a Nanosized Tube of BC2N

By using density functional theory calculations, we have investigated the adsorption of OH and OCH₃ free radicals on a BC₂N nanotube based on the energetic, electronic and geometric properties. The adsorption of radicals on the top of a B atom is more favorable than that on the other sites and reaction energies have been calculated to be in the range of ?0.57 to ?1.48 eV for OH and ?0.27 to ?1.19 eV for OCH₃. It was found that the adsorption of radicals may facilitate the electron emission from the BC₂N nanotube surface by decreasing the work function due to the charge transfer which occurs between the tube and radicals. Also, HOMO/LUMO gap of the tube is significantly decreased, which may result in the increase of the electrical conductivity of the tube.     

Network of nano-droplets by a tri-block polymer

Mixtures of oil in water nano-droplets with two molecular weights of a tri-block polymer was studied by quasi elastic light scattering and small angle X-ray scattering. The results showed that the size and interaction of droplets didn’t change with increase of the tri-block polymer length but the order parameters increased. The increase of length of the tri-block biopolymer changed the dynamics of the droplets. A network formation is resulted with increase of the amount of tri-block polymer in the microemulsions.     

On locally dually flat (α, β)-metrics with isotropic S-curvature

In this paper, we consider locally dually flat (??, ??)-metrics with isotropic S-curvature and find some necessary and sufficient conditions under which these metrics reduce to locally Minkowskian metrics.