Autour du théorème de Ferrand–Obata (Concerning the Theorem of Ferrand–Obata)

The aim of this article is to give a new dynamical proof of the Ferrand–Obata theorem when the manifold is compact. This will give us a generalisation of this theorem to transversally conformal foliations ofcodimension greater than three and constant basic functions.     

Boryl (Hetero)aryne Precursors as Versatile Arylation Reagents: Synthesis through CH Activation and Orthogonal Reactivity

(Pinacolato)boryl ortho‐silyl(hetero)aryl triflates are presented as a new class of building blocks for arylation. They demonstrate unique versatility by delivering boronate or (hetero)aryne reactivity chemoselectively in a broad range of transformations. This approach enables the unprecedented postfunctionalization of fluoride‐activated (hetero)aryne precursors, for example, as substrates in transition‐metal catalysis, and offers valuable new possibilities for aryl boronate postfunctionalization without the use of specialized protecting groups.     

Kinetics of iron–copper sulphides oxidation in relation to protohistoric copper smelting

This article deals with one specific step of the copper extractive metallurgy process: the roasting of iron–copper sulphides. It aims at shedding light on an archaeological issue: the reconstruction of the copper extractive metallurgy processes during protohistory (IV^e–II^e millennium BC). Experimental simulations are performed at laboratory scale by modelizing the conditions of protohistoric furnaces. Kinetic of roasting is studied by thermogravimetry combined with the physico-chemical analysis of synthetic products. The influence of two parameters is studied: (i) the temperature (773, 973 and 1173 K) and (ii) the granularity of the roasted ores (1 mm and 100 μm). In each case, the chemical mechanism governing the oxidation of iron copper sulphide is proposed. Apart from one extreme case (∅ = 1 mm; T = 773 K), it is showed that kinetic is controlled by the transport of molecular oxygen (O₂) from the gas to the grain surface. Moreover, we prove that, in some cases where the diffusivity of gaseous oxygen is low, roasting can be accelerated by the presence of an oxide, which constitute an in-situ source of oxygen. Theses experiments support the hypothesis that such a technique could have allowed a roasting process where iron and sulfur were removed by the solid oxygen instead of the gaseous oxygen. These results allow to validate a one-step copper smelting process starting from sulphidic ores, and to identify the experimental parameters of this process.     

The fate of mercury species injected into coelomic fluid of starfish Leptasterias polaris

Mature starfish Leptasterias polaris, collected in the St Lawrence Estuary (eastern Canada), were exposed to two mercury species (HgCI₂ and CH₃HgCI) via injections into the coelomic fluid. In vivo effects of some complexing agents (glutathione, mercaptoethanol and EDTA) on the distribution of ²⁰³Hg-labelled species in starfish organs and tissues and their possible role in mercury transport through membranes were studied over a 24 h period. The excretion of ammonia and mercury was also measured. When injected alone, inorganic mercury and methylmercury [CH₃Hg(II)] were distributed in all organs, with a preferential adsorption in gonads, pyloric caeca and stomach. Mercury excretion was very low under all conditions studied. Mercaptoethanol, a small thiol ligand, was very efficient in reducing both mercury species in the coelomic fluid and seems to have promoted translocation towards most organs of the starfish. Its action is attributed to the formation of small and neutral complexes, HgL₂ and CH₃HgL, which can diffuse through membranes preserving their integrity. Glutathione increased the translocation of CH₃Hg(II) towards surrounding organs, but had no apparent effect on inorganic mercury. EDTA promoted the transport of inorganic mercury only. These results highlight (1) the particular interest of starfish to workers studying in vivo chemical complexation of mercury species, and (2) the potential role of complexing molecules in the biotransport of mercury species through living membranes.     

Mass spectrometric investigation of the sequence selectivity for adduction of heterocyclic aromatic amines on single-strand oligonucleotides

Heterocyclic aromatic amines (HAAs) generated during the cooking of meats are known to be genotoxic substances able to form covalent bonds with DNA bases after metabolic activation. This work aimed at the investigation of the influence of the local environment of nucleobases along the nucleotidic sequence on its modification induced by two different HAAs, namely 2-amino-1-methyl-6-phenylimidazo[4,5-b]pyridine (PhIP) and 2-amino-3-methylimidazo[4,5-f]quinoline (IQ), in order to identify possible sequences more susceptible to modification. A systematic study of the neighbouring base effect on the adduction was emphasized. Thus, PhIP and IQ adducts have been synthesized with various T-rich model single-strand oligonucleotides displaying different flanking bases (A, G, C or T) at the 3' or the 5' side of the targeted guanine, which allowed a comparison of the flanking base effects on adduction. Modified oligonucleotides were then analyzed by high-performance liquid chromatography (HPLC) coupled to electrospray ionization mass spectrometry. The localization of the modifications induced by PhIP or IQ along the oligonucleotide sequence was achieved by tandem mass spectrometry, and modification yields of the various model sequences were compared. Results indicate a favouring sequence context effect on the G-C8-IQ adduct formation with the sequence 5'GGG3'. Although higher than IQ, modification yields observed with PhIP showed a less obvious effect of the neighbouring base on the G-C8-PhIP adduct formation, with a preferential sequence 5'GGA/G/T3'.     

A high-voltage lithium-ion battery prepared using a Sn-decorated reduced graphene oxide anode and a LiNi<Subscript>0.5</Subscript>Mn<Subscript>1.5</Subscript>O<Subscript>4</Subscript> cathode

This paper describes the preparation and characterization of a high-voltage lithium-ion battery based on Sn-decorated reduced graphene oxide and LiNi_0.5Mn_1.5O₄ as the anode and cathode active materials, respectively. The Sn-decorated reduced graphene oxide is prepared using a microwave-assisted hydrothermal synthesis method followed by reduction at high temperature of a mixture of (C₆H₅)₂SnCl₂ and graphene oxide. The so-obtained anode material is characterized by thermogravimetric analysis, X-ray diffraction, scanning electron microscopy, and electron diffraction spectroscopy. The LiNi_0.5Mn_1.5O₄ is a commercially available product. The two materials are used to prepare composite electrodes, and their electrochemical properties are investigated by galvanostatic charge/discharge cycles at various current densities in lithium cells. The electrodes are then used to assemble a high-voltage lithium-ion cell, and the cell is tested to evaluate its performance as a function of discharge rate and cycle number.     

New insights in the formation of deoxynucleoside adducts with the heterocyclic aromatic amines PhIP and IQ by means of ion trap MS<Superscript>n</Superscript> and accurate mass measurement of fragment ions

The formation of adducts by reaction of active metabolites of two heterocyclic aromatic amines (NHOH-PhIP and NHOH-IQ) at nucleophilic sites of deoxynucleosides has been studied by LC-MS(n) analyses of the obtained reaction mixtures. Sequential MS(3) experiments were carried out on an ion trap mass spectrometer to gain extensive structural information on each adduct detected in the first MS step. Attribution of ions was supported by accurate mass measurements performed on an Orbitrap mass analyzer. Particular attention was given to ions diagnostic of the linking between the heterocyclic aromatic amine (HAA) and the deoxynucleoside. By this way, the structures of five adducts have been characterized in this study, among which two are new compounds: dG-N7-IQ and dA-N(6)-IQ. No depurinating adduct was found in the reactions investigated therein. As expected, the C8 and N(2) atoms of dG were found as the most reactive sites of deoxynucleosides, resulting in the formation of two different adducts with IQ and one adduct with PhIP. An unusual non-depurinating dG-N7-IQ adduct has been characterized and a mechanism is proposed for its formation on the basis of the reactivity of arylamines. A dA-N(6)-IQ adduct has been identified for the first time in this work, showing that HAAs can generate DNA adducts with bases other than dG.     

Boryl (Hetero)aryne Precursors as Versatile Arylation Reagents: Synthesis through C?H Activation and Orthogonal Reactivity

(Pinacolato)boryl ortho‐silyl(hetero)aryl triflates are presented as a new class of building blocks for arylation. They demonstrate unique versatility by delivering boronate or (hetero)aryne reactivity chemoselectively in a broad range of transformations. This approach enables the unprecedented postfunctionalization of fluoride‐activated (hetero)aryne precursors, for example, as substrates in transition‐metal catalysis, and offers valuable new possibilities for aryl boronate postfunctionalization without the use of specialized protecting groups.     

Characterisation of B(a)P metabolites formed in an ex vivo pig skin model using three complementary analytical methods

An original method was developed to separate, identify and quantify the different benzo(a)pyrene (B(a)P) metabolites formed through oxidative and conjugative pathways. All B(a)P metabolites were separated by an improved high-performance liquid chromatography method, then detected and quantified relatively by online radioactivity detection. At the same time, metabolite structures were characterised by tandem mass spectrometry using two complementary ionisation modes: electrospray ionisation in the negative mode and atmospheric pressure chemical ionisation in the positive mode. This method was successfully applied to the analysis of B(a)P metabolites, produced by incubation of B(a)P with the ex vivo pig ear skin model. These include glucuronic acid and sulphate conjugates of B(a)P-OHs and B(a)P-diols, as well as direct phase I metabolites: B(a)P-tetrol, B(a)P-diones, B(a)P-catechols, B(a)P-diols and B(a)P-OHs.