Graphene sheet-encased silica/sulfur composite cathode for improved cyclability of lithium-sulfur batteries

Journal of Solid State Electrochemistry - The “shuttle effect” of polysulfides is a serious issue, resulting in a decrease in the life-cycle of lithium-sulfur (Li-S) batteries. To...     

Precise chelatometric titrations of zinc, cadmium, and lead with molecular spectroscopy.

Spectral data during a chelatometric titration were utilized for determining an equivalence point of the titration. Three-dimensional titration data were analyzed by fitting to a theoretical equation that was derived from equilibrium equations among a metal ion, an indicator and EDTA. The equation with optimized parameters successfully explained the three-dimensional titration data. This method was applied to EDTA titration systems of zinc, cadmium and lead with xylenol orange (XO) as an indicator. These systems were analyzed while taking the formation of 1:1 and 2:1 metal-indicator complexes into account. By this method, an accurate equivalence point was determined as well as stability constants and molar absorption spectra of metal-indicator complexes in each titration system. Moreover, the comparability among the concentrations of the metal standard solutions prepared from pure metals (Zn, Pb, and Cd) was also confirmed by the proposed evaluation method.     

Investigation of helium addition for laser-induced plasma spectroscopy of pure gas phase systems: Analyte interactions and signal enhancement

The role of helium addition on the analyte signal enhancement in laser-induced breakdown spectroscopy for analysis of pure gaseous systems was examined using carbon and hydrogen atomic emission lines. Increased analyte response, as measured by peak-to-base and signal-to-noise ratios, was observed with increasing helium addition, with maximum enhancement approaching a factor of 7. Additional measurements revealed a significant decrease in plasma electron density with increasing helium addition. To explore the mechanisms of analyte signal enhancement, the helium emission lines were also examined and found to be effectively quenched with nitrogen addition. In consideration of the data, it is concluded that the role of metastable helium is not as important as the overall changes in plasma properties, namely electron density and laser-plasma coupling. Helium addition is concluded to affect the electron density via Penning ionization, as well as to play a role in the initial plasma breakdown processes.     

Cyclo­decyl 4‐nitro­phenyl­acetate

Cyclodecyl 4‐nitrophenylacetate, C₁₈H₂₅NO₄, has its ten‐membered ring in the expected diamond‐lattice boat–chair–boat [2323] conformation, with the substituent 4‐nitro­phenyl­acet­oxy group in the BCB IIIe position. The ester unit has the expected Z conformation, with an O=C—O—C torsion angle of −0.3 (3)°, and the connection to the benzene ring is nearly perpendicular to the ester, with an O=C—C—C torsion angle of 85.5 (2)°. An inter­molecular contact exists between the ester C atom and a nitro O atom, having a C⋯O distance of 2.909 (2) Å.     

SYNTHESIS OF SOME SULFUR-CONTAINING SPIROINDOLE DERIVATIVES

Abstract

The synthesis of some new sulfur-containing spiroindole derivatives is reported. Fluorinated 3′-aryl-2′-phenylimino-spiro[3H-indole-3,6′[4,5′-pyrazolin][4,3-d]thiazolo]2(1H)-ones were prepared by the reaction of 5-(2-oxo-3-indolinylidene)-3-aryl-2-phenylimino-4-thiazolidinones with hydrazine hydrate. The compounds have been characterized on the basis of elemental and spectral studies.     

A production system with two job classes,changeover times and revisitation

This paper, motivated by the need to predict performance of production systems with random arrivals, setup times and revisitation, presents an imbedded Markov chain analysis of the underlyingM/G/1 queue with two customer classes, changeover times and instantaneous Bernoulli feedback. It is assumed that jobs are scheduled according to the exhaustive alternative priority queue discipline. Expressions for the mean waiting time and the nonsaturation condition are derived under two different priority assignments to the repeat customers. Sojourn times under these priority assignments are shown to possess a convex ordering. Results of the study are also applicable to data communication networks that operate under cyclic switching mechanisms. Research supported in part by Natural Sciences and Engineering Research Council of Canada.     

Impact of flexible machines on automated manufacturing systems

Although the problem of scheduling dynamic job shops is well studied, setup and changeover times are often assumed to be negligibly small and therefore ignored. In cases where the product mix changes occur frequently, setup and changeover times are of critical importance. This paper applies some known results from the study of multi-class single-server queues with setup and changeover times to develop an approximation for evaluating the performance of job shops. It is found that the product mix, setup and changeover times, and scheduling rules affect the performance significantly, in particular at high levels of machine utilisation. This approach could be used to determine the required level of flexibility of machines and to choose an appropriate scheduling policy such that production rates remain within acceptable limits for foreseeable changes in the product mix.     

Influence of the addition of aluminium nanoparticles on thermo-rheological properties of hydroxyl-terminated polybutadiene-based composite propellant and empirical modelling

The heat transfer performance and entropy analysis are done in a compact loop heat pipe (CLHP) with Al₂O₃/water and Ag/water nanofluid. A compact loop heat pipe having a flat square evaporator with dimensions of 34 mm (L)?×?34 mm (W)?×?19 mm (H) has been fabricated and tested for the heat load ranging from 30 to 500 W. The experimental tests are conducted by keeping the CLHP in the vertical orientation with distilled water, silver (Ag)/water and aluminium oxide (Al₂O₃)/water nanofluid having low volume concentrations of (0.09% and 0.12%). The effect of wall and vapour temperature, evaporator and condenser heat transfer coefficient, thermal resistance on the applied heat loads is experimentally investigated and compared. The experimental results showed that the evaporator thermal resistance is reduced by 34.70% and 20.21%, respectively, for 0.12 vol% of Ag, Al₂O₃ nanoparticles when compared with that of the distilled water. For the same volume concentrations of Ag, Al₂O₃ nanoparticles, an enhancement of 34.52%, 23.7%, 39.27% and 30.8%, respectively, observed for the convective heat transfer coefficients at the evaporator and condenser. The entropy is also reduced by 19.08% and 11.58% when Ag and Al₂O₃ nanofluids are used as the operating fluid. From the experimental tests, it is found that the addition of small amount of Ag nanoparticles in the working fluid enhanced the operating range by 15% when compared with that of Al₂O₃/water nanofluid without the occurrence of any dry-out conditions.

     

Conformational equilibria in formic acid and the adduct of formic acid and hexafluoroacetone, HCO2C(CF3)2OH

Low-temperature 1H and 13C NMR spectra of formic acid (1) showed separate signals for the E and Z conformations in solvents containing a hydrogen bond acceptor, dimethyl ether. The population of E-1 (6.2% in 3:1:1 CHClF2/CHCl2F/(CH3)2O) was larger than that for 13C-labeled methyl formate in the same solvent (0.2%), which indicated that the relative populations are not determined by steric effects. The free-energy difference between the E and Z conformations of 1 was 0.9 kcal/mol. In a 1:3 CD2Cl2/(CH3)2O solvent mixture, peaks for E and Z conformations were found at low temperatures by 1H and 13C NMR for both formic acid and an adduct with hexafluoroacetone, HCO2C(CF3)2OH (2). The population of E-1 in this solvent mixture was 4.3% by 13C NMR. The carbon spectrum showed two peaks in the carbonyl carbon region of nearly equal intensities at -151.6 degrees C, with E-2 (48%) absorbing downfield of the major Z-2 (52%). The large population of E-2 confirms that electron-withdrawing groups R' in RCO2R' enhance the populations of the E-isomers. The free-energy barriers for 2 of 6.24 (E-to-Z) and 6.26 kcal/mol (Z-to-E) were determined from rate constants obtained by line shape analysis at -143.2 degrees C.     

Effect of projectile nose shape on the ballistic resistance of ductile targets

Three-dimensional numerical simulations were carried out to study the ballistic resistance of ductile targets subjected to normal impact by the projectiles. 12 mm thick Weldox 460 E steel targets were impacted by 20 mm diameter conical nosed projectiles and 1 mm thick 1100-H12 aluminum targets were impacted by 19 mm diameter ogive nosed projectiles. The internal nose angle of conical projectile was varied (33.4°–180°) and found to have significant effect on the ballistic limit of 12 mm thick Weldox 460 E steel target. Similarly, the caliber radius head (CRH) of ogive nosed projectile was varied (0–2.5) and found to have significant effect on the ballistic limit of 1 mm thick 1100-H12 aluminum target. The ballistic limit of 12 mm thick Weldox 460 E steel target increased almost linearly with the decrease in the projectile nose angle. While the ballistic limit of 1 mm thick 1100-H12 aluminum target increased as the CRH increased from 0 to 0.5 and with further increase in CRH to 1.0, 1.5, 2.0 and 2.5 its values were found to drop quite significantly. ABAQUS/Explicit finite element code was used to carry out the numerical simulations.