Binding energy of impurity states in an inverse parabolic quantum well under magnetic field

 We have investigated the effects of the magnetic field which is directed perpendicular to the well on the binding energy of the hydrogenic impurities in an inverse parabolic quantum well (IPQW) with different widths as well as different Al concentrations at the well center. The Al concentration at the barriers was always x_max=0.3. The calculations were performed within the effective mass approximation, using a variational method. We observe that IPQW structure turns into parabolic quantum well with the inversion effect of the magnetic field and donor impurity binding energy in IPQW strongly depends on the magnetic field, Al concentration at the well center and well dimensions.     

Electrochemical Polymerization of Aniline at Low Supporting-Electrolyte Concentrations and Characterization of Obtained Films

Conductive polymers of aniline were synthesized in aqueous acidic media such as perchloric, sulfuric, hydrochloric, phosphoric, and trifluoroacetic acids and the effect of supporting electrolyte was investigated. The conductivity of each polyaniline (PAn) sample was determined by the four-probe technique. PAn (H₂SO₄) sample was shown to have the highest conductivity, specifically, 3.55 S cm^–1. The effect of concentrations of monomers and acids on the conductivity of PAn's was studied. It was observed that the conductivity decreased with increasing aniline concentration and increased with increasing sulfuric acid concentration. The conductivities of PAn (CF₃COOH) were also investigated in different supporting electrolytes and highly good increments of its conductivities were obtained. Magnetic properties of the PAn salts were analyzed by Gouy balance measurements and it was found that their conducting mechanisms are of bipolaron nature. From the FTIR analysis it was found that polymerization occurs via the –NH₂ group in a head-to-tail mechanism. The thermal analyses revealed that PAn (HCl) among the PAn salts studied shows the highest thermal stability. Surface analyses of polymers were clarified by scanning electron microscopy. From elemental analysis results, PAn salts were concluded to be in emeraldine structure.     

Computation of the eigenvalues of Sturm-Liouville problems with parameter dependent boundary conditions using the regularized sampling method

The purpose in this paper is to compute the eigenvalues of Sturm-Liouville problems with quite general separated boundary conditions nonlinear in the eigenvalue parameter using the regularized sampling method, an improvement on the method based on Shannon sampling theory, which does not involve any multiple integration and provides higher order estimates of the eigenvalues at a very low cost. A few examples shall be presented to illustrate the power of the method and a comparison made with the the exact eigenvalues obtained as squares of the zeros of the exact characteristic functions.

     

Luminescence kinetic and association equilibria of lanthanide ions in aqueous solutions. II. Determination of the formation constant of Tb acetato complex by means of luminescence lifetime measurement

The association constant K of mono-acetato complex of Tb³⁺ has been determined at normal p and T conditions by measurement of its luminescence lifetime in aqueous solution containing increasing concentrations of acetate. Two experimental arrangements used for the measurement are described.     

The reactions of tellurium tetrahalides with triphenylphosphine under ambient conditions

The reactions of tellurium tetrahalides and triphenylphosphine in tetrahydrofuran have been carried out under ambient conditions and afford [(Ph(3)PO)(2)H](2)[Te(2)X(10)] [X = Cl (1), Br (2)] and [(Ph(3)PO)(3)(OH(3)])(2)[TeI(6)] (4). The X-ray structures of 1 and 2 show that they are isostructural and contain discrete [Te(2)X(10)](2-) anions exhibiting octahedral coordination around both tellurium atoms with one shared edge and [Ph(3)POH...OPPh(3)](+) cations that show strong hydrogen bonds (the O...O distances are 2.399 and 2.404 A for 1 and 2, respectively). The compound 4 is built up with discrete octahedral hexaiodotellurate anions and [(Ph(3)PO)(3)(OH(3))](+) cations. The reaction of TeBr(4) and PPh(3) also results in the formation of formally zwitterionic Ph(3)PO(CH(2))(4)TeBr(4) (3). This reaction involves an unprecedented THF ring opening in which the oxygen atom becomes bonded to the phosphorus atom of triphenylphosphine and the carbon atom at the other end of the five-atomic chain becomes bonded to the tellurium atom of TeBr(4). The ring opening of the solvent THF is also taking place in the reaction involving tellurium tetraiodide, as indicated by the formation of C(4)H(8)TeI(2) (5). The reaction may initially lead to Ph(3)PI(2) that reacts with THF yielding Ph(3)PO and ICH(2)(CH(2))(2)CH(2)I. The latter species reacts with elemental tellurium producing 5. Depending on the conditions upon crystallization, two polymorphs of C(4)H(8)TeI(2) (5a and 5b) are observed. While the molecular structures of the two forms are virtually identical, their packing and intermolecular contacts are different. Two further minor products (6a and 6b) were isolated in the reaction of TeI(4) and PPh(3): Both are formally 1:1 adducts of 5 and TeI(4), but they differ considerably in their structures. 6a can be formulated as [C(4)H(8)TeI(+)](2)[Te(2)I(10)(2-)] and 6b as [C(4)H(8)TeI(+)](2)(TeI(3)(+))(2)(I(-))(4). The latter compound exhibits framework similar to that of the tetramers in gamma- and delta-TeI(4).     

Toxic and trace element analysis of surface sediments from the Gulf of Saros by INAA and XRF methods

Some surface sediment samples, collected from 53 sampling sites of the Saros Gulf, were analyzed quantitatively by radioisotope energy dispersive X-ray fluorescence (EDXRF) and instrumental neutron activation analysis (INAA). Results indicated some correlations between Rb and Sr (r = 0.64), Fe₂O₃ and MnO (r = 0.59), Th and La (r = 0.71), Th and Ce (r = 0.64), Th and Sm (r = 0.60), concentration pairs. U and Th results are found to be compatible with those given in the literature for marine sediments.     

Curves of marginal stability, and weak- and strong-coupling BPS spectra in N = 2 supersymmetric QCD

We explicitly determine the global structure of the SL(2, ) bundle over the Coulomb branch of the moduli space of asymptotically free N = 2 supersymmetric Yang-Mills theories with gauge group SU(2) when massless hypermultiplets are present. For each relevant number of flavours, we show that there is a curve of marginal stability of the Coulomb branch, diffeomorphic to a circle, across which the BPS spectrum is discontinuous. We determine rigorously and completely the BPS spectra inside and outside the curve. In all cases, the spectrum inside the curve consists of only those BPS states that are responsible for the singularities of the low energy effective action (in addition to the massless abelian gauge multiplet which is always present). The predicted decay patterns across the curve of marginal stability are perfectly consistent with all quantum numbers carried by the BPS states. As a byproduct, we also show that the electric and magnetic quantum numbers of the massless states at the singularities proposed by Seiberg and Witten are the only possible ones.     

Quantification of antimony depth profiles in Sb-doped tin dioxide thin films

Sb-doped SnO(2) thin films, deposited by atomic layer epitaxy (ALE) for gas sensor applications, have been characterized by secondary ion mass spectrometry (SIMS). Quantification of the depth profile data has been carried out by preparing a series of ion implanted standards. Average concentrations determined by SIMS have been compared with Sb/Sn ratios obtained by X-ray fluorescence (XRF) spectrometry and proton induced X-ray emission (PIXE) spectrometry and have been found to be in good agreement. However, a detection limit of 5x10(18) at cm(-3) could only be obtained because of mass interferences. SIMS data show that the ALE technique can be used to produce a controllable growth and doping of thin films.     

Determination of lead concentration and film thickness in electroluminescent calcium sulfide thin films by X-ray fluorescence

Summary For the analysis of electroluminescent thin films, X-ray fluorescence (XRF) provides a convenient method as both the concentration of the dopant and the film thickness can be determined rapidly and non-destructively. An XRF method for the determination of thickness and lead concentration in lead doped calcium sulfide thin films was developed. Calibration standards made of polyvinyl alcohol and gelatin as well as filter paper standards were used. In addition, the applicability of a fundamental parameter program UniQuant was investigated. For comparison, the concentrations of lead and calcium were determined after dissolution by atomic absorption spectrometry. Generally, the correlation between the different methods excluding the use of filter paper standards was satisfactory. When the dopant concentration was very low or very high, however, the fundamental parameter program yielded best results. Determination of thicknesses by XRF was made by comparing the sulfur K intensities of the sample and those of a zinc sulfide standard. A correction factor for molar masses and densities was applied. The thicknesses obtained were compared to those measured with a profilometer after etching and the deviations were found to be less than 10%.Dedicated to Professor Dr. Wilhelm Fresenius on the occasion of his 80th birthday     

Trennung von Spurenelementaktivitäten aus Neutronenbestrahltem Selen mit Hilfe der Gegenstrom-Ionenwanderung

For the determination of trace elements in neutron irradiated, selenium by gamma-ray spectrometry the separation of the matrix activity is often necessary. In model experiments the decontamination of cation and anion impurities from the matrix solution was investigated by the counter current ion migration. After a processing of 3 hrs the trace activities of Co, Cr, Ga, Na and Zn were decontaminated from Se with a factor of >10³. For the trace elements As and Te representing the anionic constituents, a decontamination factor of 3·10² was obtained.