Thermal decomposition of mineral zircon by alkali metal hydroxides

Thermal decomposition of zircon mineral was studied in the presence of sodium and potassium hydroxides and in the presence of a waste mixture of hydroxides containing NaOH and KOH in a weight ratio of 23. The process was controlled in such a way that the decomposition products might contain the minimum possible amount of alkali and could thus be applied for the syntheses of zircon pigments without any further exacting treatment.

---

Zusammenfassung Es wurde die thermische Zersetzung eines Zirkonminerals in Gegenwart von Natrium- und Kaliumhydroxid-sowie in Gegenwart einer Altlauge mit einem Gehalt an NaOH und KOH im Verhältnis zwei zu drei untersucht. Der Prozeß wird derart gesteuert, daß die Zersetzungsprodukte einen möglichst geringen Anteil an Lauge besitzen und so ohne weitere arbeitsaufwändige Behandlungen zur Synthese von Zirkonpigmenten verwendet werden können.

---

, 23. , , , - .

     

A study of the thermal preparation of c-Cd4/3Ca2/3P4O12

The possibility of preparing binary cadmium-calcium cyclotetraphosphate (tetrametaphosphate) by means of thermal dehydration of the appropriate binary dihydrogen phosphate has been studied. The possible formation of this condensation product from the cadmium ions that are often present in the starting phosphoric compound used in the technological preparation of binary calcium cyclotetraphosphates (serving as new special pigments) would represent an important, hygienic method of binding them to an insoluble, less harmful cadmium compound. The maximum proportion of calcium in the binary product, as found by the authors of this paper, amounts to half of the cadmium constituent (in molar terms). That is why Cd_2/3Ca_1/3(H₂PO₄)₂·2H₂O was used as the starting material. Its dehydration was observed mainly by thermal analytical methods under quasi-isothermal-isobaric conditions. Isothermal calcination of the initial binary dihydrogenphosphate was carried out in an electric oven at various temperatures. The reaction products obtained were analysed by chromatography, IR spectroscopy, X-ray diffraction analysis, electron microscopy and AAS. The compositions of the calcinates were determined through extraction with solutions of inorganic compounds and with organic reagents.     

Direct asymmetric aldol-Tishchenko reaction of aliphatic ketones catalyzed by syn-aminoalcohol-Yb(III) complexes

The asymmetric direct aldol condensation of aldehydes with ethyl- and propylketones is catalyzed by syn-alpha-aminoalcohol-Yb(OTf)3 complexes, yielding the anti-1,3-diol monoesters with high diastereocontrol and good enantioselectivity. Three adjacent stereogenic centers are created in a simultaneous aldol condensation and Evans-Tishchenko reduction in an acyclic system.     

Preparation and practical application of spinel pigment Co0.46Zn0.55(Ti0.064Cr0.91)2O4

Synthesis of the green spinel pigment Co_0.46Zn_0.55(Ti_0.064Cr_0.91)₂O₄ by a novel two-step method of preparation have been investigated. Inorganic pigments are almost always prepared by a solid state reaction. It is classical ceramic method which used oxides, hydroxides or carbonates as precursors. The reaction is performed at temperature higher than 1300°C and an agent of mineralization is usually present. The presented novel method of preparation decreases the calcining temperature necessary for reaching of bright and clear hue of the pigments prepared. Main attention was focused on the influence of two types of titanium raw materials on the temperature region of the spinel structure formation and on the colour properties of the pigments. The mixture of precursors with TiO₂ gives a one-phase system when calcining at 1100°C but the colour properties are more interesting at 1150°C. Thermal stability of this pigment is limited by temperature 1300°C. This temperature is connected with partial oxidation of Cr(III) to Cr(VI). Thermal analysis provided the first information about the temperature region of the pigment formation and determined the thermal stability of pigment.     

Micropatterning chemical oscillations: waves, autofocusing, and symmetry breaking

Arrays of chemical oscillators are micropatterned by Wet Stamping. The technique is used to demonstrate that chemical waves can be initiated and controlled in oscillatory systems and that such waves can give rise to phenomena not observed in excitable media. Interoscillator coupling and synchronization, kinetic autofocusing, and twist-symmetry breaking are a consequence of the dependence of the oscillation phase on the local concentrations of reagents and on systems' geometry. Conditions under which a generic oscillatory system would exhibit such behaviors are determined.     

A study of thermal preparation OF c-Mn2P4O12

With the application of thermogravimetry under quasi-isothermal-isobaric conditions, the reaction course of the calcination of Mn(H₂PO₄ · H₂O to give dimanganese cyclotetraphosphate has been studied. Isothermal calcination was also carried out in an electric furnace at various temperatures (200 min). The reaction products were analyzed by chromatography, IR and NMR spectrocopy, and X-ray diffraction analysis. The compositions of the calcinates were determined through extraction with various inorganic and organic solvents.

---

Zusammenfassung Der Verlauf der Dimangan-cyclotetraphosphat ergebenden Kalzinierung von Mn(H₂PO₄)₂ · H₂O wurde thermogravimetrisch unter quasi-isothermen-isobaren Bedingungen untersucht. Isotherme Kalzinierung wurde auch im elektrischen Ofen (200 min) bei verschiedenen Temperaturen ausgeführt. Die Reaktionsprodukte wurden chromatographisch, IR- und NMR-spektroskopisch sowie röntgendiffraktometrisch analysiert. Die Zusammensetzung der kalzinierten Produkte wurde via Extraktion mit verschiedenen anorganischen und organischen Lösungsmitteln bestimmt.

---

Mn(H₂PO₄ · H₂O. . . - , - - . .

     

Yellow pigments based on Fe2TiO5 and TiO2

The aim of our research was to prepare yellow pigments based on structure of pseudobrookite Fe₂TiO₅. Part of Fe was substituted with Li and Ti from Fe₂TiO₅ to Li_0.05Fe_0.07Ti_2.44O₅. Synthesis and pigmentary-application properties in the Li₂O–Fe₂O₃–TiO₂ system were studied for 800 and 900°C using classical ceramic method of preparation. The main attention was aimed to usage of four different sources of titanium compounds as raw materials. We studied the influence of different sources of titanium compounds on the structural and the colour properties of the prepared pigments. The thermal analysis was used for characterization of titanium compounds and determination of their thermal stability.     

Polymerization of nitrogen in sodium azide

The high-pressure behavior of nitrogen in NaN(3) was studied to 160 GPa at 120-3300 K using Raman spectroscopy, electrical conductivity, laser heating, and shear deformation methods. Nitrogen in sodium azide is in a molecularlike form; azide ions N(3-) are straight chains of three atoms linked with covalent bonds and weakly interact with each other. By application of high pressures we strongly increased interaction between ions. We found that at pressures above 19 GPa a new phase appeared, indicating a strong coupling between the azide ions. Another transformation occurs at about 50 GPa, accompanied by the appearance of new Raman peaks and a darkening of the sample. With increasing pressure, the sample becomes completely opaque above 120 GPa, and the azide molecular vibron disappears, evidencing completion of the transformation to a nonmolecular nitrogen state with amorphouslike structure which crystallizes after laser heating up to 3300 K. Laser heating and the application of shear stress accelerates the transformation and causes the transformations to occur at lower pressures. These changes can be interpreted in terms of a transformation of the azide ions to larger nitrogen clusters and then polymeric nitrogen net. The polymeric forms can be preserved on decompression in the diamond anvil cell but transform back to the starting azide and other new phases under ambient conditions.