Resolution of binary mixtures of cephalothin and clavulanic acid by using first derivative spectrophotometry

First-derivative spectrophotometric method with a “zero-crossing” technique of measurement has been used for the quantification of two-components mixtures of cephalothin and clavulanic acid. As the absorption bands of these drugs overlap, both direct and derivative spectrophotometric methods have been investigated and evaluated by a rigorous statistical analysis of the experimental data. The first-derivative spectrophotometric method was found to be more accurate, direct and reproducible. Beer's law was valid over the concentration range 2.0–28.0 mg/l for both compounds. The detection limits of cephalothin and clavulanic acid, at a 0.05 level of significance, were calculated to be 0.13 and 0.15 mg/l. The method was applied for determining these antibiotics in mixtures, some of them containing inject-able dosage forms of cephalothin, and so to determine both compounds in saline and glucosed physiological sera.     

An Asymmetric Edge-Sharing Bioctahedral Complex: (η2-DAniF)MoIII(μ-DAniF)2(μ-O,Cl)MoVCl2 (DAniF=N,N′-di-p-anisylformamidinate)

A novel asymmetric, edge-sharing bioctahedral complex with formamidinato ligands ( ²-DAniF)Mo(-DAniF)₂(-O,Cl)MoCl₂, 1, (DAniF=N,N-di-p-anisylformamidinate) has been isolated as a byproduct from the preparation of the dimolybdenum(II,III) compound Mo₂(DAniF)₃Cl₂. An X-ray crystallographic study shows that the structure consists of edge-sharing bioctahedra, with the shared edge defined by the vector joining the: -O and -Cl ligands. Compound 1 is best formulated as a mixed-valent Mo^IIIMo^V compound, the Mo(V) ion being that with the two terminal Cl^– ligands. The cyclic voltammogram of 1 shows a reversible reduction at –0.472 V and a reversible oxidation at 1.028 V vs. the Ag/AgCl reference electrode, while the absorption spectrum of 1 reveals an intense low energy absorption at 523 nm ( _max=12 500) which is attributed to an intervalence charge transfer transition. Crystallographic data for 1 are as follows: a=13.387(1) Å, b=15.500(2) Å, c=21.855(2) Å, =98.786(2)°, V=4481.8(8) ų, P2₁/c, R1 (wR2)=0.082 (0.177).     

Reaction products of W(CO)(6) with formamidines; electronic structure of a W(2)(mu-CO)(2) core with unsymmetric bridging carbonyls

Reactions of W(CO)(6) with formamidines contrast with those of Mo(CO)(6) and Cr(CO)(6) in that the former do not yield quadruply bonded dimetal species. From the reaction of W(CO)(6) with HDAniF (HDAniF = N,N'-di-p-anisylformamidine), several new ditungsten carbonyl compounds (W(2)(mu-CO)(2)(mu-DAniF)(2)(eta(2)-DAniF)(2) (1), W(2)(mu-CO)(2)(mu-DAniF)(2)(eta(2)-DAniF)(eta(2)-CH(2)DAniF) (2), and W(2)(mu-CO)(mu-CNC(6)H(4)OCH(3))(mu-DAniF)(2)(eta(2)-DAniF)(2) (3)) have been isolated and fully characterized. In 2, CH(2)DAniF represents a DAniF ligand in which a methylene group has been added to one of the nitrogen atoms. This ligand binds to the tungsten atom using a nitrogen and a carbon atom. Compound 1 has a tungsten-tungsten bond distance of 2.476(1) A and a planar W(2)(mu-CO)(2) core structure which has C(2)(h)() symmetry with short and long W-C bond distances (1.99(1) and 2.28(1) A, respectively). DFT calculations on a model of 1 indicate that (a) the C(2)(h)() instead of D(2)(h)() symmetry of the ditungsten core may be attributed to W --> CO pi back-bonding interactions and (b) the bond between the tungsten atoms may be formulated as a double bond. The new tetragonal paddlewheel compound W(2)(DAniF)(4) (4) and the edge-sharing bioctahedron W(2)(mu-O)(mu-NC(6)H(3)Cl(2))(mu-D(Cl)PhF)(2)(eta(2)-D(Cl)PhF)(2) (5) (D(Cl)PhF = N,N'-di-(3,5-dichlorophenyl)formamidinate) have also been prepared.     

The extraordinary ability of guanidinate derivatives to stabilize higher oxidation numbers in dimetal units by modification of redox potentials: structures of Mo(2)(5+) and Mo(2)(6+) compounds

Full characterization of the first homologous series of dimolybdenum paddlewheel compounds having electronic configurations of the types sigma(2)pi(4)delta(x), x = 2, 1, 0, and Mo-Mo bond orders of 4, 3.5, and 3, respectively, has been accomplished with the guanidinate-type ligand hpp (hpp = the anion of 1,3,4,6,7,8-hexahydro-2H-pyrimido[1,2-a]pyrimidine). Essentially quantitative oxidation of Mo(2)(hpp)(4), 1, by CH(2)Cl(2) gives Mo(2)(hpp)(4)Cl, 2. The halide in 2 can be replaced by reaction with TlBF(4) to produce Mo(2)(hpp)(4)(BF(4)), 3. Further oxidation of 2 by AgBF(4) produces Mo(2)(hpp)(4)ClBF(4), 4. The change from bond order 4 (in 1) to 3.5 in Mo(2)(hpp)(4)Cl is accompanied by an increase in the Mo-Mo bond length of 0.061 to 2.1280(4) A. A further increase of 0.044 A in the Mo-Mo distance to 2.172(1) A is observed as the bond order decreases to 3 in 4. At the same time, the Mo-N distances decrease smoothly as the oxidation state of the Mo atoms increases. Electrochemical studies have shown two chemically reversible processes at very negative potentials, E(1)(1/2)= -0.444 V and E(2)(1/2)= -1.271 V versus Ag/AgCl. These correspond to the processes Mo(2)(6+/5+) and Mo(2)(5+/4+), respectively. The latter potential is displaced by over 1.5 V relative to those of the Mo(2)(formamidinate)(4) compounds and the first one has never been observed in such complexes. Thus, in surprising contrast to previously observed behavior of the dimolybdenum unit, when it is surrounded by the very basic guanidinate ligand hpp, there is an extraordinary stabilization of the higher oxidation numbers of the molybdenum atoms.     

Spectrofluorimetric analysis of cefoxitin in pharmaceutical dosage

A fluorescence method involving sample pre-treatment is investigated concerning the determination of cefoxitin. A fluorescent product is formed when samples containing cefoxitin are subjected to alkaline hydrolysis with 1.0M sodium hydroxide and heated for 60 min at 90 degrees . The fluorescence is measured in ethanol/water medium (50% v/v) at approximately pH 2.0 provided by adding of 0.1M hydrochloric acid. The fluorescence excitation and emission maxima were 317 and 400 nm, respectively. The quantitative range is between 0.020 and 1.40 mug/ml. A detection limit of 2 x 10(-3) mug/ml was found. The proposed method has been applied to the determination of cefoxitin in commercial injections, saline and glucosed physiological serum.     

Synthesis and Structural Studies of Platinum Complexes Containing Monodentate, Bridging, and Chelating Formamidine Ligands

The reactions of K(2)PtCl(4) with N,N'-diphenylformamidine (HDPhF) and N,N'-di-p-tolylformamidine (HDTolF) produce the trans square-planar compounds PtCl(2)(HDPhF)(2), 1a, and PtCl(2)(HDTolF)(2), 1b. Compound 1a crystallizes as yellow parallelepipeds in the space group P2(1)/c with two independent molecules in the asymmetric unit and unit cell dimensions a = 23.427(7) ?, b = 16.677(6) ?, c = 12.980(4) ?, and beta = 96.10(2) degrees. These compounds are soluble in common organic solvents and have been used as starting materials for the preparation of diplatinum compounds. Treatment of 1a and 1b with NaOMe and the halide abstraction reagent TlPF(6) produces the compounds Pt(2)(&mgr;-DArF)(2)(eta(2)-DArF)(2), Ar = Ph (2a) and Tol (2b), respectively. Compound 2a crystallizes as yellow rods in the space group P&onemacr; with unit cell dimensions a = 12.296(3) ?, b = 12.310(4) ?, c = 15.374(4) ?, alpha = 90.75(2) degrees, beta = 91.02(2) degrees, and gamma = 110.20(2) degrees. Compound 2b crystallizes with a molecule of THF, as yellow rods in the space group P2(1)/c with a = 17.883(3) ?, b = 14.517(3) ?, c = 22.581(3) ?, and beta = 98.17(1) degrees. These compounds contain two cis bridging formamidinato ligands and two formamidinato ligands that are chelated to separate Pt centers. Upon heating, they further react to give the tetrabridged compounds Pt(2)(&mgr;-DArF)(4), Ar = Ph (3a), Tol (3b). Compound 3a crystallizes as orange cubes in the cubic space group I432 with a = 19.671(1) ?. On going from the bis-bridged, bis-chelate structure in 2a to the tetrabridged structure in 3a, the metal-metal separation decreases from 2.910(1) to 2.649(1) ?. Both 2band 3b have been oxidized to give the Pt(II)-Pt(III) compound Pt(2)(&mgr;-DTolF)(4)(PF(6)), 4. Compound 4 crystallizes as cubes in the tetragonal space group P4/ncc with a = 14.392(1) ? and c = 14.436(1) ?. The Pt-Pt distance in 4 is 2.5304(6) ?.     

Thermal decomposition of lignocellulosic materials: comparison of the results obtained in different experimental systems

An experimental system that allows the use of large particle sizes and the simulation of different operating conditions was built to study the thermal decomposition of lignocellulosic materials. The values of solid conversion and of temperature obtained at different points using spherical particles of pine wood 2 cm in diameter are shown. The conversion values are compared with those calculated from the equations obtained in a thermobalance for small particle sizes.     

A trinickel dipyridylamido complex with metal-metal bonding interaction: prelude to polynickel molecular wires and devices?

The molecule Ni(3)(dpa)(4)Cl(2) (1) can be oxidized by AgPF(6) to give crystalline Ni(3)(dpa)(4)(PF(6))(3) (2) (dpa is the anion of di(2-pyridyl)amine). This reversible oxidation occurs at a potential of 0.908 V vs Ag/AgCl electrochemically. The X-ray structure of 2 shows that the oxidation causes a major structural change (even though it is reversible), namely, a contraction of the Ni-Ni distances from ca. 2.43 A to 2.284[1] A. In addition, the electronic structure changes so that from four unpaired electrons in 1 there is only one in 2. From these remarkable results, it is inferred that while 1, and all higher homologues with 5, 7, 9,... nickel atoms are poor electronic conductors, the cations obtainable from them may be much better ones. This in turn means that by controlling the oxidation state electrochemically, these molecules may be able to function as nanoscale diodes.     

Compounds with symmetrical tricobalt chains wrapped by dipyridylamide ligands and cyanide or isothiocyanate ions as terminal ligands

Three new linear compounds of the type Co(3)(dpa)(4)X(2), where dpa is the anion of di(2-pyridyl)amine and X is NCS(-) (5), CN(-) (6), and N(CN)(2)(-) (7), have been prepared, and their structures and magnetic behavior have been studied. In all of them, including three different solvates of 5, the Co(3) chains are symmetrical with Co-Co distances of ca. 2.31-2.32 A. The appearance of four lines in the (1)H NMR spectra of the three compounds is also consistent with a symmetrical structure in solution. For all compounds, the magnetic behavior is quite similar with mu(eff) of ca. 1.9-2.0 micro(B) at temperatures between 1.8 and 200 K. As the temperature increases, the effective moments increase gradually, but since saturation is not reached, even at 400 K, the high-spin state cannot be assigned.     

A double-bonded niobium(III) compound with a formamidinate core: Nb2(μ-SMe)2(μ-DTolF)2 (η2-DTolF)2.2 toluene,DToIF= di-p-tolylformamidinate

The reaction of NaEt₃BH with Nb₂(-SMe₂)₃Cl₆ results in the transfer of a hydride ion to dimethylthioether with concomitant production of methane. Further reaction with potassium di-p-tolylformamidinate, KDTolF, yields Nb₂(-SMe)₂(-DTolF)₂²-DTolF:)₂.2 toluene, 1. In the latter, two thiomethoxide ions and two DTolF groups bridge the trivalent niobium atoms. Each of the other two DTolF groups chelate a metal atom to give the molecule an edge-sharing bioctahedral structure, The niobium-niobium distance of 2.655(2) A is consistent with the presence of a double bond between the metal atoms.