Development of solid-phase extraction and solid-phase microextraction methods for the determination of chlorophenols in cork macerate and wine samples

Tri-, tetra- and pentachlorophenol (TCP, TeCP and PCP) can be considered the precursors in the formation of corresponding chloroanisoles, known to be powerful odorants in corks and wine. Determining the presence of these chlorophenolic compounds in cork soaking solutions (ethanol/water mixtures, 12% (v/v) ethanol used for cork quality control testing), or in wine can be achieved by acetylation/gas chromatography electron-capture detection. In order to reach the required sensitivity, a previous preconcentration step is necessary. Solid-phase extraction (SPE) and headspace solid-phase microextraction (HS-SPME) have given good results for the preconcentration of TCP, TeCP and PCP in such matrices. The use of Oasis HLB cartridges gives acceptable recoveries for the three compounds when different volumes (50-250 mL) of cork macerate with concentrations ranging from 20 to 150 ng/L are processed. Preconcentration based on HS-SPME has also been optimised with a 100 microm polydimethylsiloxane fibre and in situ derivatization. The HS-SPME method allows chlorophenols in a cork soaking solution and in wine to be determined with a limit of detection of 1 ng/L for each compound (in cork macerate) and a repeatability of around 0.5%-5% (n=8) for a concentration level of 30 ng/L.     

Highly selective solid-phase extraction and large volume injection for the robust gas chromatography-mass spectrometric analysis of TCA and TBA in wines

A reliable solid-phase extraction (SPE) method for the simultaneous determination of 2,4,6-trichloroanisole (TCA) and 2,4,6-tribromoanisole (TBA) in wines has been developed. In the proposed procedure 50 mL of wine are extracted in a 1 mL cartridge filled with 50 mg of LiChrolut EN resins. Most wine volatiles are washed up with 12.5 mL of a water:methanol solution (70%, v/v) containing 1% of NaHCO3. Analytes are further eluted with 0.6 mL of dichloromethane. A 40 microL aliquot of this extract is directly injected into a PTV injector operated in the solvent split mode, and analysed by gas chromatography (GC)-ion trap mass spectrometry using the selected ion storage mode. The solid-phase extraction, including sample volume and rinsing and elution solvents, and the large volume GC injection have been carefully evaluated and optimized. The resulting method is precise (RSD (%) < 6% at 100 ng L(-1)), sensitive (LOD were 0.2 and 0.4 ng/L for TCA and TBA, respectively), robust (the absolute recoveries of both analytes are higher than 80% and consistent wine to wine) and friendly to the GC-MS system (the extract is clean, simple and free from non-volatiles).     

Odour-causing organic compounds in wastewater treatment plants: evaluation of headspace solid-phase microextraction as a concentration technique

Odorous emissions from wastewater collection systems and treatment facilities affecting quality of life have given local populations reasons to complain for decades. In order to characterise the composition of such malodorous emissions, a method based on headspace solid-phase microextraction (HS-SPME) and gas chromatography coupled to mass spectrometry (GC-MS) has been developed to determine a list of compounds belonging to different chemical families, which have been previously described as potentially responsible for odour complaints, in wastewater matrices. Some parameters affecting the chromatographic behaviour of the target compounds were studied (e.g. splitless time). Experimental conditions affecting the extraction process (temperature, time and salt content) were evaluated by applying a factorial design at two levels. Using a DVB/CAR/PDMS fibre and the optimised HS-SPME conditions, calibration curves were constructed with detection limits in the range of 0.003-0.6 μg L(-1). Recovery values higher than 70% and relative standard deviation values between 5 and 16% (n=5) were obtained for all compounds and found to be satisfactory. In wastewater samples, a decrease in the concentration of the analysed compounds through the different treatments was observed. Most of the target analytes were found in influent samples while only octanal and carvone were detected in samples from the plant effluent.     

A Power Interruption Technique for Investigation of Temperature Difference in Stabilized Low Direct-Current Arc Burning in Pure Argon on Atmospheric Pressure

Plasma of argon stabilized arc column, in a current range 3-11 A, is investigated using emission spectrometric diagnostic techniques. Temperatures are evaluated using several methods： argon line to adjacent recombinational continuum intensity ratio, absolute emissivity of argon line, measurement of electron number density, and power interruption. Electron number density is evaluated from absolute emissivity of recombinational continuum. The difference between electron Te and heavy particle Th temperature ranged from 4500 K for 3 A to 2300 K for 11A arc current. By comparing the present with the previously obtained results, using the same arc device but with the introduction of water aerosol, it is concluded that water aerosol reduces the difference Te - Th and brings plasma closer to the partial thermodynamic equilibrium state.     

Effects of O ions beam irradiation on crystal structure of rare earth sesquioxides

We report the results of ion irradiation influence on rare earth sesquioxides structure, which are materials of practical importance as a radiation resistant ceramics in nuclear applications. Y₂O₃, Gd₂O₃ and Er₂O₃ sesquioxides in the pellet form were irradiated by oxygen ions (O²⁺) beam with the energy of 30 keV and implantation fluence of 5 × 10²⁰ m⁻². Samples are characterized by Grazing Incidence X-ray Diffraction (GIXRD), Raman spectroscopy and atomic force microscopy (AFM). By GIXRD it was found partial transformation from cubic (C) to monoclinic (B) phase only in Gd₂O₃, induced by O²⁺ irradiation. This was confirmed by Raman spectroscopy. Although full phase transition from C to B phase in Y₂O₃ was not observed, the splitting and broadening of the main intensity Raman band for C phase could be explained by the stress and the disorder induced by the quenching. Analysis done by AFM showed changes in surface topology, i.e. values of average roughness (Ra) and root mean squared roughness (RMS) were significantly changed after irradiation for all samples. RMSs in Y₂O₃ before and after irradiation were 35 nm and 26 nm, respectively.     

Assays on the simultaneous determination and elimination of chloroanisoles and chlorophenols from contaminated cork samples

A method for the simultaneous determination of the chloroanisoles and chlorophenols in cork samples with gas chromatography has been evaluated in view to its application. All the stages of the suggested procedure have been submitted to an in-depth examination using spiked ground corks. The recoveries of the method, which involves a simultaneous extraction with n-pentane followed by a second extraction using an aqueous basic solution where the phenolic derivates are transferred and, subsequently, derivatised, have been satisfactory for the all analytes at the studied spiking concentration levels. Good precision data and limits of detection between 1 ng/g and 2 ng/g were obtained for almost all compounds. As real samples, naturally contaminated cork slabs taken from different sources have been analysed, showing the presence of 2,4,6-trichloroanisole (TCA) and, in lesser extent, its direct precursor, 2,4,6-trichlorophenol (TCP). Removal studies have been performed by washing these tainted cork slabs with different solutions: Milli-Q water, sodium hydroxide and commercial products. Sodium hydroxide solutions have led to better analyte elimination, and the complete removal of TCP from the cork has been accomplished together with 72% of TCA reduction has been achieved.     

Development of a method for the monitoring of odor‐causing compounds in atmospheres surrounding wastewater treatment plants

This study describes the development of an analytical method based on active collection in a multisorbent Tenax TA/Carbograph 1TD tube, followed by thermal desorption and GC‐MS for the determination of 16 volatile organic compounds in air samples. The analyzed compounds include ozone precursors and odor‐causing compounds belonging to different chemical families (sulfur‐ and nitrogen‐containing compounds, aldehydes, and terpenes). Two types of sorbents were tested and desorption conditions (temperature, time, and sampling, and desorption flow) were evaluated. External calibration was carried out using the multisorbent bed. Method detection limits in the range 0.2–2.0 μg m^?3 for 1 L samples were obtained. The method was applied for determining the target compounds in air samples from two different wastewater treatment plants. Most compounds were detected and toluene, limonene, and nonanal were found in particularly high concentrations with maximum values of 438, 233, and 382 μg m^?3, respectively.     

Development of a selective optical sensor for Cr(VI) monitoring in polluted waters

An optical sensor is described for the sensitive and selective determination of the Cr(VI) ion in aqueous solutions. The optode membrane is prepared by incorporating Aliquat 336 as an ionophore and a chromoionophore (4',5'-dibromofluorescein octadecyl ester) in a poly(vinyl chloride) (PVC) membrane containing ortho-nitrophenyloctyl ether (o-NPOE) as a plasticizer. The response to Cr(VI) is indicated by co-extraction of the target species and of hydrogen ions into the bulk of the membrane yielding large absorbance changes which can easily be measured in the visible spectral range. The optode membrane shows a reversible response in the concentration range of 1.1x10(-5)-1.0x10(-3) M and has been shown to be more selective towards the HCrO4(-) ion than other anions with a selectivity pattern HCrO4(-) > SCN- approximately = ClO4(-) > NO3(-) approximately = I- approximately = NO2(-) > H2PO4(-) approximately = Cl- approximately = SO4(2-). The sensing method developed has successfully been applied to the determination of Cr(VI) in spiked river water as well as in electroplating rinse waters.     

A multichannel electron energy loss spectrometer for low-temperature condensed films

We describe a wide-gap multichannel cylindrical deflection electron energy analyzer suitable for measuring the weak signals characteristic of electronically inelastic electron energy loss spectra. The analyzer has nearly ideal fringing field termination, and its resolution and energy dispersion were characterized as a function of energy by solving numerically the equation of motion of electrons in an ideal cylindrical electric field. The numerical results for the radial location of the electrons at the detector as a function of the entrance location, angle, and energy are closely approximated by a second order polynomial, and match closely with those observed. The detection efficiency of the analyzer is 100-150 times better than that of an equivalent single-channel instrument, but limited energy transmission of the zoom lens system used in our case reduced it by a factor of about 2. The performance of the new instrument was demonstrated by measuring the (3)E(1u) electronic spectrum of benzene in only 2 min and the spectrum of endo-benzotricyclo[4.2.1.0(2.5)]nonane.