CRYSTALLIZATION AND MELTING OF NYLON 610

Differential scanning calorimetry was used to study the crystallization andmelting of nylon 610. For nylon 610 crystallized from the melt state (260℃), the overall rateof bulk crystallization can be described by a simple Avrami equation with Avrami exponentn ≈ 2, independent of crystallization temperature. With the experimentally obtainedT_m~0 (235℃ ～ 255℃) of nylon 610, the fold surface free energy σ_e was determined to be35 ～38 erg/cm~2. The effects of annealing temperature and time on the melting of quenchednylon 610 were also investigated. For nylon 610 quenched at room temperature there isonly one DSC endotherm peak DSC scans on annealed samples exhibited an endothermpeak at approximately 10℃ above the annealing temperature. The size and position of theendothermic peak is strongly related to annealing temperature and time. An additionalthird melting was observed when quenched nylon 610 was annealed at high temperaturefor a sufficiently long residence time. The existence of the third melting peak suggests thatmore than one kind of distribution of lamella thickness may occur when quenched nylon610 is annealed. The implications of these results in terms of crystal thickening mechanismwere discussed.     

Existence of Single and Multiple PositivePeriodic Solutions for a Kindof Delay Logistic Equations

W匕eonsider the existenee of single and multiple positive periodie solutions for the generalperiodie Logistie equation ,‘(t)=夕(t)!a(t)一f(t,夕(t一几(t)),…,夕(t一几,(t)))],t‘R,(E)wheref:Rx皿+’‘什矿15 eontinuous,a(t)〔C(皿,R+),瑞(亡)〔C(R,R),anda(t)=a(t+T),几二(t)=爪(t+T),饥=1,…,,z,f(t,。1,。2,…,。,,)=f(亡+T,。,,。2,…,。。),T>O· It 15 well known that many matliematieal eeologieal Logistie equations are related to tl、eequation(E),e.g.,(1)the single speeies periodie populatio,i ,,…     

温敏性嵌段共聚物纳米胶束的制备及其稳定性

通过N-异丙基丙烯酰胺(NIPAAm)和N,N-二甲基丙烯酰胺(DMAAm)在链转移剂巯基乙醇存在下的自由基共聚,制备了具有端羟基的共聚物P(NIPAAm-co-DMAAm).利用其端羟基在异辛酸亚锡催化下引发己内酯开环聚合,得到了两亲性嵌段共聚物P(NIPAAm-co-DMAAm)-b-PCL,并在聚己内酯(PCL)链末端引入可光催化反应的不饱和双键.通过1H-NMR、GPC和相转变温度(LCST)等方法对聚合物进行了结构表征,测定了嵌段共聚物形成胶束的临界胶束浓度和胶束粒径,比较了核交联前后胶束的粒径和稳定性.结果表明:通过调节共聚物的组成,可获得LCST在40℃附近的胶束,胶束经核交联后,粒径有所减小,但稳定性明显提高,可用于对药物的温敏控制释放.     

新型层状晶态聚(苯乙烯-苯乙烯基膦酸)-磷酸锌铵有机聚合物-无机杂化材料的合成与表征

将苯乙烯-苯乙烯基膦酸共聚物、 二水合醋酸锌和磷酸二氢铵在温和的条件下反应, 通过调节无机磷酸盐和有机膦酸的比例, 合成了一系列有机聚合物-无机杂化材料聚(苯乙烯-苯乙烯基膦酸)-磷酸锌铵. 通过FTIR, TG, XRD, SEM和TEM等手段对其进行表征并测试了其催化性能. 结果表明, 聚(苯乙烯-苯乙烯基膦酸)-磷酸锌铵是一种新型层状晶态的有机聚合物-无机杂化材料, 具有较高的热稳定性和特殊的多孔结构. 将其作为催化剂载体, 以芳香二胺作为连接基团, 轴向固载手性Salen Mn(Ⅲ)制备了多相催化剂, 并用于非功能化烯烃的不对称环氧化反应. 催化实验结果表明, 该催化剂在以m-CPBA/NMO为氧化体系催化α-甲基苯乙烯和茚的反应中显示出优良的催化性能, 如催化茚的e.e.值可达99%, 并且可以回收利用, 循环使用8次仍具有较好的催化活性, 具有潜在的工业应用价值.     

表面处理剂对聚酯薄膜与紫外光固化光油之间附着力的影响

聚酯薄膜与紫外光(UV)固化光油之间的附着力极差,用胶带拉脱时完全脱落.为此,分别采用AF-201磺化聚酯、YF-40聚丙烯酸树脂、PR-32聚氨酯、EX-40F丙烯酸改性聚氨酯和PX-1010丙烯酸改性聚酯等表面处理剂对聚酯薄膜表面进行涂覆处理,以改善聚酯薄膜的表面性能,提高其与UV光油之间的附着力.附着力测定结果表明,PX-1010丙烯酸改性聚酯可明显提高聚酯薄膜与UV光油的附着力.     

LaSalle''''s Theorem for Stochastic Differential Equations

In this paper, we establish a the LaSalle's theorem for stochastic differential equation based on Li's work, and give a more general Lyapunov function which it is more easy to apply. Our work has partly generalized Mao's work.     

两种双核稀土配合物的光致变色和光磁效应

利用光诱导电子转移机理和配位驱动组装策略探索室温光磁效应材料的合成. 通过组装稀土硝酸盐与1,10-菲罗啉(phen)获得2种同构双核稀土配合物[Ln₂(NO₃)₆(phen)₂](1: Ln=Gd; 2: Ln=Dy). 由于具有电子给体-受体结构特征, 目标产物在光照后发生电子转移, 电子由硝酸根的氧原子转移到phen的氮原子, 进而产生光生自由基并发生肉眼可见的颜色变化. 除光致变色外, 配合物1和2在室温下具有光磁效应. 本研究为构筑室温光致变色和光磁效应杂化材料提供了一种通用方法: 配位组装顺磁金属盐与菲罗啉衍生物.     

测定人参花中多种有机氯农药残留量的方法研究

建立一种测定人参花中16种有机氯类农药残留量的方法,并对其进行方法学考察。方法样品经乙腈提取后,加入无水硫酸镁和氯化钠除水、分层,再通过N-丙基乙二胺(PSA)、十八烷基硅烷键合硅胶(C18)和无水硫酸镁净化,浓硫酸除水、脱色,采用气相色谱法测定,外标法定量。16种有机氯农药在质量浓度0.001～0.100μg·mL^-1范围内均呈现良好的线性关系,相关系数r≥0.99914,且分离度良好;检出限(LOD)为0.00026～0.00073μg·mL^-1,定量限(LOQ)为0.00080～0.0022μg·mL^-1;人参花样品在0.0050、0.010、0.050、0.100 mg·kg^-1添加水平下的回收率为77.20%～116.87%;相对标准偏差(RSD)在1.31%～11.88%,符合农药残留相关分析标准<15%的要求。本实验所建立的方法简便快速、灵敏度高,适用于人参花中16种有机氯农药残留量的同时测定。     

随机微分方程LaSalle定理

In this paper, we establish a the LaSalle's theorem for stochastic differential equation based on Li's work, and give a more general Lyapunov function which it is more easy to apply. Our work has partly generalized Mao's work.     

N-异丙基丙烯酰胺类共聚物温敏性研究

制备了N-异丙基丙烯酰胺(NIPAAm)与N,N-二甲基丙烯酰胺(DMAAm)和/或甲基丙烯酸羟乙酯(HEMA)的二元及三元共聚物,研究了组成和链转移剂用量对共聚物温敏性的影响,并在上述三元共聚物上接枝聚己内酯(PCL)得到温敏性两亲聚合物.结果表明,随着DMAAm增加、HEMA减少或共聚物分子量降低,共聚物的最低临界溶解温度升高,且PCL链段的接枝度和长度对聚合物的温敏性影响明显.