Geometrically nonlinear dynamic analysis of the stiffened perovskite solar cell subjected to biaxial velocity impacts

Nonlinear Dynamics - The perovskite solar cell (PSC) is one of the most promising photovoltaic candidates along with the highly increasing demand for green electricity. One of the main concerns...     

盐酸伊达比星杂质A的合成工艺优化及其高效液相分析

通过对盐酸伊达比星脱羟基杂质A的合成研究，为盐酸伊达比星的质控标准提供参考。以盐酸伊达比星为起始原料，经过4步反应得到脱羟基杂质A。本文提供了盐酸伊达比星杂质A的制备方法以及高效液相色谱分析方法，为杂质含量控制提供了依据。该工艺可以稳定、快速制备高纯度脱羟基杂质A，制备总收率为57.20%，纯度为57.20%，其结构经¹H NMR， ¹³C NMR和MS(ESI)表征。     

Real-time phase measurement and correction of dynamic multimode beam using a single spatial light modulator

In this Letter,a novel system for adaptively correcting the phase of a dynamic multimode beam is proposed.While using merely one spatial light modulator,the phase measurement of the first-order diffraction pattern and the correction of the zeroth diffraction order are simultaneously realized.The real-time experimental result is obtained at a control rate of 10 Hz.The power-in-the-bucket value is improved from 38.5%to 61.8%,even with fundamental mode content that is consistently below 30%.To the best of our knowledge,this is the first implementation of real-time adaptive correction of the entire multimode beam.     

A new rule of vibration sampling for predicting acoustical radiation from rectangular plates

Structural surface velocity distribution is often used to predict structural borne sound radiation. However the sampling interval of velocity should be chosen carefully to increase the prediction accuracy and to reduce the system cost. In this paper, several factors affecting the sampling interval are theoretically analyzed and discussed for a vibrating baffled rectangular plate. A new rule for the determination of the sampling interval is formulated. Using this rule, the results from both numerical simulations and experiments may be explained well.     

基于平均和峰值灰度加权的自动调光系统

介绍了在CCD高速电视测量仪系统中，利用电子快门和可变光阑有机结合，在运动控制卡控制下实现自动调光，扩大了调光的动态范围.采用了平均灰度和峰值灰度加权的办法来获取反馈信号，有效的解决不同背景下自调光系统的适应性.提出了基于二次函数的调光反馈量计算方法，提高了调光过程中的收敛速度，同时也保证了系统有较小的超调量.     

大口径光束波前采样器(孔栅)的研制

应用平面波角谱理论，分析了采样器对光波场采样和分光的基本原理以及对空间采样频率的选择规则，描述了实际研制的大口径采样器的结构设计，并通过数值方法和高能激光大气传输实验研究了高能激光经采样器前／后的远场光斑分布关系。结果表明：利用光束波前采样器能高保真地实现对高能激光束的分光。     

A parallel inexact newton method for stochastic programs with recourse

A parallel inexact Newton method with a line search is proposed for two-stage quadratic stochastic programs with recourse. A lattice rule is used for the numerical evaluation of multi-dimensional integrals, and a parallel iterative method is used to solve the quadratic programming subproblems. Although the objective only has a locally Lipschitz gradient, global convergence and local superlinear convergence of the method are established. Furthermore, the method provides an error estimate which does not require much extra computation. The performance of the method is illustrated on a CM5 parallel computer.This work was supported by the Australian Research Council and the numerical experiments were done on the Sydney Regional Centre for Parallel Computing CM5.     

高压陡脉冲信号测量系统的补偿

本文针对高压陡脉冲测量过程中由于对地电容引起的波形畸变,介绍了一种电感补偿方法,这种补偿回路简便、可靠,可使测量系统的方波响应得到明显的改善。     

基于队列式缓存结构的视频图像存储算法

针对视频图像数据实时存储过程中普遍存在的丢帧问题，通过深入分析典型的存储算法，找出实时存储过程中视频图像数据丢失的原因：计算机在连续存储相同大小的文件时，存储速度在一定的范围内波动.本文采用队列式缓存结构有效地消除了存储速度波动所带来的影响，保证了在数据流速小于磁盘平均存储速度的前提下,高速视频图像数据的实时存储，解决了丢帧问题.实践验证了该算法的可行性与可靠性.     

Synthesis of graft copolymers with “V‐shaped” and “Y‐shaped” side chains via controlled radical and anionic polymerizations

A combination of nitroxide‐mediated radical polymerization and living anionic polymerization was used to synthesize a series of well‐defined graft (co)polymers with “V‐shaped” and “Y‐shaped” branches. The polymer main chain is a copolymer of styrene and p‐chloromethylstyrene (PS‐co‐PCMS) prepared via nitroxide‐mediated radical polymerization. The V‐shaped branches were prepared through coupling reaction of polystyrene macromonomer, carrying 1,1‐diphenylethylene terminus, with polystyryllithium or polyisoprenyllithium. The Y‐shaped branches were prepared throughfurther polymerization initiated by the V‐shaped anions. The obtained branches, carrying a living anion at the middle (V‐shaped) or at the end of the third segment (Y‐shaped), were coupled in situ with pendent benzyl chloride of PS‐co‐PCMS to form the target graft (co)polymers. The purified graft (co)polymers were analyzed by size exclusion chromatography equipped with a multiangle light scattering detector and a viscometer. The result shows that the viscosities and radii of gyration of the branched polymers are remarkably smaller than those of linear polystyrene. In addition, V‐shaped product adopts a more compact conformation in dilute solution than the Y‐shaped analogy. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4013–4025, 2007