Second harmonic generation in In2O3–SiON films doped by Al and Sn

Photoinduced optical and second-order non-linear optical effects in the interfaces separating In₂O₃–SiON (O/N ratio equals 1) films doped with A1, Sn and glass substrates were investigated using the photoinduced optical second harmonic generation. The photoinduced effective second-order optical susceptibility d_eff (at λ=1.76 μm) shows a good correlation with the linear optical susceptibility, particularly with the shift of the absorption edge. The maximal response of the photoinduced optical response signal was observed for the pump–probe delaying time of 34 ps. The performed experimental measurements indicate that the observed effects are mainly caused by the interface potential gradients on the border glass–In₂O₃–SiON film and by additional polarization due to insertion of the Al and Sn atoms. The observed phenomenon may be proposed as a sensitive tool for investigation of thin semiconducting interfacial layers and simultaneously such films may be used as materials for non-linear optical devices.     

Investigation and modelling of damping in a plate with a bonded porous layer

Behavior of a poro-elastic material bonded onto a vibrating plate is investigated in the low-frequency range. From the analysis of dissipation mechanisms, a model accounting for damping added by the porous layer on the plate is derived. This analysis is based on a 3-D finite element formulation including poro-elastic elements based on Biot displacement theory. First, dissipated powers related to thermal, viscous and viscoelastic dissipation are explicited. Then a generic configuration (simply-supported aluminium plate with a bonded porous layer and mechanical excitation) is studied. Thermal dissipation is found negligible. Viscous dissipation can be optimized as a function of airflow resistivity. It can be the major phenomenon within soft materials, but for most foams viscoelastic dissipation is dominant. Consequently an equivalent plate model is proposed. It includes shear in the porous layer and only viscoelasticity of the skeleton. Excellent agreement is found with the full numerical model.     

IR-induced nonlinear optics in Ge-doped Bi12TiO20 large-sized nanocrystallites

Photoinduced non-linear optical effects in large-sized (up to 25 nm) nanocrystallites (NC) of Ge-doped Bi₁₂TiO₂₀ (BTO:Ge) incorporated within olygoether photopolymer matrix have been studied. Photoinduced second harmonic generation (PISHG) was measured. Nd:YAG pulsed laser (λ=1.06 μm) was used as a source of photoinducing light. As a fundamental light source for the SHG and two-photon absorption, Er:LiYF₄ laser (λ=2.065 μm) was used. We have found that with increasing IR pump power density, the output doubled frequency SHG signal (λ=1.03 μm) increases and achieves its maximum value at the pump power density about 0.45 GW/cm² and NC size about 12 nm.The values of second-order optical susceptibilities were almost 20% larger than for the pure BTO NC single crystals. With decreasing temperature below 60 K, the SHG signal increases achieving maximal value at LHeT.     

Third-order nonlinear optical figure of merits for conjugated TTF-quinone molecules

We have revealed a substantial enhancement of third-order optical figure of merits by the synthesis of a compact molecule possessing the tetrathiafulvalene (TTF) group with two backside C=O groups. Addition of the saturated methylene chain substantially suppresses the third-order optical figure of merits and even local optical hyperpolarizabilities at lambda = 532 nm. Another TTF-derivative molecule possessing ethylenic and acetylenic chains demonstrates large hyperpolarizabilities; however, generally, the figure of merit factor decreases due to the increasing optical losses as a consequence of enhanced linear absorption. At the same time, both of the chromophores have a large nonlinear optical response. General approaches for search and design of the third-order optical materials with improved properties are given.     

Deux methodes photothermiques a l'etude d'une preparation de contact d'un melange binaire de cristaux liquides

The photopyroelectric (PPE) method is proposed as a sensitive technique to study a binary mixture of liquid crystals in a contact preparation. The photothermal signal is generated while scanning the contact preparation. The crystal-smectic A, smectic A-nematic, and nematic-isotropic interphase boundaries are detected. The displacement of these boundaries due to the variation of the temperature is monitored. The study of these displacements allows us to draw the complete temperature-concentration phase diagram of a binary mixtures. This revised version was published online in August 2006 with corrections to the Cover Date.     

Pyrolysis of poly-α-acetoxystyrene,a polymer derived from polystyrene and poly(vinyl acetate)

The pyrolysis of poly-α-acetoxystyrene was investigated by using two methods thermogravimetry, and a reactor working under dynamic conditions coupled with a chromatograph.Thermogravimetry was used firstly with a constant heating rate and secondly under isothermal conditions. Two different degradation steps for the polymer were found, the first between 140 and 200°C and the second above 220°C. The kinetics of the overall pyrolysis were studied for the first thermal degradation step. The degradation order is zero when the weight loss is less than 10%, and unity when the weight loss is between 10 and 32%. The activation energy is about 40 kcal/mole for either order. The results obtained by using dynamic and isothermal thermogravimetry are in good agreement.Volatile products were identified and analysed by using a reactor working under dynamic conditions coupled with a chromatograph. The decomposition is similar to that of poly(vinyl acetate) and different to that of known substituted polystyrenes. Acetic acid was the main component of the volatile products (90–95%), the others being the monomer and acetophenone.     

Study of the electrocaloric effect in ferroelectric liquid crystals

ABSTRACT

Electrocaloric effect (ECE) in two ferroelectric liquid crystalline (FLC) materials has been evaluated by mean of two indirect characterization methods: the photopyroelectric (PPE) technique and the polarization current reversal one. The obtained results show a good correspondence of the adiabatic temperature change associated with the ECE evaluated from both methods. This validates the possibility to use the PPE technique to investigate the ECE in FLCs. This study also demonstrates that FLCs can be used as electrocaloric material. More particularly, it shows that as for their solid homologous, liquid crystals displays more pronounced ECE in the vicinity of a first order transition than that measured near to second-order one.     

Measurement of the dynamic fracture toughness with notched PMMA specimen under impact loading

In the present study three-point-bend impact experiments were conducted using an instrumented Charpy pendulum with a laser displacement measurement to better understand the correlation between impact velocity and the dynamic effects observed on the load-time curves. The experiments were performed at impact velocities ranging from 1 to 4 m/s.The aim of this work is to measure the dynamic fracture toughness at high impact velocities where the classical method is limited by the inertial effects. The direct measurements of the specimen deflection are successfully used for the toughness evaluation. The results obtained with this method, which are compared to other studies, indicate that this approach seems promising for brittle materials such as PMMA.