Indirect kinetic spectrophotometric determination of hydroxylamine based on its reaction with iodate.

A simple, precise and accurate method is proposed for rapid determination of trace amounts of hydroxylamine based on the reaction of hydroxylamine with iodate in acidic media. The reaction of neutral red by the produced nitrite ion was used to monitor the reaction spectrophotometrically at 525 nm by a fixed time method. Hydroxylamine in the range of 0.0400-1.200 microg mL(-1) could be determined. The relative standard deviation for 10 determinations of 0.500 microg mL(-1) hydroxylamine was 1.81% and the limit of detection was 0.010 microg mL(-1). The proposed method was applied to the determination of hydroxylamine in water samples with satisfactory results.     

Simultaneous kinetic-spectrophotometric determination of hydrazine and acetylhydrazine in micellar media using the H-point standard addition method.

The H-point standard addition method (HPSAM), based on a spectrophotometric measurement for the simultaneous determination of hydrazine and acetylhydrazine, is described. This method is based on the difference between the rates of their reactions with N,N-dimethylaminobenzaldehyde (DAB) in the presence of sodium dodecyl sulfate (SDS) in acidic media. The results showed that hydrazine and acetylhydrazine could be determined simultaneously in the range of 0.020 - 0.70 and 0.20 - 5.0 mg L(-1), respectively. Under the working conditions, the proposed method was successfully applied to the simultaneous determination of hydrazine and acetylhydrazine in several synthetic mixtures and plasma and water samples.     

A convenient synthesis of a selective gelatinase inhibitor as an antimetastatic agent

Compound 1, 2-(4-phenoxyphenylsulfonylmethyl)thiirane, is a potent and selective inhibitor for human gelatinases (J. Am. Chem. Soc. 2000, 122, 6799-6800), enzymes implicated in a number of diseases, including cancer. This compound is showing excellent promise in animal trials in a number of disease models. Large quantities of this compound were necessary for these studies. A convenient four-step synthetic route for compound 1 is described herein. The synthesis is amenable to scale-up to tens of grams and gives an overall yield of 57% for this important compound.     

On the mechanism of growth of cells (Bacillus amyloliquefaciens) in the mixed aqueous two-phase system

The growth ofBacillus amyloliquefaciens in the aqueous two-phase system, made up of polyethylene glycol, dextran, and water, was investigated. Generally,Bacillus partitions in the dextran phase, but the magnitude of the separation depends largely on the overall composition of polymers in the phase system. The kinetics of growth ofBacillus amyloliquefaciens was studied in the polyethylene glycol-rich continuous phase, dextran-rich dispersed phase, and in the mixed phase. From the kinetic data it appears that increasing the overall polymer composition causes the cells to adsorp at the interface. On the other hand, partition measurements indicate that increasing polymer concentrations make the cell partitioning more one-sided. This anomaly is explained by studying the interfacial adsorption of cells via dynamic surface tension measurements.     

Spectrophotometric determination of trace amounts of selenium with catalytic reduction of bromate by hydrazine in hydrochloric acid media

A method is presented for the determination of selenium, based on the catalytic effect of selenium(IV) on the reduction reaction of BrO(-)(3) by N(2)H(4).2HCl. The decolourization of Methyl Orange by the reaction products was used to monitor the reaction spectrophotometrically at 525 nm. This method is precise, highly sensitive, simple, rapid, widely applicable and selective for the determination of selenium(IV) and total selenium. The variables which affected the reaction rate were fully investigated and the optimum conditions were established. Selenium, as low as 1 ng/ml, can be determined by this method. The relative standard deviation of 20 ng of selenium was 0.94% (N = 10). The method was applied to the determination of Se(IV) in a health-care product.     

Spectrophotometric determination of beryllium in water samples after micelle-mediated extraction preconcentration

A new micelle-mediated phase preconcentration method for preconcentration of ultra-trace quantities of beryllium as a prior step to its determination by spectrophotometry has been developed. Chrome Azurol S (CAS) and cetyltrimethylammonium bromide (CTAB) were used as chelating agent and cationic surfactant, respectively. The method evaluates and eliminates the blank bias error present in such procedures using mean centering of ratio spectra. This procedure gives more accurate results than the traditional approach using absorbance values against reagent blank. The optimal extraction and reaction conditions were studied and the analytical characteristics of the method (e.g., limit of detection, linear range, preconcentration and improvement factors) were obtained. Linearity was obeyed in the range of 0.9-18.0 ng mL⁻¹ (1.00 × 10⁻⁷-2.00 × 10⁻⁶ mol L⁻¹) of beryllium. The detection limit of the method is 0.51 ng mL⁻¹ (5.66 × 10⁻⁸ mol L⁻¹) of beryllium. The interference effect of some anions and cations was also tested. The method was applied to the determination of beryllium in spring water samples.     

Simultaneous kinetic spectrophotometric determination of cyanide and thiocyanate using the partial least squares (PLS) regression

The partial least squares (PLS-1) calibration model based on spectrophotometric measurement, for the simultaneous determination of CN⁻ and SCN⁻ ions is described. The method is based on the difference in the rate of the reaction between CN⁻ and SCN⁻ ions with chloramine-T in a pH 4.0 buffer solution and at 30 °C. The produced cyanogen chloride (CNCl) reacts with pyridine and the product condenses with barbituric acid and forms a final colored product. The absorption kinetic profiles of the solutions were monitored by measuring absorbance at 578 nm in the time range 20-180 s after initiation of the reaction with 2 s intervals. The experimental calibration matrix for partial least squares (PLS-1) calibration was designed with 31 samples. The cross-validation method was used for selecting the number of factors. The results showed that simultaneous determination could be performed in the range 10.0-900.0 and 50.0-1200.0 ng mL⁻¹ for CN⁻ and SCN⁻ ions, respectively. The proposed method was successfully applied to the simultaneous determination of cyanide and thiocyanate in water samples.     

Design, synthesis, and evaluation of a mechanism-based inhibitor for gelatinase A

[structure: see text] Matrix metalloproteinases (MMPs), of which 26 are known, have been implicated in a number of pathological conditions, including tumor metastasis. We have previously described the first mechanism-based inhibitor for MMPs (J. Am. Chem. Soc. 2000, 122, 6799-6800), which in chemistry mediated by the active site zinc ion selectively and covalently inhibits MMP-2, -3, and -9. Computational analyses indicated that this selectivity in inhibition of MMPs could be improved by design of new variants of the inhibitor class. We report herein the syntheses of methyl 2-(4-{4-[(2-thiiranylpropyl)sulfonyl]phenoxy}phenyl)acetate (3) and 2-(4-{4-[(2-thiiranylpropyl)sulfonyl]phenoxy}phenyl)acetic acid (4), and show that compound 3 serves as a mechanism-based inhibitor exclusively for MMP-2. This molecule should prove useful in delineating the functions of MMP-2 in biological systems.