Commutant Lifting Theorem for the Bergman Space

The central question of this paper is the one of finding the right analogue of the Commutant Lifting Theorem for the Bergman space L_a². We also analyze the analogous problem for weighted Bergman spaces L_a,α², − 1 < α < ∞.     

Binding energy of impurity states in an inverse parabolic quantum well under magnetic field

 We have investigated the effects of the magnetic field which is directed perpendicular to the well on the binding energy of the hydrogenic impurities in an inverse parabolic quantum well (IPQW) with different widths as well as different Al concentrations at the well center. The Al concentration at the barriers was always x_max=0.3. The calculations were performed within the effective mass approximation, using a variational method. We observe that IPQW structure turns into parabolic quantum well with the inversion effect of the magnetic field and donor impurity binding energy in IPQW strongly depends on the magnetic field, Al concentration at the well center and well dimensions.     

Electrochemical Polymerization of Aniline at Low Supporting-Electrolyte Concentrations and Characterization of Obtained Films

Conductive polymers of aniline were synthesized in aqueous acidic media such as perchloric, sulfuric, hydrochloric, phosphoric, and trifluoroacetic acids and the effect of supporting electrolyte was investigated. The conductivity of each polyaniline (PAn) sample was determined by the four-probe technique. PAn (H₂SO₄) sample was shown to have the highest conductivity, specifically, 3.55 S cm^–1. The effect of concentrations of monomers and acids on the conductivity of PAn's was studied. It was observed that the conductivity decreased with increasing aniline concentration and increased with increasing sulfuric acid concentration. The conductivities of PAn (CF₃COOH) were also investigated in different supporting electrolytes and highly good increments of its conductivities were obtained. Magnetic properties of the PAn salts were analyzed by Gouy balance measurements and it was found that their conducting mechanisms are of bipolaron nature. From the FTIR analysis it was found that polymerization occurs via the –NH₂ group in a head-to-tail mechanism. The thermal analyses revealed that PAn (HCl) among the PAn salts studied shows the highest thermal stability. Surface analyses of polymers were clarified by scanning electron microscopy. From elemental analysis results, PAn salts were concluded to be in emeraldine structure.     

The reactions of tellurium tetrahalides with triphenylphosphine under ambient conditions

The reactions of tellurium tetrahalides and triphenylphosphine in tetrahydrofuran have been carried out under ambient conditions and afford [(Ph(3)PO)(2)H](2)[Te(2)X(10)] [X = Cl (1), Br (2)] and [(Ph(3)PO)(3)(OH(3)])(2)[TeI(6)] (4). The X-ray structures of 1 and 2 show that they are isostructural and contain discrete [Te(2)X(10)](2-) anions exhibiting octahedral coordination around both tellurium atoms with one shared edge and [Ph(3)POH...OPPh(3)](+) cations that show strong hydrogen bonds (the O...O distances are 2.399 and 2.404 A for 1 and 2, respectively). The compound 4 is built up with discrete octahedral hexaiodotellurate anions and [(Ph(3)PO)(3)(OH(3))](+) cations. The reaction of TeBr(4) and PPh(3) also results in the formation of formally zwitterionic Ph(3)PO(CH(2))(4)TeBr(4) (3). This reaction involves an unprecedented THF ring opening in which the oxygen atom becomes bonded to the phosphorus atom of triphenylphosphine and the carbon atom at the other end of the five-atomic chain becomes bonded to the tellurium atom of TeBr(4). The ring opening of the solvent THF is also taking place in the reaction involving tellurium tetraiodide, as indicated by the formation of C(4)H(8)TeI(2) (5). The reaction may initially lead to Ph(3)PI(2) that reacts with THF yielding Ph(3)PO and ICH(2)(CH(2))(2)CH(2)I. The latter species reacts with elemental tellurium producing 5. Depending on the conditions upon crystallization, two polymorphs of C(4)H(8)TeI(2) (5a and 5b) are observed. While the molecular structures of the two forms are virtually identical, their packing and intermolecular contacts are different. Two further minor products (6a and 6b) were isolated in the reaction of TeI(4) and PPh(3): Both are formally 1:1 adducts of 5 and TeI(4), but they differ considerably in their structures. 6a can be formulated as [C(4)H(8)TeI(+)](2)[Te(2)I(10)(2-)] and 6b as [C(4)H(8)TeI(+)](2)(TeI(3)(+))(2)(I(-))(4). The latter compound exhibits framework similar to that of the tetramers in gamma- and delta-TeI(4).     

A new thermostable peroxidase from garlic Allium sativum

Analysis of peroxidase activity by native polyacrylamide gel electrophoresis (PAGE) from a garlic bulb (Allium sativum L) extract showed two major activities (designated POX1 and POX2). The POX2 isoenzyme was purified to homogeneity by ammonium sulfate precipitation, gel filtration, and cation-exchange chromatography. The purified enzyme was found to be monomeric with a molecular mass of 36.5 kDa, as determined by sodium dodecyl sulfate-PAGE. The optimum temperature ranged from 25 to 40 degrees C and optimum pH was about 5.0. The apparent Km values for guaiacol and H2O2 were 9.5 and 2 mM, respectively. POX2 appeared highly stable since 50% of its activity was conserved at 50 degrees C for 5 h. Moreover POX2 was stable over a pH range of 3.5-11.0. Immobilization of POX2 was achieved by covalent binding of the enzyme to an epoxy-Sepharose matrix. The immobilized enzyme showed great stability toward heat and storage when compared with soluble enzyme. These properties permit the use of this enzyme as a biosensor to detect H2O2 in some food components such as milk or its derivatives.     

Toxic and trace element analysis of surface sediments from the Gulf of Saros by INAA and XRF methods

Some surface sediment samples, collected from 53 sampling sites of the Saros Gulf, were analyzed quantitatively by radioisotope energy dispersive X-ray fluorescence (EDXRF) and instrumental neutron activation analysis (INAA). Results indicated some correlations between Rb and Sr (r = 0.64), Fe₂O₃ and MnO (r = 0.59), Th and La (r = 0.71), Th and Ce (r = 0.64), Th and Sm (r = 0.60), concentration pairs. U and Th results are found to be compatible with those given in the literature for marine sediments.     

Physico-chemical and thermochemical studies of the hydrolytic conversion of amorphous tricalcium phosphate into apatite

The conversion of amorphous tricalcium phosphate with different hydration ratio into apatite in water at 25 °C has been studied by microcalorimetry and several physical-chemical methods. The hydrolytic transformation was dominated by two strong exothermic events. A fast, relatively weak, wetting process and a very slow but strong heat release assigned to a slow internal rehydration and the crystallization of the amorphous phase into an apatite. The exothermic phenomenon related to the rehydration exceeded the crystalline transformation enthalpy. Rehydration occurred before the conversion of the amorphous phase into apatite and determined the advancement of the hydrolytic reaction. The apatitic phases formed evolved slightly with time after their formation. The crystallinity increased whereas the amount of HPO₄²⁻ ion decreased. These data allow a better understanding of the behavior of biomaterials involving amorphous phases such as hydroxyapatite plasma-sprayed coatings.     

Quantification of antimony depth profiles in Sb-doped tin dioxide thin films

Sb-doped SnO(2) thin films, deposited by atomic layer epitaxy (ALE) for gas sensor applications, have been characterized by secondary ion mass spectrometry (SIMS). Quantification of the depth profile data has been carried out by preparing a series of ion implanted standards. Average concentrations determined by SIMS have been compared with Sb/Sn ratios obtained by X-ray fluorescence (XRF) spectrometry and proton induced X-ray emission (PIXE) spectrometry and have been found to be in good agreement. However, a detection limit of 5x10(18) at cm(-3) could only be obtained because of mass interferences. SIMS data show that the ALE technique can be used to produce a controllable growth and doping of thin films.     

Determination of lead concentration and film thickness in electroluminescent calcium sulfide thin films by X-ray fluorescence

Summary For the analysis of electroluminescent thin films, X-ray fluorescence (XRF) provides a convenient method as both the concentration of the dopant and the film thickness can be determined rapidly and non-destructively. An XRF method for the determination of thickness and lead concentration in lead doped calcium sulfide thin films was developed. Calibration standards made of polyvinyl alcohol and gelatin as well as filter paper standards were used. In addition, the applicability of a fundamental parameter program UniQuant was investigated. For comparison, the concentrations of lead and calcium were determined after dissolution by atomic absorption spectrometry. Generally, the correlation between the different methods excluding the use of filter paper standards was satisfactory. When the dopant concentration was very low or very high, however, the fundamental parameter program yielded best results. Determination of thicknesses by XRF was made by comparing the sulfur K intensities of the sample and those of a zinc sulfide standard. A correction factor for molar masses and densities was applied. The thicknesses obtained were compared to those measured with a profilometer after etching and the deviations were found to be less than 10%.Dedicated to Professor Dr. Wilhelm Fresenius on the occasion of his 80th birthday     

Simple preparation of iron stabilized carboxonium ions. Concurrent complexation,rearrangement and alcohol addition to terminal acetylenes

CpFe(CO)₂[C(OEt)R]BF₄ complexes can be prepared by reaction of CpFe(CO)₂(isobutylene)BF₄ with monoalkylated acetylenes in methylene chloride/ethanol solutions. Methyl propiolate yields methyl trans-2-ethoxy-acrylate, in a reaction catalytic in CpFe(CO)₂(isobutylene)BF₄, and internal acetylenes can be transformed to CpFe(CO)₂(vinyl ether)BF₄ complexes.