Modification in physical properties of organo clay filled polyurethane nanocomposites

Polyurethane (PU) have been prepared by using polyether polyol (jagropol oil) and 1,6-hexamethylene diisocyanate (HMDI) as a cross-linker. The organically modified montmorillonite clay (o-MMT) is well dispersed into urethane matrix by in-situ polymerization method. A series of PU/o-MMT nanocomposites have been prepared by varying amounts viz., 1, 3, 5 and 6 wt % of nanoclay. The mechanical properties such as tensile strength, percentage elongation at break and tensile modulus of the composites were experimentally determined. The swelling behavior of the composites has been studied in different organic solvents. It was noticed that the swelling data of the composites significantly depends on the solubility parameters of the solvents. Microcrystalline parameters such as, lattice strain (g in %), average number of unit cells (〈N〉) in direction perpendicular to Bragg plane, surface weighted crystal size (D _s) and interplanar distance (d _hkl ), were calculated from X-ray patterns. These parameters were computed using Exponential asymmetric column length distribution functions. Morphological features of cryofractured PU/o-MMT composites were also analyzed using scanning electron microscopy (SEM).     

Silver nanoparticles supported on ionic‐tagged magnetic hydroxyapatite as a highly efficient and reusable nanocatalyst for hydrogenation of nitroarenes in water

A novel chemically modified magnetic hydroxyapatite (MHAp) was prepared and used as support and stabilizer for the synthesis of silver nanoparticles. First, 1,4‐diazabicyclo[2.2.2]octane (DABCO) was successfully grafted onto the surface of MHAp, and then silver nanoparticles were homogeneously loaded on mesoporous MHAp‐DABCO (ionic‐tagged MHAp) nanocomposite by in situ chemical reduction of silver nitrate using sodium borohydride. The structure and properties of the resulting MHAp‐DABCO‐Ag nanocomposite were confirmed using various techniques. The catalytic activity of ionic‐tagged MHAp‐Ag nanocatalyst was investigated for the hydrogenation reaction of nitroarenes in aqueous media. The results reveal that the Ag‐containing inorganic–organic nanocomposite is highly efficient for the reduction of a wide range of aromatic nitro compounds under green conditions. The superparamagnetic nature of the nanocatalyst leads to its being readily removed from solution via application of a magnetic field, and it can be easily stored and reused.     

Rapid production of monodisperse cross-linked red blood corpuscle-like particles via scalable one-pot dispersion polymerization

Cross-linked polystyrene (PS) particles having red blood corpuscle (RBC)-like shape were synthesized by one-pot dispersion polymerization of styrene with ethanol/water mixture and ethylene glycol dimethacrylate (EGDMA) as the reaction medium and cross-linker, respectively. Monitoring of the reaction showed that RBC-like shape forms due to asymmetric shrinkage of a cross-linked network during the phase separation. In addition, three dimensional phase diagram was generated based on the yielded data that showed that the formation of such unique shape extremely depends on the polarity of the medium and injection time of the cross-linker. In situ synthesis of RBC-like particles, as promising biomaterials in targeted drug delivery and a model for the understanding of the cell behavior, via such fast and high solid content approach makes it to be conducive to subsequent scale up, i.e. potential commercial adoption.     

Nonlinear vibration mitigation of a flexible rotor shaft carrying a longitudinally dispositioned unbalanced rigid disc

Nonlinear Dynamics - This study is dedicated to investigate the nonlinear dynamics of a system composed of a flexible rotor shaft carrying a longitudinally dispositioned unbalanced rigid disc. The...     

Nano-sized layered aluminium or zinc-manganese oxides as efficient water oxidizing catalysts

Nano-sized layered aluminium or zinc-manganese oxides were synthesized and characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction spectrometry, dynamic light scattering and atomic absorption spectroscopy. These oxides showed efficient water oxidizing activity in the presence of cerium(IV) ammonium nitrate as a non-oxo transfer oxidant. Amounts of dissolved manganese, zinc or aluminium, and water oxidation activities of these oxides were reported and compared with other manganese oxides. A mechanism for oxygen evolution and possible roles for zinc or aluminium ions are also proposed.     

Engineered mesoporous ionic‐modified γ‐Fe2O3@hydroxyapatite decorated with palladium nanoparticles and its catalytic properties in water

A new mesoporous organic–inorganic nanocomposite was formulated and then used as stabilizer and support for the preparation of palladium nanoparticles (Pd NPs). The properties and structure of Pd NPs immobilized on prepared 1,4‐diazabicyclo[2.2.2]octane (DABCO) chemically tagged on mesoporous γ‐Fe₂O₃@hydroxyapatite (ionic modified (IM)‐MHA) were investigated using various techniques. The synergistic effects of the combined properties of MHA, DABCO and Pd NPs, and catalytic activity of γ‐Fe₂O₃@hydroxyapatite‐DABCO‐Pd (IM‐MHA‐Pd) were investigated for the Heck cross‐coupling reaction in aqueous media. The appropriate surface area and pore size of mesoporous IM‐MHA nanocomposite can provide a favourable hard template for immobilization of Pd NPs. The loading level of Pd in the nanocatalyst was 0.51 mmol g^?1. DABCO bonded to the MHA surface acts as a Pd NP stabilizer and can also lead to colloidal stability of the nanocomposite in aqueous solution. The results reveal that IM‐MHA‐Pd is highly efficient for coupling reactions of a wide range of aryl halides with olefins under green conditions. The superparamagnetic nature of the nanocomposite means that the catalyst to be easily separated from solution through magnetic decantation, and the catalytic activity of the recycled IM‐MHA‐Pd showed almost no appreciable loss even after six consecutive runs.     

Calcium manganese(IV) oxides: biomimetic and efficient catalysts for water oxidation

CaMnO(3) and Ca(2)Mn(3)O(8) were synthesized and characterized by SEM, XRD, FTIR and BET. Both oxides showed oxygen evolution activity in the presence of oxone, cerium(IV) ammonium nitrate and H(2)O(2). Oxygen evolution from water during irradiation with visible light (λ > 400 nm) was also observed upon adding these manganese oxides to an aqueous solution containing tris(2,2'-bipyridyl) ruthenium(II), as photosensitizer, and chloro pentaammine cobalt(III) chloride, as electron acceptor, in an acetate buffer. The amounts of dissolved manganese and calcium from CaMnO(3) and Ca(2)Mn(3)O(8) in the oxygen evolving reactions were reported and compared with other (calcium) manganese oxides. Proposed mechanisms of oxygen evolution and proposed roles for the calcium ions are also considered.     

Synthesis of multiresponsive β‐cyclodextrin nanocomposite through surface RAFT polymerization for controlled drug delivery

In this study, a unique magnetic, pH, and thermo‐responsive hydrogel nanocomposite was synthesized via surface reversible addition fragmentation chain transfer (RAFT) copolymerization of acrylic acid (AA) and N‐isopropyl acrylamide (NIPAM) in the presence of magnetic β‐cyclodextrin (β‐CD). The nanocomposite demonstrated a pH‐responsiveness behavior at pHs 3 and 9. Moreover, swelling behaviors of nanocomposite were measured in solutions with various temperatures. Furthermore, the nanocomposites exhibited high swelling capacity by applying an external magnetic field because of the presence of Fe₃O₄ nanoparticles in the polymer structure. Besides, the doxorubicin (DOX) loading and releasing behaviors of the hydrogel nanocomposites were studied because of the stimuli‐responsive properties of the synthesized carriers. The adsorption of DOX obeyed a pseudo‐second‐order model and fitted well to the Langmuir isotherm model with the maximum adsorption capacity uptake of 291 mg g^?1. In conclusion, the hydrogel nanocomposites were found to be as potential nanocarriers for use in controlled release applications.     

Application of homotopy perturbation method to the RLW and generalized modified Boussinesq equations

In this Letter, He's homotopy perturbation method (HPM) is implemented for finding the solitary-wave solutions of the regularized long-wave (RLW) and generalized modified Boussinesq (GMB) equations. We obtain numerical solutions of these equations for the initial conditions. We will show that the convergence of the HPM is faster than those obtained by the Adomian decomposition method (ADM). The obtained solutions, in comparison with the exact solutions admit a remarkable accuracy. A clear conclusion can be drawn from the numerical results that the HPM provides highly accurate numerical solutions for nonlinear differential equations.     

Fabricating and improving properties of copper matrix nanocomposites by electroless copper-coated MWCNTs

In this study, copper (Cu) nanocomposites reinforced by coated multiwall carbon nanotubes (MWCNTs) have been fabricated with different weight fractions of MWCNT. In the first step, the as-received MWCNTs were coated with Cu using electroless deposition process. In the next step, combination of sonication and ball milling (with two milling time of 1.5 and 3 h) was used for preparing MWCNT/Cu composite powders. Finally, the disk-shaped specimens were sintered by hot-press sintering machine. Characterization of sintered nanocomposites revealed that increasing milling time led to improved mechanical properties, but higher defect density on the MWCNT sidewalls is obtained which is especially undesirable for electrical properties of nanocomposite. Our results indicated that simultaneous improvements of interface reactions and distribution uniformity of MWCNTs and Cu are key factors for obtaining enhanced mechanical properties. Accordingly, enhancement of up to ~150 and ~86 % in microhardness compared to pure Cu and 1 wt% as-received MWCNT/Cu was achieved by addition of 1 wt% Cu-coated MWCNT. On the contrary, existence of oxygen atoms in the Cu and coated MWCNT interface (from functional groups and deposited copper oxide) obstructs considerable improvement of electrical resistivity compared to as-received MWCNT/Cu nanocomposites.