Fatigue Loading and Life Prediction in Three Fretting Fatigue Fixtures

Three fixtures for conducting laboratory fretting fatigue tests are described and their respective testing methods and the results of the analysis are compared. Each of these fixtures has been used to investigate the effects of various parameters of interest in fretting fatigue. These fixtures include a unique apparatus in which all load applied to the specimen is transferred to the fretting pads, an apparatus similar to many found in the literature where partial load transfer occurs across the pads, and a simplified dovetail fixture in which the clamping load, P, and the shear load, Q, are varied in phase. Select test conditions from prior experiments performed on identical material and resulting in similar lives ranging from one to ten million cycles from these fixtures are identified. The various testing conditions were used to compute the unique stress field for each case. The resulting contact stresses were used to calculate crack initiation based criteria, and to calculate stress intensity factors. The three fixtures were shown to be able to accommodate a range of loads, fretting pad contours, and specimen geometries that produced a variety of stress fields. A crack-initiation-based criterion was shown to predict the failure lives of thinner specimens accurately. The stress intensity factor calculations showed the possibility of a crack arresting for a stress field that decays rapidly and the possibility of a local minimum for K as a function of depth. The fixtures are shown to be complementary in generating data for development of robust fretting fatigue models that use these criteria.     

Determination of 22 triazole compounds including parent fungicides and metabolites in apples, peaches, flour, and water by liquid chromatography/tandem mass spectrometry

A liquid chromatography/tandem mass spectrometry (LC/MS/MS) method has been developed for the determination of 14 parent triazole fungicides and 8 of their metabolites found in apples, peaches, flour, raw water, and tap water. The triazole fungicides chosen for this multiresidue method development project included propiconazole, fenbuconazole and its RH-9129 and RH-9130 metabolites, cyproconazole, difenoconazole, tebuconazole and its HWG 2061 metabolite, hexaconazole, bromuconazole (both stereoisomers), epoxiconazole, tetraconazole, triticonazole and its RPA-404886 and RPA-406341 metabolites, triadimefon, triadimenol, and myclobutanil. Of special concern to the U.S. Environmental Protection Agency were the metabolites common to all triazole fungicides: free triazole, 1,2,4-triazole (T), and its 2 conjugates: triazolylalanine (TA) and triazolylacetic acid (TAA). These metabolites were the primary focus of this project. All samples we cleaned up by a combination of C18 solid-phase extraction (SPE), mixed-mode cationic SPE, and mixed-mode anionic SPE columns. A triple-stage quadrupole mass spectrometer, equipped with electrospray ionization in the positive-ion mode, was used to determine the compounds of interest. T, TA, and TAA were quantitated using isotopically labeled internal standards (IS), in which the 1,2,4-triazole ring had been synthesized by using 13C and 15N (IS_T, IS_TA, and IS_TAA). These isotopically labeled internal standards were necessary to correct for matrix effects. The T, TA, and TAA metabolites were quantitated at the 25-50 parts-per-billion (ppb) level in food commodities and at 0.50 ppb in water. Recoveries were 70-101% from apples, 60-121% from peaches, 57-118% from flour, 75-99% from raw water, and 79-99% from tap water.     

Adamantane-like cluster complexes of mixed-valent copper-copper and nickel-copper thiolates

Square-planar copper(II) and nickel(II) derivatives of the cis-dithiolate N(2)S(2) ligand bis(N,N'-2-mercapto-2-methylpropyl)-1,5-diazocyclooctane, (bme*daco)M, nucleate four Cu(I)Cl moieties, forming M(II)(2)Cu(I)(4)S(4) clusters with unusual triply bridging thiolates, mu(3)-SR, in the topological form of adamantane. As determined by X-ray crystallography, the (bme*daco)M (M = Cu or Ni) metallothiolate serves as a bidentate ligand that bridges four Cu(I) ions, utilizing all lone pairs on sulfurs. Further characterization by electrochemical and electronic spectral measurements suggests greater electron delocalization in the all-copper complex as compared to the NiCu heterometallic complex. Mass spectral data imply that the mixed-metal Ni(II)(2)Cu(I)(4)S(4) is more stable toward CuCl loss than Cu(II)(2)Cu(I)(4)S(4), a result that is corroborated by extraction of Cu(I) by 1,2-bis(diphenylphosphino)ethane in the latter but not the former.     

Chlorine nitrate photolysis by a new technique: very low pressure photolysis

Very low pressure photolysis (VLPØ) of chlorine nitrate was performed in a quartz Knudsen cell. The light source was a 2500 W high-pressure xenon lamp, and a modulated molecular-beam mass spectrometer was used to monitor the concentration of ClONO₂ and photolysis products. Because of the low pressures used (? 10^?3 torr) and the short residence time in the cell (≈1 s), secondary reactions were unimportant and the primary products could be directly identified. The primary photolysis products (λ ≈ 2700 Å) are atomic chlorine and NO₃ free radical. Chlorine atoms were identified both by the appearance of Cl₂ (wall recombination product; the walls were not poisoned) and by HCl produced when C₂H₆ was added to the cell. Nitrate free radical was directly identified as a mass peak at m/e = 62, as well as by chemical titration with nitric oxide: NO₃ + NO → 2NO₂. It was verified by direct tests that the peak at m/e = 62 did not arise from possible HNO₃ contamination or from N₂O₅, a possible secondary product. This titration reaction was used to measure quantitatively a lower limit to the primary quantum yield, φ ? 0.5 ± 0.3. This represents a lower limit because of the unknown extent of the secondary photolysis of NO₃ under our conditions. We believe this to be the first observation using mass spectrometry of the NO₃ free radical. The quantum yield for atomic chlorine is φ = 1.0 ± 0.2. N₂O was used to test for O(¹D) according to the reaction, O(¹D) + N₂O → products; none was observed. Triplet oxygen, O(³P) was observed to the extent of ≈ 10% by the reaction O(³P) + NO₂ → NO + O₂, but this yield can also be due to the photolysis of NO₃ free radical produced in the primary step. We conclude that the predominant reaction pathway is

.     

Design and evaluation of a Dean vortex-based micromixer

A mixer, based on the Dean vortex, is fabricated and tested in an on-chip format. When fluid is directed around a curve under pressure driven flow, the high velocity streams in the center of the channel experience a greater centripetal force and so are deflected outward. This creates a pair of counter-rotating vortices moving fluid toward the inner wall at the top and bottom of the channel and toward the outer wall in the center. For the geometries studied, the vortices were first seen at Reynolds numbers between 1 and 10 and became stronger as the flow velocity is increased. Vortex formation was monitored in channels with depth/width ratios of 0.5, 1.0, and 2.0. The lowest aspect ratio strongly suppressed vortex formation. Increasing the aspect ratio above 1 appeared to provide improved mixing. This design has the advantages of easy fabrication and low surface area.     

Thermal decomposition of trans-chloro(2-allylphenyl)bis(triethylphospine)nickel(II)

Thermolysis of trans-chloro(2-allylphenyl)bis(triethylphosphine)nickel(II), I, in tetrachloroethylene has afforded indene as the major hydrocarbon product along with lesser amounts of allylbenzene and trans-β-methylstyrene. Organonickel products were trans-chloro(trichlorovinyl)bis(triethylphosphine)nickel(II), II, chloro[2-(trans-propenyl)phenyl]bis(triethylphosphine)nickel(II), III, and trans-dichlorobis(triethylphosphine)nickel(II). Compound III was the major product from thermolysis of I in benzene. Chloro[2-(cis-propenyl)phenyl]bis(triethylphosphine)nickel(II), IV, and III could be synthesized independently by treatment of chloro-2-(cis-propenyl)benzene and chloro-2-(trans-propenyl)benzene, respectively, with nickel acetylacetonate and triethylaluminium in the presence of triethylphosphine. Thermolysis of I in benzene containing allylbenzene led to the formation of trans-β-methylstyrene. The thermolysis of I in benzene in the presence of cis-1,4-hexadiene caused the skeletal rearrangement of the diene to trans-2-methyl-1,3-pentadiene. A catalyst derived from ethylenebis(triphenylphosphine)nickel(0) and hydrogen chloride isomerized allylbenzene to trans-β-methylstyrene.